Dors 210 User manual

210
210
EBKM.00D250.00.00.000-02UMCMYK Pantone 293
AUTOMATIC DETECTOR
AUTOMATIC DETECTOR
Production date:
2018
User Manual
Version 0 USER MANUAL
www.dors.com

Black
DORS 210 AUTOMATIC DETECTOR 3
Contents
Customer Information............................................................................................ 4
Purpose................................................................................................................... 4
Important Information............................................................................................ 5
Delivery Set............................................................................................................. 6
Appearance............................................................................................................ 6
Detector Operation................................................................................................. 7
Preparing for Operation...................................................................................... 7
Operation........................................................................................................... 7
Authenticity Verification...................................................................................... 8
Report................................................................................................................ 9
Operation of Detector from Built-in Battery........................................................... 9
Settings................................................................................................................... 9
Output Tray Installation.......................................................................................... 10
Switch the Detector off........................................................................................... 11
Service Maintenance.............................................................................................. 11
Error Messages.................................................................................................. 11
Troubleshooting................................................................................................. 14
Specifications......................................................................................................... 14
Preventive Maintenance......................................................................................... 15
Transportation and Storage................................................................................... 16
Support and Warranty............................................................................................. 17
Warranty Terms....................................................................................................... 18
FOR NOTES
EBKM.00D250.00.00.000-02UM

Black
5
4
Thank you for having chosen DORS 210 automatic detector.
The device is designed for authenticity verification of banknotes of various
currencies with automatic recognition of their denomination. It is not necessary to
choose either a banknote side or its orientation before placing the banknote for
authentication in the device.
The detector automatically sums the authentication results of the verified authentic
banknotes.
The automatic detector DORS 210 (hereinafter detector) is manufactured by
DORS Industries (China) Ltd., Shilong Business Center, Shilong Information
Industrial Park, Building 17, the city of Dongguang, the province of Guangdong, China.
READ THIS MANUAL CAREFULLY
BEFORE OPERATION!
IMPORTANT INFORMATION
To ensure long lifespan and reliable operation of the detector, observe the
following safety precautions:
1. Avoid a getting of metal objects or any liquids into the detector.
2. Switch the detector off after work is completed.
3. If the detector has been out of use for a long time, its AC adapter shall be
unplugged from the mains.
4. Use only the AC adapter supplied with the device to connect the detector to the
mains.
5. The detector shall be installed on an even horizontal surface.
6. There shall be some free space behind the detector for an output of a banknote, if
there is no output tray.
7. Do not use the detector at extremely low or high temperatures, high humidity and
exposing to the direct sunlight.
8. If the detector is connected to the mains, do not touch its inside parts.
9. When installing the detector, mind that a high level of dust content may have
negative impact on its operation.
10. Do not install the detector where it may have a potential impact of either soot or
steam as it may result in a short circuit or fire.
CUSTOMER INFORMATION
The detector DORS 210 is designed for authenticity verification of banknotes of
various currencies of all denominations. The authentication is based on presence and
location of visible, infrared, ultraviolet, anti-Stokes (if available), magnetic marks and
spectral analysis of the inks.
The decision about authenticity of a banknote is made on the integral performance
index.
The detector’s basic software allows to verify simultaneously several currencies –
the exact list of currencies depends on the software version and currency template of
device.
PURPOSE
DORS 210 AUTOMATIC DETECTORDORS 210 AUTOMATIC DETECTOR
EBKM.00D250.00.00.000-02UM

