fantastic furniture Hamilton Bed Queen User manual

Version 1.1
Hamilton
Bed Queen
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Headboard (P1);
Footboard (P2);
2 x Side Rails (P3);
Centre Rail (P4);
3 x Support Legs (P5);
11 x Slats (P6);
2 x Support Slats (P7):
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Page 4
DO NOT USE
fantasticfurniture.com.au
Side Rail
(P3)
Side Rail
(P3)
Support Slats
(P7) Slats
(P6)
Headboard
(P1)
Footboard
(P2)
Centre Rail
(P4)
Support
Leg
(P5) Support
Leg
(P5)
Support
Leg
(P5)
2 x Hexagonal
Nuts
(H4)
5 x Washers
(H6)
1 x Large
Allen Key
(H10)
5 x Long Bolts
(H3)
3 x Adjusters
(H5)
16 x Screws
(H11)
4 x Elbow
Connectors
(H8)
4 x Flat
Connectors
(H9)
12 x Bolts
(H7)
1 x Spanner
(H12)
1 x Allen Key
(H13)
3 x Spring
Washers
(H14)
42 x Screws
(H2)
4 x Bolts
(H1)

You will need
Step 1
Step 2
You will need
Attach 2 x flat connectors (H9) to footboard (P2) with 8 x screws (H2), tightening with
a phillips head screwdriver.
(P1)
(P2)
Phillips Head
Screwdriver
fantasticfurniture.com.au Page 5
Attach 2 x flat connectors (H9) to headboard (P1) using 8 x screws (H2), tightening with
a phillips head screwdriver.
8 x Screws
(H2)
2 x Flat
Connectors (H9) H2
H2
H9
H9
H2
H9
H2
H9
Phillips Head
Screwdriver
8 x Screws
(H2)
2 x Flat
Connectors (H9)
H2
H9
H2
H9
Important Note: The screws (H2)
must be inserted through
the flat side of the flat
connectors (H9) as shown.
Important Note: The screws (H2)
must be inserted through
the flat side of the flat
connectors (H9) as shown.
H2
30mm

(P3)
(P3)
(P3)
x2
You will need
Step 3
(P2)
Attach 4 x elbow connectors (H8) to the ends of the 2 x side panels (P3) with 16 x screws (H11),
tightening with a phillips head screwdriver.
You will need
Step 4
With assistance, attach the 2 x side panels (P3) to footboard (P2) with 6 x bolts (H7),
tightening with the large allen key (H10).
Phillips Head
Screwdriver
fantasticfurniture.com.au Page 6
Required
Two People
H11
H8
H10
H7
16 x Screws
(H11)
4 x Elbow
Connectors (H8)
H11
H8
1 x Large
Allen Key (H10)
6 x Bolts
(H7)
25mm
H11

(P3)
(P3)
(P1)
(P5)
(P5)
(P5)
(P4)
fantasticfurniture.com.au Page 7
Required
Two People
You will need
Step 5
With assistance, attach the 2 x side panels (P3) to headboard (P1) using 6 x bolts (H7), tightening
with the large allen key (H10).
You will need
Step 6
1 x Large
Allen Key (H10)
6 x Bolts
(H7)
H10
H7
3 x Adjusters
(H5)
3 x Washers
(H6)
H5
H5
H5
H6
H6
H6
3 x Spring
Washers (H14)
1 x Allen Key
(H13)
3 x Long Bolts
(H3)
H3
H14
H3
H14
H3
H14
H13
Attach 3 x support legs (P5) to centre rail (P4) using 3 x washers (H6), 3 x spring
washers (H14) and 3 x long bolts (H3), tightening with the allen key (H13). Attach
the 3 x adjusters (H5) to the 3 x support legs (P5) by turning clockwise.

(P4)
You will need
Step 7
fantasticfurniture.com.au Page 8
4 x Bolts
(H1)
(P1)
(P2)
(P2)
(P1)
H1
H1
You will need
Step 8
4 x Screws
(H2)
Phillips Head
Screwdriver
H6
H4
2 x Hexagonal
Nuts (H4)
Attach the 2 x support slats (P7) to centre rail (P4) using 2 x long bolts (H3), 2 x washers (H6)
and 2 x hexagonal nuts (H4), tightening with the spanner (H12) and allen key (H13).
Attach the 2 x support slats (P7) to the 2 x side rails (P3) using 4 x screws (H2), tightening
with a phillips head screwdriver. Ensure the 3 x adjusters (H5) in the 3 x support legs (P5)
are retracted so they are not touching the floor. With assistance, move the bed into
its final position. Once the bed is in its final position, extend the 3 x adjusters (H5) in
the 3 x support legs (P5) so they are sitting firmly on the floor.
Attach centre rail (P4) to headboard (P1) and
footboard (P2) using 4 x bolts (H1), tightening
with the allen key (H13).
2 x Washers
(H6)
H3
2 x Long Bolts
(H3)
(P4)
(P7)
(P7)
(P3)
(P3)
H2
H2
H2
H12
H2
H3
H6
H4
H4
H3
H6
1 x Spanner
(H12)
H13
1 x Allen Key
(H13)
H13
Required
Two People
1 x Allen Key
(H13)

You will need
Step 9
fantasticfurniture.com.au Page 9
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
(P3)
(P3)
Attach the 11 x slats (P6) to the 2 x side rails (P3) using 22 x screws (H2), tightening with a
phillips head screwdriver.
Phillips Head
Screwdriver
22 x Screws
(H2)
H2
H2