dams SHL301K2-G User manual

SHL301K2-G/K
Please read this manual carefully before use and store in a safe place.
Assembly Instructions
SHL300K2-G/K

Assembly note:
Contact Dams if you require any further
assistance.
At least two people are required.
Use a protective mat and handle the product
with care.
Note:
23
1

1
2
3
4
5
6
7
headrest
backrest
back frame
seat
armrest
gas lift
five-star base
caster
No. Name Pcs
mechanism
9
8
Exploded
diagram:

Accessory list:
hex
half-round
head screws
2
φ6
spring
gasket
gasket 2 φ6 2 cap
1/4*3/2 6
internal/external
hex screw 3M8*20
three-in-one
internal/external
hex screw
14#
Allen key
with round ball 15#
Allen key
with round ball
A B
DC
E F
G H
NOTE: Two of these screws
pre-installed on the headrest when
ordered (supplied in a separate box)

1
(X2)
D
C
A*2
B*2
C*2
D*2
M6*20
(X2)
A
(X2)
B
(X2)
3
2
B
A
C
1. Use half-round head hex screw, spring gaskets and gaskets to assemble the backrest
and back frame.
snap the backrest into the slot of back frame
fix the back frame and backrest's adjuster with the
back frame

2
1/4*3/2(X6)
E
4
5
9
E*3
E*3
1. Use internal/external hex screws to fix the seat and armrest.

3
F*3
4
5
2
3
9
M8*20(X3)
F
1. Use three-in-one internal/external hex screws to fix the fully-assembled back with the seat.

4
2
5
4
3
9
7
8
6
1. Align the castors with the holes of five-star base. Put the gas lift into the round
holes of five-star base.

5
A*2
M6*20
(X2)
A
2
1
1. First loosen two screws pre installed on the headrest,and then use hex half-round-head
screws to fix the headrest.
NOTE:Headrest is supplied in a separate box.

Done！