Preparing for operation:
1. Make sure that the safety precautions given in the
corresponding section of Manual have been taken
in consideration;
2. If the detector works from the battery*, please go to item 5;
3. Connect AC adapter to the corresponding detector jack;
4. Plug AC adapter to the mains socket;
5. If required, install the removable stopper included
in the delivery set. It can also be installed any time
during the operation (see. Fig.2);
6. If required, install the output tray included in the delivery
set. It can also be installed any time during
the operation.
Black
7
6
Automatic detector DORS 210............................................................................. 1 pc.
Stopper................................................................................................................. 1 pc.
Output tray............................................................................................................ 1 pc.
AC adapter........................................................................................................... 1 pc.
User manual......................................................................................................... 1 pc.
Package............................................................................................................... 1 set
DELIVERY SET
APPEARANCE
4. Display;
5. Input tray;
6. Removable stopper designed to facilitate an input of banknotes to the path;
7. Output tray designed to install the detector in the limited space;
8. Jack for connecting programmer unit;
9. mini-USB jack for connecting to PC (option);
10. AC adapter jack;
11. Output slot (without output tray 7);
12. Output slot (with output tray 7).
1
Back ViewFront View
4
2
7
6
5810 11
12
1. SOUND/OUTPUT DIRECTION key: switching on/switching off the sound signal;
change of mode of banknote's output; indication of different modes of detector;
2. ON/OFF key: detector switching on/switching off; indication of different modes of
detector;
3. REPORT/CLEAR key: access to the report of verified banknotes; clear the results
of the verified banknotes; indication of different modes of detector.
Fig. 1
DETECTOR OPERATION
Operation:
Press ON/OFF key and hold it for 1 second to switch on the detector.
When the detector is switched on, a self-test starts and blue indicator starts
flashing.
As soon as self-test is over, you hear the sound signal (if Sound option is
activated) and the blue indicator switches.
ATTENTION!
It is necessary to open the top cover of the
detector to install and remove the stopper.
4
3
9
* – The detector is equipped with battery at the factory optionally.
EBKM.00D250.00.00.000-02UM
DORS 210 AUTOMATIC DETECTORDORS 210 AUTOMATIC DETECTOR
Fig. 2

TOTAL
DENAUTO
UV MG AS
MAN MIX
BATCH PCS
CURRENCY
Black
98
To verify a banknote, insert it into the input tray to be taken by the pulling rollers. A
banknote has to be aligned to the left side.
The detector captures a banknote and verifies its authenticity.
If the banknote is genuine, the green indicator will switch on, the currency code,
denomination and quantity of verified banknotes of this denomination will be displayed.
If a banknote is recognized as suspicious, it will return into the input tray, the red
indicator will switch on, and the detector will emit a sound signal (if «Sound Signal» or
«Back» direction options is switched on).
Press «SOUND/OUTPUT DIRECTION» key (item 1 Fig. 1) for settings menu.
To switch on/switch off the sound signal press and hold the key for 1 sec., the
SETTINGS
The detector is ready for banknotes verification with recent saved settings. At the
first switching on the detector is ready for the banknotes verification with the factory
settings as follows:
– Sound signal is switched on — item 4 Fig. 3;
– «Back» output mode is switched on — item 5 Fig. 3.
Information on Display:
1. Currency code in accordance with IS04217
standard. If the device supports several
currencies, the «MUL» will appear in the
corresponding field of display. Using
«REPORT/CLEAR» key it is possible to see the
list of currencies supported by this device;
2. The amount of verified banknotes of the last
checked currency;
3. The quantity of verified banknotes of the last
checked currency;
4. Sound signal indicator;
5. Output mode indicator;
6. Battery operation and charge level indicator;
Operation of Detector from Built-in Battery*:
The built-in battery is charged when the detector works from the AC adapter. When
the battery discharges the segments of battery indicator (item 6 Fig. 3) switch on
sequentially.
The number of flashing battery segments demonstrates the actual battery charge
level (all 4 segments are flashing – the battery is completely discharged, all segments
are switched on – the charging process is finished).
The number of switched on segments decreases when the battery is discharging.
When the battery is fully discharged, the battery icon will begin flashing, the time in
seconds will show when the detector will be switched off. The verification process will
be stopped. To proceed the full operation of detector use AC adapter.
Fig. 3
1
2
3
4
5
6
Report:
Press «REPORT/CLEAR» key to view information about the verified banknotes.
At each pressing of the key the information about the denomination and quantity of
verified banknotes of specific currency displays sequentially. At the end of report the
total quantity and amount of verified banknotes of specific currency will be on display.
The repeat pressing of the key will show the report for the next currency (in case of
multicurrency version), or the report for the specific currency from the beginning (in
case of single currency version). The return to the main display mode will be
performed once the scanning of the next banknote starts or automatically in 10 sec.
after the last pressing of «REPORT/CLEAR» key.
Press and hold the REPORT/CLEAR key (item 3 Fig. 1) to clear the data of all
previously verified banknotes.
Attention! The errors may appear when checking genuine wrinkled, unfit, dirty,
washed, broken, taped, de-inked banknotes, banknotes with graffiti and banknotes
being exposed to aggressive environment.
Authenticity Verification:
If the banknote is not recognized as authentic three times, its authenticity shall be
verified by some other methods.
The information about the quantity and amount of verified banknotes of the last
checked currency will appear on display in 5 sec. after the last verification, green or red
indicator will be switched off.
EBKM.00D250.00.00.000-02UM
DORS 210 AUTOMATIC DETECTORDORS 210 AUTOMATIC DETECTOR
* – The detector is equipped with battery at the factory optionally.

