fantastic furniture Hamilton Hall Table User manual

Version 1.0
Hamilton
Hall Table
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 20kgs /Shelf.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
2 x Side Panels (P2);
Shelf Panel (P3);
4 x Rails (P4);
Shelf Panel (P5)；
Rail (P6)
Hardware pack
Top Panel
(P1)
Shelf Panel
(P3)
Shelf Panel
(P5)
Side Panel
(P2)
Side Panel
(P2)
Rail
(P4) Rail
(P4)
Rail
(P4) Rail
(P4)
Rail
(P6)
1 x Safety
Strap
(H5)
1 x Washer
(H6)
4 x Cam
Bolts
(H7)
4 x Cam
Nuts
(H8)
12 x Nuts
(H3)
16 x Long
Screws
(H4)
8 x Dowels
(H1)
12 x Bolts
(H2)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE

(P4)
(P4)
(P3)
You will need
Step 1
Phillips Head
Screwdriver
Attach Rails (P4x2) to Bottom Panel (P3) with 6 x Long Screws (H4) by tightening with the
Phillips Head Screwdriver.
Attach Rail (P6) to Shelf Panel (P5) with 4 x Long Screws (H4) by tightening with the Phillips
Head Screwdriver.
fantasticfurniture.com.au Page 5
H4
H4
H4
H4
H4
H4
H4
6 x Long
Screws (H4)
You will need
Step 2
Phillips Head
Screwdriver
4 x Long
Screws (H4)
Countersink
face upwards
(P6)
(P5)
H4
H4
H4
H4
Countersink
face upwards

You will need
Step 4
Insert 4 x Dowels (H1)
into Shelf Panels (P3&P5).
Push 6 x Bolts (H2) through Side
Panel (P2) and insert 6 x Nuts (H3)
into Rails & Shelf Panel (P4x4&P5).
Rotate the nuts so the opening
point towards the incoming bolts.
Attach Rails & Shelf Panel (P4x4&P5) to Side Panel (P2) by tightening all nuts
with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
(P4)
(P4)
(P4)
(P4)
(P4)
(P3)
(P5)
(P6)
(P2)
Step 3
You will need
Phillips Head
Screwdriver
Insert 4 x Dowels (H1) into Shelf Panels (P3&P5). Push 6 x Bolts (H2) through Side
Panel (P2) and insert 6 x Nuts (H3) into Rails & Shelf Panel (P4x4&P5). Rotate the
nuts so the opening point towards the incoming bolts. Attach Rails & Shelf Panel
(P4x4&P5) to Side Panel (P2) by tightening all nuts with the Phillips Head Screwdriver.
H2
H2
H2
H2
H2
H2
H2
Ĝ
h
6 x Nuts
(H3)
6 x Bolts
(H2)
H3
H3
H3
H3
H3 H3
countersink hole
on outside
(P4)
(P4)
(P4)
(P5)
(P2)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
6 x Nuts
(H3)
6 x Bolts
(H2)
H3
H3
H2
H2
H2
H2
H3
H3
4 x Dowels
(H1)
H1
H1
H1
4 x Dowels
(H1)
Countersink
face bottom

Step 5
You will need
Attach 4 x Cam Bolts (H7) to Top Panel (P1) by tightening with the Phillips Head
Screwdriver.
Phillips Head
Screwdriver
4 x Cam Bolts
(H7)
H8
H8
1 x Safety Strap
(H5)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 7
Step 6
You will need
Insert 4 x Cam Nuts (H8) into Side Panels
(P2x2) as shown. Rotate the cam nuts so
the arrow points towards the incoming cam
bolts. Attach 1 x Safety Strap (H5) between Top Panel (P1) and Rail (P4) as shown. Attach
Rails (P4x2) and Side Panels (P2x2) to Top Panel (P1) with 6 x Long Screws (H4) by tightening
with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Cam Nuts
(H8)
(P4)
(P2)
(P2)
(P4)
(P1)
6 x Long
Screws (H4)
H4
H4
H4
H5
(P1)
H7
H7
H7
H7
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

Move the hall table to the final position, and attach the safety strap to the wall
securely. Make sure it is firmly attached and snug fit.
fantasticfurniture.com.au
fantasticfurniture.com.au Page 8
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
H6
wall
Screw
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
You will need
Step 7
Phillips Head
Screwdriver
1 x Washer
(H6)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.