fantastic furniture Amirah Bedside User manual

fantasticfurniture.com.au
Amirah
Bedside
Version 1.2

Page 2
fantasticfurniture.com.au
We're thrilled you've chosen Fantastic Furniture
to help create a home you'll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
WARNING: WEIGHT LIMIT ON TOP IS 40KG.
WARNING: WEIGHT PLACE IN DRAWER NOT
TO EXCEED 10KG.
!
Looks like you've found
your Fantastic!
WARNING: ENSURE THE WALL STRAP IS
ATTACHED TO AVOID SERIOUS INJURY
To avoid the risks of injury, this product has been provided with wall
straps to prevent toppling. We strong recommend that this product
is permanently fixed to the wall or other suitable surface. Fixing
devices are not included since different surface materials require
different attachments. Please seek professional advice if you are in
doubt of what fixing device to use.
!

Useful information
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
fantasticfurniture.com.au Page 3
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most commom mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or
website for product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Assembly checklist

What you need
to assemble the product
Other tools you need
Phillips head screwdriver, soft headed
mallet.
Parts list
Box 1:
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Back Support Panel (P4);
Plinth Panel (P5);
2 x Drawer Back Panel (P6);
2 x Drawer Left Panel (P7);
2 x Drawer Right Panel (P8);
2 x Drawer Front Panel (P9);
2 x Drawer Bottom Panel (P10);
Back Panel (P11);
Hardware.
8 x CSK Screws
38mm
(H4)
12 x Cam Nuts
12mm (H2)
12 x Wood Dowels
(H3)
24 x CSK Screws
12mm
(H5)
2 x T/MS Screws
(H6)
Page 4
fantasticfurniture.com.au
2 x Rhinestone
Handles (H7)
Top Panel
(P1)
Left Side
Panel
(P2)
Right Side
Panel
(P3)
Back
Support Panel
(P4)
Plinth
Panel
(P5)
Drawer
Back Panel
(P6)
Drawer
Left Panel
(P7)
Drawer
Front Panel
(P9)
Drawer
Bottom Panel
(P10)
Drawer
Right Panel
(P8)
Back
Panel
(P11)
Hardware pack
12 x Cam Bolts
(H1)
2 x Drawer
Runner L 14"
(H8)
2 x Drawer
Runner R 14"
(H9)
2 x Runner
Track L 14"
(H11)
2 x Wall Fixing Strap
(H12)
2 x Washers
(H13)
2 x CSK Screws
16mm
(H14)
2 x Runner
Track R 14"
(H10)

You will need
Insert 8 x cam nuts (H2) into panels (P4), (P5), (P7) & (P8) using a phillips head
screwdriver. Rotate the cam nuts (H2) so the arrow points towards the incoming
bolts.
Insert 8 x dowels (H3) into panels (P4), (P5), (P7) & (P8) by hand or gently using
a soft headed mallet.
8 x Wood Dowels
(H3)
Page 5
fantasticfurniture.com.au
H2
8 x Cam Nuts
12mm (H2)
Phillips Head
Screwdriver
Soft Headed
Mallet
H2
P8
P8
P7
P7
P4
H2
H2
H2
H2
H2 H2
H2
P5
H3
H3
H3
H3
H3
H3
H3
H3
Step 1
H2
H3

Insert 4 x cam nuts (H2) into panels (P2) & (P3). Rotate the cam nuts (H2) so the arrows
point towards the incoming bolts.
Insert 4 x dowels (H3) into panels (P2) & (P3), by hand or gently using a soft headed mallet.
Screw 4 x cam bolts (H1) into panels (P2) & (P3) using a phillips head screwdriver.
Screw 8 x cam bolts (H1) into panels (P1) & (P9) using a phillips
head screwdriver.
You will need
Page 6
fantasticfurniture.com.au
P3
P2
H2
4 x Cam Bolts
(H1)
4 x Wood Dowels
(H3)
4 x Cam Nuts
12mm (H2)
Phillips Head
Screwdriver
Soft Headed
Mallet
8 x Cam Bolts
(H1)
You will need
Phillips Head
Screwdriver
Step 3
H1
H1
H1
H1
H2
H2
H2
H2
H3
H3
H3
H3
H3
H1
H1
P1
P9
P9
H1
Step 2
H1
H1
H1
H1
H1
H1
H2
H1