Black
1110
To switch the detector off upon operation completion, hold the ON/OFF key (item 2
Fig.1) for more than 1 second. At the next switching on the same settings (sound
signals, output modes, etc.) will be applied as were at switching off.
SWITCH THE DETECTOR OFF
Error Messages
In case of an error, the detector stops automatically, emits a sound signal (if sound
signals are switched on) and a corresponding message appears on the display.
– See the «Error Messages» table to find a reason of the error cause and its
elimination procedure.
– Sometimes, if a problem emerges, the error code is not displayed. In this case refer
to the «Troubleshooting» table to find a way of the problem elimination.
SERVICE MAINTENANCE
Table — «Error Messages»
Messages that appear during self-testing of the detector
Indicator
status Message Reason(s)
of error Elimination procedure
Red and blue
indicators flash
simultaneously.
Message:
«Err Code»
Code parameter can
have different values
depending on the error
type.
Software error of detector initialization. Switch off and then switch on the
detector.
If there is the same error message,
contact your supplier.
The output tray is useful when it is necessary to
install the detector in limited space close by vertical
superficies. The detector is supplied with installed output
tray. If necessary, the user can remove or install the
output tray by himself:
OUTPUT TRAY
INSTALLATION / REMOVAL
corresponding icon will appear on display – it means that the sound is switched on; if
there is no icon on display, the sound is switched off.
Note: the sound indication for suspicious banknote ejection in «Back» output
mode can't be switched off!
The output direction will be changed after short pressing of key 1 Fig. 1. «Back»
means all banknotes are ejected to the input tray. «Forward» means the genuine
banknotes are output through the slot at the back side of detector and are placed
behind the detector (if the output tray is not installed) and through the slot 12 Fig. 1 of
the output tray if it is installed.
Note: For usability and increased verification speed do not install the output tray if
you use «Back» output direction.
To remove the output tray:
1. Switch the detector off;
2. Unplug the detector;
3. Turn upside down the detector and with
a gentle motion remove the output tray
as shown on Fig. 4 (arrow 1 and 2).
To install the output tray:
1. Switch the detector off;
2. Unplug the detector;
3. Turn upside down the detector, install
the catches of the output tray into the
corresponding slots and push the tray
against stop Fig. 4 (arrow 3 ).
Fig. 4 Bottom View
2Remove
output tray
1Move
output tray
3
Match the
catches and the
slots of the output
tray and push
the tray against
stop.
EBKM.00D250.00.00.000-02UM
DORS 210 AUTOMATIC DETECTORDORS 210 AUTOMATIC DETECTOR

