fantastic furniture Park User manual

Version 1.0
Park
Console Table
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
Recommended weight capacity : 10kg

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Page 4fantasticfurniture.com.au
Hardware pack

Page 5
Step 1
fantasticfurniture.com.au
Align the holes on the table top (P1) with the holes on side frame (P2) as shown.
Secure together using 2 x long bolts (H1), tightening using allen key (H3).
Important Note: We strongly recommend assembling the table on a soft surface to reduce
the risk of damaging the table top.

Page 6
Step 2
fantasticfurniture.com.au
Align the holes on the table top (P1) with the holes on the 2 x tubes (P4).
Attach together using 4 x short bolts (H2), tightening using the allen key (H3).

Page 7
Step 3
fantasticfurniture.com.au
Align the holes on the bottom frame (P3) with the holes on the side frame (P2) as shown.
Ensure the holes in the middle of the bottom frame (P3) also align with the 2 x tubes (P4).
Secure the side frame (P2) and bottom frame (P3) together using 2 x long bolts (H1),
tightening with allen key (H3).

Page 8
Step 4
fantasticfurniture.com.au
Ensure the holes on the bottom frame (P3) and 2 x tubes (P4) are aligned.
Secure together using 2 x long bolts (H1), tightening with allen key (H3).
Carefully turn the table upright.

Page 9
Step 5
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
fantasticfurniture.com.au