DV8 OFFROAD D-JP-181112-BK User manual

6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
PRODUCT
INSTALLATION MANUAL
M/T SHIFT KNOB
11-18 JEEP WRANGLER JK
D-JP-181112-BK
TOOLS REQUIRED SKILL LEVEL TIME REQUIRED
- 2.5mm Allen Head
Before you install this kit — Read and understand all
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner’s manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
- Novice
- 1 (you)
Little skill level required, you can
easily install it by yourself.
- .5 Hour
Time to install this should only
take about half an hour.
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
855-680-9595
NEED HELP?

INSTALLATION MANUAL
NEED HELP? 855-680-9595
STEP 1 | To remove your shift knob
grab your shift nob and tightly pull and
rotate left to right
Begin by unpacking all items and inspecting
for missing pieces or damage. If you have any
concerns, please contact the company the
product was purchased from. Extra hardware
may be included with the product.

INSTALLATION MANUAL
NEED HELP? 855-680-9595
STEP 2 | Remove the rubber piece
surrounding your new DV8 shift knob to
locate the allen screw.
STEP 3 | Place your shift knob on
shifter and with a 2.5 allen head, tighten
the allen screw securing the shift knob.
Then replace the rubber tread grip.
Congrats! You are nished with the install
of the 11-18 Jeep JK Manual Trans Shift
Knob.