fantastic furniture Avenue User manual

Version 1.0
Avenue
Bar Stool 1 Str
fantasticfurniture.com.au
APPROVED LP 18/10/21

Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Page 2
fantasticfurniture.com.au
Caution:
Do not stand on, or use this chair as a step ladder.
Use this product for seating one person at a time.
This product should be checked perioically to ensure
all components are secure and all hardware is tight.
Recommended weight capacity: 120kg

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

:
What you need
to assemble the product
Parts list
1 x Back Frame ( P1 )
1 x Seat ( P2 )
2 x Front Legs ( P3 )
2 x Side Rails ( P4 )
1 x Front Rail ( P5 )
1 x Back Frame 1 x Seat
( P3 ) ( P4 ) ( P5 )
( P1 ) ( P2 )
2 x Front Legs 2 x Side Rails 1 x Front Rail
Hardware pack
9 x Bolts
( H1 )
6 x Screws
( H2 )
9 x Washers
( H3 )
Allen key
( H4 )
Note Hardware pack inside of seat
Please make sure you have all these parts before you start.
Page 4
fantasticfurniture.com.au

Step 1
2 x Screws
( H2 )
Allen key
( H4 )
( H2 )
( P3 )
( P5 )
Insert 1 x front rail ( P5 ) into the corresponding holes on the 2 x front legs ( P3 ).Secure together
using 2 x screws ( H2 ),tightening with allen key ( H4 ).
Do not fully tighten screws. Leave them a little loose at this stage.
Step 2
You will need
You will need
4 x Bolts
( H1 )
4 x Washers
( H3 )
Allen key
( H4 )
( P2 )
( H3 ) ( H1 )
Page 5
fantasticfurniture.com.au
Note :we strongly recommend assembling the stool on
a soft surface to minimise the risk of damaging the chair.
Do not fully tighten bolts. Leave them a little loose at this stage.
Attach the assembled leg frame to the seat ( P2 ) as shown. Secure together using 4 x
bolts ( H1 ) and 4 x washers ( H3 ),tightening with the allen key ( H4 ).

Into corner
Step 3
2 x Screws
( H2 )
Allen key
( H4 )
You will need
( H2 )
( P1 )
( P4 )
Do not fully tighten screws. Leave them a little loose at this stage.
Insert 2 x side rails ( P4 ) into the corresponding holes in the back frame ( P1 ) as shown. Secure
together using 2 x screws ( H2 ),tightening using the allen key ( H4 ).
Step 4
You will need
5 x Bolts
( H1 )
5 x Washers
( H3 )
Allen key
( H4 )
( H1 )
( H3 )
Page 6
fantasticfurniture.com.au
Do not fully tighten bolts. Leave them a little loose at this stage.
Attach the assembled seat frame ( P1,P3,P5 ) to the back frame ( P1 ) and side rails ( P4 )
as shown. Secure together using 5 x bolts ( H1 ) and 5 x washers ( H3 ).

Page 7
fantasticfurniture.com.au
Step 5
2 x Screws
( H2 )
Allen key
( H4 )
You will need
( H2 )
Attach the 2 x side rails ( P4 ) to the 2 x front legs ( P3 0 as shown.Secure together using 2 x
screws ( H2 ),completely tightening using allen key ( H4 ).
Step 6
You will need
Allen key
( H4 )
Carefully turn the chair upright.
Apply downward pressure onto the seat ( P2 ) to ensure the chair is level before
completely tightening all bolts and screws using the allen key ( H4 ).

Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
Page 8
fantasticfurniture.com.au
Step 7