QNF-555
6
Failure to observe the rules for intermittent use (1-minute operation, 10-minute rest) can result in
the overheating protection system installed on the equipment to be activated. If you experience
the equipment stopping during operation due to any of the above reasons, turn it off by pressing
the off button then unplug the equipment from the wall socket and wait 30 minutes. Following
this, continue operating the equipment following the recommendations for the use of this
equipment. If the equipment does not operate even after the 30-minute standstill period, take it
to an authorised service centre for repair.
• Do not lengthen or alter the mains cable of the appliance. If you need a longer cable between
the appliance and the wall socket, you should buy a standard extension cord from an electrical
dealer. When using an extension cord, be careful not to create a hazard that you or someone else
could trip over.
• Warning! Disassembling the appliance, opening the casing or attempting to repair it at home
are forbidden - non compliance with this instruction might result in serious accidents. The inside
of the appliance does not contain any parts that can be repaired at home or used for any other
purpose. Never use the appliance with damaged power cable or connector, if operation is erratic
or if it was dropped and is otherwise damaged. If the appliance has become faulty for any reason
or moisture has got inside the casing, take it to an authorised service engineer for checking or
repair. Only skilled experts are authorised to repair the appliance. The manufacturer is not liable
for damages if home repair has been attempted or the instructions in the operating manual
have not been complied with.
Dear Customer,
All electrical and mechanical equipment needs to be cared for appropriately. It’s important to
note that using or storing the appliance in certain conditions may adversely affect its lifespan and
functionality. Always protect the appliance from the conditions listed below.
Using or storing the appliance in a wet, humid or damp environment can cause:
- deterioration and premature aging of the cover and electric insulation of the appliance,
- premature wearing and aging of the plastic and rubber components,
- rust and corrosion affecting electrical components and metal parts.
Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated
with vapours from cooking oil or grease) can cause:
- greasy dust coatings on the mechanical and electrical elements and the casing of the appliance,
which could result in electrical contact failure or even complete breakdown, and could also
damage the plastic and rubber elements.
The effects of direct sunlight on the appliance can include:
- accelerated deterioration of the appliance casing and its plastic and rubber components,
damage to strength and other structural features. The appliance’s surface may become porous
and fragile, which may result in a safety risk.
User's Manual for QNF-555.indd 6User's Manual for QNF-555.indd 6 2012.10.17. 18:37:512012.10.17. 18:37:51