Black
1312
«NON» and «CAL»
message one by one
appears in the
«Currency» field.
The detector calibration values have
been reset during operation.
In case of such message it is allowed to
use the detector. Though the higher
rejection rate of banknotes is possible.
The message will disappear at the
beginning of scanning process or after
long pressing of «REPORT/CLEAR»
key.
To deactivate such message and
decrease the rejection rate of
banknotes contact your supplier.
Red indicator
flashes every 3 sec.,
blue indicator
is switched on.
There is no information
about the quantity and
denomination of verified
banknotes in the
corresponding fields
of display.
The banknote (or emission of the
banknote) is not supported by current
currency database version. The banknote
is too worn out or damaged. The
banknote is suspicious. The banknote
has wrong dimensions.
The time limit for verification (the
banknote is stopped in the input tray) is
exceeded.
Please repeat the verification process of
this banknote. If the error message
appears again, the banknote has to be
verified by other way.
Red and blue indicators
are switched on.
The empty battery icon is
flashing, the time in
seconds shows when
the detector will be
switched off.
Denomination and
quantity of verified
banknotes (banknote is
recognized).
There is no information
about the denomination
and quantity on display
(suspicious banknote).
The banknote is jammed because the
banknote is damaged, the feeding rollers
got dirty or a path components are
broken.
Open the top cover. Remove the foreign
objects from the path. Close the top
cover. If the banknote get jammed in the
output tray, switch the detector off,
remove the output tray and remove the
jammed banknote. Install the output tray
on its place. Switch the detector on..
Red indicator is
flashing, blue indicator
is switched on.
No changes. The top cover is not closed tightly.
The scanner window is dirty.
The light guide surface is dirty.
Switch off the detector. Open the upper
cover of the detector. Wipe the light
guide and the scanner with a dry lint
free cloth and remove the foreign
objects from the path. Close the cover
tightly. Switch the detector on.
If there is a repeated error message,
contact your supplier.
Blue indicator
is flashing.
Low battery level. It is necessary to connect the detector
to the mains with AC adapter.
Red and green
indicators
flash simultaneously.
Message: «Егг1»
– drive error.
Stopping of the detector mechanism.
The engine failure or an engine driver
error. There is a pulse transducer
failure or it got dirty.
Switch the detector off. Open its top
cover. Wipe the light guide, scanner
and input tray sensor with a dry lint
free cloth, remove the foreign objects
from the path. Close the cover tightly.
Switch the detector on. If there is a
repeated error message, contact your
supplier.
Message: «Егг2»,
«ЕггЗ», «Егг 5»
— scanner error.
The scanner window got dirty.
The light guide surface got dirty.
Failure of one of the illumination LEDs.
An exposure of the banknote scanned
area to light from powerful source.
A loose detector cover.
Message:
«Егг 4»
– input tray sensor error.
The input tray sensor got dirty.
The failure of LED of input tray sensor.
An exposure of the banknote scanned
area to light from powerful source.
EBKM.00D250.00.00.000-02UM
DORS 210 AUTOMATIC DETECTORDORS 210 AUTOMATIC DETECTOR
Messages that appear during self-testing of the detector
Indicator
status Message Reason(s)
of error Elimination procedure
Table — «Error Messages» Messages that appear during detector operation
Indicator
status Message Reason(s)
of error Elimination procedure

Black
1514
The detector fails to switch on (through AC
adapter).
Check the mains power, AC adapter connection to the power outlet, and AC adapter
connection to the corresponding adapter jack. If these conditions are fulfilled but the
detector fails to switch on, contact your supplier.
The scanning process isn't started when the
banknote is in the input tray.
Align the banknote to the left side of input tray.
If the banknote has corner fold, place the banknote into the input tray thus the start
sensor is covered with the banknote. If these conditions are fulfilled, but the
scanning process isn't started, contact your supplier.
The display shows a message which is not
described in the «Error Messages» table.
Switch the detector off. Contact your supplier.
Banknotes to be verified............................................. The banknotes of different
currencies of all denominations
(quantity and type of currencies
depend on the software version
and currency template of
device);
Note positioning ........................................................ Short side forward, aligned to
the left side of input tray;
Verification speed, min.
(if Forward output mode is activated)......................... 60 notes/min;
Display...................................................................... LC display;
Power supply from AC adapter................................... AC adapter input voltage
100-240 V, -50-60 Hz;
Detector input voltage 12 V;
AC adapter current consumption
up to 0,7 А;
Mains current consumption
up to 0,25 А;
SPECIFICATIONS
Accumulator capacity *..................................................... 2300 mA/h;
Operating temperature range........................................... +10°С to +35°С;
Relative air humidity at +25°С........................................... 40% to 80%;
Air pressure...................................................................... 84 to 107 kPa
(630 to 800 mmHg);
Dimensions, up to............................................................. 115 х 112 х 60 mm;
Path width, up to............................................................... 86 mm;
Detector net weight, up to:
— with battery................................................................... 0.42 kg;
— without battery.............................................................. 0,37 kg;
Delivery set weight, up to................................................... 1.0 kg.
Design and specifications are subject to change sake for product's improvement
without prior notice. A product shown in pictures may differ from a serial product.
PREVENTIVE MAINTENANCE
A preventive maintenance requires a partial disassembling of the detector by a
technician. We recommend to deliver the said maintenance every 90 days. In case of
intensive use of detector (more than 1 shift a day), the maintenance should be
performed more frequently.
On a daily basis:
1. Switch off the detector if it is not used.
2. Wipe the external parts with a dry clean lint free cloth.
On a weekly basis or once three days at an intensive use:
1. Open the detector top cover and wipe with a dry clean lint free cloth the path, the
light guide, the scanner and other sensors indicated on Fig. 5.
Troubleshooting
Elimination procedureProblem
The detector fails to switch on (through battery).
Low battery level.
Connect the AC adapter to the detector, connect
the AC adapter to the mains.
* – The detector is equipped with battery at the factory optionally.
EBKM.00D250.00.00.000-02UM
DORS 210 AUTOMATIC DETECTORDORS 210 AUTOMATIC DETECTOR

