fantastic furniture HAYMAN User manual

Assembly Instructions
Bed Queen
VER 1.1
HAYMAN

Page 3
What you Need
To Assemble the Body
Bedhead
(P1)
Bedfoot
(P3)
Supporter
(P6)
Supporter
(P7)
Side Rail
(P2)
(Tools not provided)
Phillips Head Screwdriver
Please make sure you have all these parts before you start.
Side Rail
(P2)
Central Rail
(P4)
Support
Leg
(P5) Support
Leg
(P5)
Support Rail
(P8)
Support
Leg
(P5)
3 x Long Bolts
(H11)
6 x Long Screws
(Ø4 x 35)
(H10)
4 x Small Screws
(Ø4 x 20)
(H5)
4 x Inside
Hexagonal Screws
(H9)
1 x Allen Key
(Medium)
(H6)
1 x Allen Key
(Large)
(H12)
8 x Inside
Hexagonal Bolts
(H1)
8 x Hexagonal
Nuts
(H4)
1 x Spanner
(H7)
8 x Hole Stickers
(H8)
8 x Half Round
Nuts
(H2)
4 x Washers
(H3)
28 x End Connectors 14 x Centre Connectors 28 x Fantastic Furniture
ComfortSlats Queen
TM

Page 4
Step 2
You will need:
Attach Supporter (P7) to Bedhead (P1) with 3 x Long Screws (H10).
3 x Long
Screws
(H10)
Step 1
You will need:
(P5)
H11
H6
H11
H11
(P5)
(P5)
(P4)
Attach 3 x Support Legs (P5) to Central Rail (P4)
with 3 x Long Bolts (H11) using Allen Key (H6).
(P1)
3 x Long Bolts
(H11)
1 x Allen Key
(Medium)
(H6)
H10
H10
H10
(P7)
Make sure the side with smaller holes of the
supporter (P7) is facing the Bedhead (P1).

Page 5
Step 4
(P1)
(P2)
(P2)
Step 3
You will need:
3 x Long
Screws
(H10)
(P3)
Attach Supporter (P6) to Bedfoot (P3) with 3 x Long Screws (H10).
Push 4 x Inside Hexagonal Bolts (H1) through Bedhead (P1) and attach with
Side Rails (P2) with 4 x Half Round Nuts (H2), and 4 x Hexagonal Nuts (H4)
using Spanner (H7). Tigheten with Allen Key (H12).
NOTE: HOLES
POSITIONED
ON TOP
You will need:
4 x Inside
Hexagonal
Bolts
(H1)
4 x Half Round
Nuts
(H2)
4 x Hexagonal
Nuts
(H4)
1 x Allen Key
(Large)
(H12)
1 x Spanner
(H7)
H1
H12
H1
H1
H1
H2
H7
H4
H10
H10
H10
(P6)
Make sure the side with smaller holes of the
supporter (P6) is facing the Bedfoot (P3).

Page 6
Step 5
(P1)
(P3)
(P8)
(P8)
Step 6
You will need:
4 x Small
Screws
(H5)
H5
H5
H5 H5
H5 H5
8 x Hole
Stickers
(H8)
H8
H8
H8
H8
H8
H8
H8
H8
You will need:
(P3)
(P2)
(P2)
Push 4 x Inside Hexagonal Bolts (H1) through Bedfoot (P3) and attach with Side Rails (P2) with
4 x Half Round Nuts (H2), and 4 x Hexagonal Nuts (H4) using Spanner (H7). Tigheten with Allen Key (H12).
4 x Inside
Hexagonal
Bolts
(H1)
4 x Hexagonal
Nuts
(H4)
1 x Allen Key
(Large)
(H12)
H1
H12
H1
H1
H1
4 x Half Round
Nuts
(H2)
1 x Spanner
(H7)
H2
H7
H4
Attach Support Rail (P8) to Side Rails (P2) as shown. Then screw Support Rail (P8) with
4 x Small Screws (H5). You can leave the holes on the bedhead and bedfoot visible,
or attach 8 x Hole Stickers (H8) to the holes of Bedhead (P1) and Bedfoot (P3).

Page 7
Step 7
(P4)
Put Central Rail (P4) into the right place as shown.
Attach Central Rail (P4) to Bedhead (P1) and Bedfoot (P3) with
4 x Inside Hexagonal Screws (H9) and 4 x Washers (H4) using Allen Key (H6).
The side with the mark
should face to Bedhead (P1)
You will need:
H9 H3
H3
H9
1 x Allen Key
(Medium)
(H6)
4 x Inside
Hexagonal
Screws
(H9)
B.H.
B.H.
B.H.
4 x Washers
(H3)
Push 2 End Connectors, 2 Fantastic Furniture ComfortSlats Queen
and a Centre Connector together.
Insert the full slat into the side rail and centre rail one by one.
HOW TO FIT YOUR COMFORT SLATS
Step 8
You will need:
28 x End
Connectors
14 x Centre
Connectors
1
2
28 x Fantastic
Furniture
ComfortSlats
Queen
TM
TM

Page 8
The job is now complete!
In the interest of our environment
Please dispose of all packaging thoughtfully.
Sometimes it makes it easier to line up the hole
if you press down in the middle of the slat to flatten it out.
Repeat for every bed slat until finished.
3
4