DURAVIT Luv 700434 Series User manual

Installation instructions Freestanding bathtub
Notice de montage Baignoire autoportante
Instrucciones de montaje y uso Bañera de pie
Cape Cod
#  .. . .. ..
DuraSquare
#  .. . .. ..
Happy D.2 Plus
#  .. . .. ..
Luv
#  .. . .. ..
Vero Air
#  .. . .. ..

257222_MAL_Bathtub freestanding_US/19.07.2

57222_MAL_Bathtub freestanding_US/19.07.2 3
es fr
Información importante 20
Montaje 21
Remarques importantes 12
Montage 13
Important information 4
Installation 5
en

Prior to the installation
Please read the specifications sheets prior to the installation.
Specification sheets are available for download at
www.pro.duravit.us.
Products are in compliance with the following codes:
• Uniform Plumbing Code (UPC®)
• National Plumbing Code of Canada
25
26
About these instructions
The installation instructions come as part of the Duravit
product and must be read carefully prior to installation.
Target readership and qualifications
This is a professional grade product. A working knowledge
of construction techniques and code compliant plumbing
installation are required for proper installation and user
satisfaction. The product must be installed by a licensed
plumber.
Explanation of the key words and symbols
NOTICE Is used to address
practices not related to
physical injury.
Inspection (e.g. for scratches)
Inspect for leaks and that all connections have a
watertight seal
Indication of the length of time (e.g. 10 minutes)
>Action required
Safety instructions
Product and/or property damage
The breach of local and country-specific regulations and
standards can cause damage to the product and/or property
damage.
> Observe the local installation regulations and any
country-specific standards at all times.
Careless handling can result in damage to the surface of
lacquered bathtubs.
> Protect the bathtub from knocks and scratches during
installation and transport.
457222_MAL_Bathtub freestanding_US/19.07.2
en

57222_MAL_Bathtub freestanding_US/19.07.2 5
en
#  .. . .. ..
#  .. . .. ..
#  .. . .. ..
Delivery contents
#  .. . .. ..
#  .. . .. ..

657222_MAL_Bathtub freestanding_US/19.07.2
en
# 791281 (PVC)
# 791282 (ABS)
+Optional accesories (not included)
Freestanding in-floor bathtub drain

⅛"
2 mm
NOTICE
Tilting the bathtub on its side can
damage the bathtub.
> Place cardboard/blanket on
the floor.
> Turn bathtub over.
> Inspect bathtub for any potential
damage that may have occured
during transport.
> Do not install if any damage ist
visable.
> Connect tailpiece to the bathtub
drain.
For Vero Air/Happy D.2 Plus:
> Connect waste and overflow.
> Level the feet before setting
the bathtub.
NOTICE
Suction lifters can cause damage to
the surface of lacquered bathtubs.
> Attach suction lifters to the inside of
laquered bathtubs to avoid damage
to laquered surface.
57222_MAL_Bathtub freestanding_US/19.07.2 7
en
789
654
321

17 ⅜” 443 mm
24 ⅛”
612 mm
2”
52 mm
2”
52 mm
22 ¾”
577 mm 12”
305 mm
19 ⅞”
505 mm
28 ¾”
730 mm
20 ⅛”
513 mm
46 ⅛”/1170 mm
73”/1855 mm
34 ⅞”/885 mm
12 ¼”
310 mm
33 ½”/850 mm
16 ¾” 425 mm
36 ⅜”
925 mm
36 ⅜”
925 mm
72 ⅞”
1850 mm
31 ½”
800 mm
31 ½”
800 mm
4 ⅞”
125 mm
4 ⅞”
125 mm
4 ½”
115 mm
35 ⅜”
900 mm
70 ⅞”
1800 mm
35 ⅜”
900 mm
29 ⅛”
740 mm
29 ⅛”
740 mm
16 ¾”
425 mm
10 ¼” 260 mm
31 ½”/800 mm
15 ¾”
400 mm
15 ¾”
400 mm
35 ⅜”
900 mm
35 ⅜”
900 mm
70 ⅞”
1800 mm
> Observe the dimensions from
diagram 9 to 13 for the positioning
of the drain.
> Position the installation aids
accordingly.
Measurements for Luv.Measurements for DuraSquare.
Measurements for Cape Cod.
Measurements for Vero Air.
> Ensure floor area is clear and level.
> Compensate irregularities by
adjusting tub feet.
857222_MAL_Bathtub freestanding_US/19.07.2
en
121110
987

1800 mm
375 mm
1050 mm
10 ¼“/260 mm
13“/330 mm
8 ¼“
210 mm
31 ½“/800 mm
14 ¾“
70 ⅞“
41 ⅜“
150 mm
5 ⅞”
> Position bathtub.
> Fill the bathtub with water.
> Inspect for potential leaks.
> Make sure to water test fittings.
> Remove installation aids.
> Connect bathtub to drain system.
> Slide straps under the bathtub.
Measurements for Happy D.2 Plus.
NOTICE
> Apply silicone recommended for
acrylic/mineral cast bathtubs only.
> Apply 100% silicone sealant around
the base of the bathtub.
> Leave a small area open.
57222_MAL_Bathtub freestanding_US/19.07.2 9
en
181716
151413

> Let it sit for 24 h before draining.
10 57222_MAL_Bathtub freestanding_US/19.07.2
en
242322
212019