To attach panels (P7) & (P8) to panel (P6), insert 4 x CSK screws (H4) and tighten with
a phillips head screwdriver.
Slide in the drawer bottom panel (P10) into the grooves of panels (P7, P8 & P6) with the
laminated side facing up.
Attach the panel (P9) to panel (P7 & P8) and ensure the drawer bottom panel (P10) slides
into the groove.
Turn the cam nuts on panel (P7 & P8) clockwise with a phillips head screwdriver.
Attach the handle (H7) to panel (P9) with 1 x T/MS screw (H6) using a phillips head
screwdriver.
Repeat this process for the remaining drawer.
8 x CSK Screws
38mm (H4)
Step 4
You will need
Page 7
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Repeat x 2
Phillips Head
Screwdriver
2 x T/MS Screws
(H6)
2 x Rhinestone
Handles (H7)
H4
H4
H6
H7
P8
P7
P6
P6
P8
P7
P9
P10
Lock
H1
H2 H2
Unlock
Laminated Side

Attach the drawer L (H8) and the drawer runner R (H9) to the underside of the drawer
with 6 x CSK screws (H5) using a phillips head screwdriver.
Repeat this process for the other drawer.
Page 8
fantasticfurniture.com.au
Step 6
12 x CSK Screws
12mm(H5)
You will need
Phillips Head
Screwdriver
12 x CSK Screws
12mm(H5)
You will need
2 x Runner Track
R 14" (H10)
Attach 2 x panel runners L (H11) to the left side panel (P2) with 6 x CSK screws using a
phillips head screwdriver.
Attach 2 x panel runners R (H10) to the right panel (P3) with 6 x CSK screws using a
phillips head screwdriver.
Repeat x 2
P3
P2
Step 5
Phillips Head
Screwdriver
2 x Drawer
Runner L 14" (H8)
2 x Drawer
Runner R 14" (H9)
2 x Runner Track
L 14" (H11)
H11
H11
H10
H10
H8
H9
P6
P8
P8
P10
P10
H9
H5
H5
H5
H10
H5
H5
H11

Lock
H1
H2
H2
Unlock
Attach panels (P4) & (P5) to panels (P2) & (P3).
Turn the cam nuts on (P4) & (P5) clockwise with a phillips head screwdriver to lock in
position.
Step 7
Page 9
fantasticfurniture.com.au
Step 8
You will need
Phillips Head
Screwdriver
Slide panel (P11) into the groove in panels (P2) & (P3).
P5
P4
P3
P2
P11
P3
P2
Laminated Side
Warning Label at the
back and top of the
unit

To attach panel (P1) to panels (P2 & P3), align the dowels (H3) and cam bolts (H2) to the
holes and make sure the back panel (P11) slides into the groove. Turn the cam nuts on
panels (P2 & P3) clockwise with a phillips head screwdriver to lock in position.
Step 9
Page 10
fantasticfurniture.com.au
You will need
Phillips Head
Screwdriver
P2
P3
P1
Lock
H1
H2
H2
Unlock
Step 10
Put the drawers into the frame one at a time.
P11

Job Complete!
In the interest of our environment please dispose of all packaging
thoughtfully.
Page 11
fantasticfurniture.com.au
We strongly advise that
you use the wall safety
strap provided to prevent
the unit toppling over.
Attach wall fixing strap to panel (P1) with 2 x CSK screws (H14) and 2 x washers (H13) using
a phillips head screwdriver. There are pre-drilled holes on the bottom of panel (P1) to
insert the screws.
Move the bedside to the final position. Attach the safety strap to the wall.
Make sure it is firmly attached and make sure it is snug fit.
The screws and wall plugs are not provided. Please use appropriate fixtures for your
wall.
Seek advice from a qualified trades person on how to attach this safety
strap to your specific wall.
2 x Wall Fixing
Strap (H12)
2 x CSK Screws
16mm (H14)
You will need
2 x Washers
(H13)
Phillips Head
Screwdriver
Step 11
P2
P3
H12
H12
H12 H13
H14
P1
P1
Pre-drilled
Hole