dams SWY300K2-G User manual

Please read this manual carefully before use and store in a safe place.
Assembly Instructions
SWY300K2-G

Assembly note:
Contact Dams if you require any further
assistance.
At least two people are required.
Use a protective mat and handle the product
with care.
Note:
23
1

Accessory list:
2
M8*35
Hex Screw 2
M6*16
Hex Screw
Hexagon Socket
Set Screws with
Cone Point
2
M8*10
Allen key 1
5#
A B
DC
E
Allen key 14#

1
1.Use hexagon socket set and screws with cone point to assemble the backrest and mechanism.
C*2
D*1

2
2.Use hex screws to assemble mechanism with backrest to the seat .
B*2
A*2
E*1

3
3.Align the castors with the holes of five-star base. Put the gas lift into the round holes of five-star
base.

Done！

Function introduction:
1.Lateral back movement
Unique dynamic mechanism that allows for side-to-side movement, which helps users with
twisting into unnatural positions to grab something that is just out of reach.
2.Adjustable arms
The arms can be adjusted up and down by holding down the button under the arm rest.
Then move the arm rests left or right to suit any preferred position.
3.Tilting mechanism
The backrest can be adjusted and locked to different positions with the lever, to provide
users with advanced support for the spine and pelvis.
4.Seat height adjustment
Upward: Get up from the chair and pull the controlling lever to lift the seat to the appropriate
height.
Downward: Press down and pull the controlling lever to lower the seat to the appropriate
height.