Who doesn’t love a llama, especially when it’s a unicorn, too!
Lovely Llamacorn’s horn glows and it plays a charming tune that
evokes a fantasy world when activated. Works with or without an
adapted switch. It’s soft and cuddly, too, just like a Llamacorn
should be. Requires 3 AAA batteries. Weight: lb.
Operation:
. Lovely Llamacorn requires 3 AAA batteries. Use alkaline
batteries only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform
properly. Never mix old and new batteries together or different
brands or types together.
2. Turn Lovely Llamacorn over and open up the Velcro
enclosure, then using a Phillips head screwdriver remove the
screw and lift the battery cover off. Observing proper (+) & (-)
battery polarity, install 3 AAA size batteries into the holder.
Replace the battery compartment cover and screw.
3. Set the ON/OFF switch to the ON position. Please Note:
Lovely Llamacorn will work through the use of an external
switch or the built in musical note button on his side.
4. Connect Lovely Llamacorn to any external capability switch
via the cord input jack. Make sure your switch is plugged in all
the way, there should be no gaps. Press and release your
capability switch and Lovely Llamacorn’s horn glows and it
plays a magical sound effect (approximately 0 seconds).
Press your switch again and she will play a charming tune that
evokes a fantasy world when activated (approximately 30
seconds).. Works with or without an adapted switch. It’s soft
and cuddly, too, just like a Llamacorn should be. If you press
your switch while she is playing, Lovely Llamacorn will stop.
Pressing and releasing your switch again will start the magical
sound effect or song from the beginning, depending on when
you stopped her.
5. Turn OFF Lovely Llamacorn when finished using to prevent
false activation and battery drain.
Troubleshooting:
Problem: Lovely Llamacorn does not work.
Action #1: Rotate (spin) the batteries within the battery
compartment to ensure a good connection. Check that all
batteries are installed properly.
Action #2: Check all batteries for freshness, if weak or dead
replace with new batteries. Use an alkaline battery (E.G. Duracell
or Energizer brand).
Action #3: Make sure that you have plugged your switch in all
the way. There should be no gaps.
Action #4: Try your external capability switches with another
device to rule out the switches as the source of the problem.
Care of the Unit:
If you will not be using Lovely Llamacorn for an extended amount
of time, we recommend removing the batteries.
o not submerge the unit in water, as it will damage the
electrical components. Lovely Llamacorn is surface washable
only.
Rev 10/20/20
