A new best friend!
Lights, sounds and songs play while Cool Beats Penguin’s head
moves side to side. Just activate your capability switches to get
the fun started. 85 songs, and phrases help introduce counting
and colors. Size: 6"L x 5"W x 9"H. Requires 4 AA Batteries.
Weight: ½ lbs.
Operation:
. Cool Beats Penguin requires 4 AA batteries. Use alkaline
batteries only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform
properly. Never mix old and new batteries together or different
brands or types of batteries together.
2. The battery compartments are located under the toy’s feet.
Carefully remove the screws from the covers using a Phillips
head screwdriver, and lift the cover off. Observing proper (+)
& (-) battery polarity, install 4 AA size batteries into the
holders. Replace the covers and screws. Next set the
ON/OFF/VOLUME switch to Low or High.
3. Cool Beats Penguin has two external switch input cord jacks
so you can use your own capability switches if needed. To
use an external switch, plug your switch into the desired jack
on either side of Cool Beats Penguin. Make sure your switch
is plugged in all the way. There should be no gaps. Activating
your switch will replicate the corresponding built in button on
the front of Cool Beats Penguin.
4. Just activate your capability switches or the two buttons on
the front of Cool Beats Penguin to get the fun started. Lights,
sounds and songs play while Cool Beats Penguin’s head
moves from side to side. Songs and phrases help introduce
counting and colors.
For more detailed information on all Cool Beats Penguin,
features and functions please read the original manufactures
user’s guide.
Troubleshooting:
Problem: Cool Beats Penguin does not work.
Action #1: Rotate (spin) the batteries within the battery
compartment to ensure a good connection. Check that all
batteries are installed properly.
Action #2: Check all batteries for freshness, if weak or dead
replace with new batteries. Use an alkaline battery (E.G. Duracell
or Energizer brand).
Problem: Cool Beats Penguin does not work with a switch.
Action: Try a different switch with Cool Beats Penguin to rule out
that Cool Beats Penguin is the source of the problem.
Care of the Unit:
Cool Beats Penguin can be wiped clean with any mild household
multi-purpose, non-abrasive cleaner and disinfectant. We
recommend Simple Green, which is a non toxic biodegradable
all-purpose cleaner.
Do not use abrasive cleaners, as they will scratch the
surface of the unit.
Do not submerge the unit, as it will damage the electrical
components.
Rev 4/8/2022
