DREAMS QUEST BED User manual

1 of 3
QUEST BED
Assembly Instructions
NOTE: It will require two people to assemble this bed.Assembly should be carried out in the room that
the bed will be used in.
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the
assembly should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children’s reach.
In the unlikely event that this product has missing or damaged parts, please
call 08442 920000 to obtain spares.
spare
Before you
start, here
is some
helpful advice
Minimum No. of people

recommended to assemble
This product:
Approx assembly time:


2 of 3
Component parts and fittings contained in the box
PARTS
Fittings
A
B
C
D
E
F
G
1 piece
1 piece
1 piece
2 pieces
M8x25mm 8pcs
1/4″x3/4″mm 4pcs
1/4″x7/8″Jcn Nut 4pcs
Washer 8pcs
Spring washer 8pcs
4MM Allen key 2pcs
5MM Allen key 1pc

3 of 3
ASSEMBLY
1) Connect the headboard 1,
footboard 2and side rail 4using the
Washer D, spring washer Eand
bolts A.
1) Connect the bed frame 3and side-
Rail 4using the bolts Band JCN-
Nut C.
STEP 1
STEP 2