DSC Power Series User manual

From
Tyco Security Products
www.dsc.com | 1-888-888-7838
PowerSeries
Security System
Quick Reference Guide
To arm entire system – both interior and perimeter
•Closeallwindowsanddoors(thegreenReadylightwillturnON)
•Pressandhold (Away)for2seconds(thekeypadwillbeeprapidly
 5timesandtheredArmedlightwillturnON)
•Exitpremisesbeforethedelaytimeexpires
To disarm system when you return
•Whenyouenterthroughthedoor,thekeypadwillemitasteadywarningtone
•Enteryour4-digitMasterCodeorUserCode(thearmedlightwillturnOFF)
•Ifyoumakeanerror,pressandenterthe4-digitcodeagain
To arm perimeter of building and still move freely inside
•Pressandhold(Stay)for2seconds
To arm system with door or window open
•Press  whiledisarmed
•TheBypasslightwillash
•Enterthe2-digitzonenumbertobebypassed
•ToexittheBypassfunctionpress
To silence alarm
•Enteryour4-digitMasterCodeorUserCode
When trouble light comes on
•Press
•SomekeypadswilldescribetheTrouble(full-messagekeypads);otherswill
 onlyidentifytheTroublenumber(xed-messageandLEDkeypads)
•IfTroublenumber8islit,thetimeanddateneedstobereset
•ForallotherTroubleconditions,contactyoursecurityprovider
To set time and date
•Press  andenterthe4-digitMasterCode
•1longbeepindicatesanerror,pressandentertheMasterCodeagain
•After4shortbeeps,pressthen10digits,2eachforthehour,minute,
 month,dayandyear(HH:MMMM/DD/YY)
 -Usea24-hourclock(e.g.8:30pm=20:30)
 -Use2digitseachtoindicatethemonthandday(e.g.March8=0308)

Product specifications and availability subject to change without notice. Certain product names mentioned herein
may be trade names and/or registered trademarks of other companies. © 2013 Tyco Security Products.
To add access codes
• Press  andenterthe4-digitMasterCode
•1longbeepindicatesanerror,entertheMasterCodeagain
•3shortbeepsindicatesacknowledgement,entera2digitusernumberto
 beprogrammed.UserCodes01-48areavailableforthePC1616.UserCodes
 01-72areavailableforthePC1832.UserCodes01-95areavailablefor
 thePC1864.
•Enterthe4digitsforthecode
•Enteranother2digitnumbertoprogramanothercodeorpresstoexit
To remove access codes
•Press  andenterthe4-digitMasterCode
• 1longbeepindicatesanerror,entertheMasterCodeagain
•3shortbeepsindicateacknowledgement,enterthe2digitusernumbertobe
 removed.UserCodes01-48areavailableforthePC1616.UserCodes01-72
 areavailableforthePC1832.UserCodes01-95areavailableforthePC1864.
•Entertoremovethecodeandpresstoexit
•Oncethecodehasbeenremoved,presstoexit
To enable door chime feature
•Pressandhold(DoorChime)for2seconds
•3beeps=ON;1longbeep=OFF
Changing keypad buzzer tone
•IfusingaPK5500keypad,press andenterthe4-digit
 MasterCodethenproceedwiththefollowing:
 -Scrolltothephrase“BuzzerControl”andpress
•IfusinganLEDorxed-messagekeypad,press andenterthe
 4-digitMasterCodethenproceedwiththefollowing:
 -Pressandhold(LeftArrow)
 -Thetonewillchange
 -Whenthedesiredtoneisidentied,release(LeftArrow)
To sound an alarm manually
•Pressandhold(Fire)or (Emergency)or (Panic)
 for2seconds
For more information
•Visitwww.dsc.comtodownloadthecompleteusermanual
PN30001348R001
From Tyco Security Products