Eaton SQG3 Series Instruction manual

DoP0018
3. Connection details
1. Mounting base 2. Sounder/beacon assembly
Table 1. Specification
Supply voltage (conventional) 18~35 Vdc
Cable size/type
0.5~2.5mm2/FIRETUF, FP200 or MICC
Current (high volume) 11mA
Current (low volume) 8.7mA
Sound output (high volume)* 90 +/- 3dB(A) : All tones
Sound output (low volume)* 80 +/- 3dB(A) : All tones
Operating temperature -10 to +55ºC ( 93% ± 3%RH )
Material ABS FR plastic
Environmental category Type A= IP21C
Tones 3, see section 4.
Flash rate 0.5Hz
Feature Value Feature Value
SQG3-23 Base sounder VAD
Comp liance EN54-3; EN54-23:2 010
14
OUT IN
SCREEN ZONE OUT ZONE IN
+VE -VE +VE -VE
ZONE OUT
ZONE IN
Note
Screen must be continuous
along entire length of line.
50
60
70
80
(i) Knockout the required
fixing holes.
(ii) Fix to mounting surface
using two suitable screws.
(iii) Please ensure all cable
entry points are sealed
appropriately.
If the base deforms on an
uneven surface, loosen the
screws or move to a flatter
position.
Flash on period 60ms
Note
Technical data Effective July 2019 SQG3-23 25-12947-E

7. Dimensions6. Fitting detector
5. VAD coverage area
4. Switch position meaning
Technical data
Effective July 2019
1, Sounder on/off (AV version only)
2, Volume high (off)/low (on)
3, Tones
4, Tones
5, Mode: On = N/A* Off = Conventional
*Switch 5 must be set to ‘Off’ in order to operate
Continuous: 3=On, 4=On (910Hz)
Bell: 3=On, 4=Off (1440 Hz)
Alternating: 3=Off, 4=On (610/910 Hz)
{
30mm
Ø114mm
1 2 3 4 5
1
On
Off
Ceiling mounted
3D view
Cross section
plane
Product
SQG3-23
0.45
0.80
0.90
1.70
1.40
0.90
(i) Use M4 screw to attach
the detector to the sounder.
Note
Length to be determined by installer.
Base shown for illustration purposes only.
Cross section
view (metres)
Manufactured By
Eaton Electrical Products Ltd
Llantarnam Park, Cwmbran, Gwent, NP44 3AW, UK
Tel: [phone]
Fax:[phone]
www.eaton.com
Made in the UK
Eaton Industries Manufacturing GmbH
Electrical Sector EMEA
Route de la Longeraie 7
1110 Morges, Switzerland
Eaton.eu
2019 Eaton All rights reserved July 2019
©
Notes.
The devices have no serviceable component so no maintenance
is required.
*For full tone and polar node SPL data please refer to M14-003.