Black
1716
2. Switch the detector on and press «On/ Off» key (the top
cover is still open).
The feeding rollers will start to rotate forward for several
seconds and then back for several seconds.
While the feeding rollers are rotating, wipe them with
cotton pad wet in alcohol-containing cleaner.
Repeat the procedure if necessary.
Fig. 5
Areas indicated by the dotted line require
periodic cleaning
SUPPORT AND WARRANTY
If some problems emerge with the detector, we highly recommend you to apply to
your Supplier.
To avoid any misunderstanding, we earnestly ask you to study properly the terms
and the conditions of the detector operation, its transportation and storage, the
warranty conditions.
All the warranty terms are regulated by the legislation of the country on the territory
of which they were given. However, the DORS reserves the right not to provide the pro-
duct warranty maintenance if the below-mentioned terms are not observed (see p. 17).
The detector may be transported in
the manufacturer's package by car or by
railway (in a covered transport vehicle),
by air - in the pressurized modules at the
temperature of –20°C to +50°C, relative air
humidity up to 98% at +25°C and the air pressure
84 to 107 kPa (630 to 800mm Hg).
Store the detector (in the manufacturer's package)
in a heated and ventilated storage room, at the temperature +5°C to +40°C and a
relative humidity not exceeding 80% at +25°C.
TRANSPORTATION
AND STORAGE
EBKM.00D250.00.00.000-02UM
DORS 210 AUTOMATIC DETECTORDORS 210 AUTOMATIC DETECTOR
WARRANTY TERMS
1. The Manufacturer's warranty period is 12 months since the date of the purchase if
the given terms have not been violated.
2. The Warranty does not apply to the below-mentioned accessories of the detector if
their replacement is envisaged by the detector design and not related to the detector
disassembling:
a. AC cable;
b. USER MANUAL.
3. The Manufacturer does not bear any product warranty obligations in the following
cases:
a. If the detector was not used in compliance with its designated
purpose.
b. In case of violation of the terms and conditions of the detector
operation and installation given in the user manual.
c. If the detector has traces of attempts of unqualified repair.
d. If the defect results from changes in the detector design or in the
circuit that are not envisaged by the Manufacturer.
e. If the defect results from the force majeure circumstances, accidents,
intended or careless acts (failures to act) of the consumer or the third
party.
f. If the detected damages result from getting into the detector of some
foreign objects, substances, liquids, insects.
4. The Warranty does not cover the following faults of the detector:
a. mechanical damages done after the detector was handed over to the
consumer;
b. the damages resulting from non-conformity with the parameter
standards of the power, telecommunication, cable networks and other
similar external factors.
5. The DORS bears no responsibility for a possible direct or indirect damage done by
the DORS products to people, domestic animals and property if this damage results
from nonobservance of the terms and conditions of the detector operation and
installation, intended or careless acts (failures to act) of the consumer or the third party
or the force majeure circumstances.