fantastic furniture Cove User manual

Cove
Bedside 1 Drawer
fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 15kg/Drawer.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2);
Left Side Panel (P3);
Right Side Panel (P4);
Back Panel (P5);
4 x Legs (P6);
Drawer Front (P7);
Left Drawer Side (P8);
Right Drawer Side (P9);
Drawer Back (P10)
Drawer Base (P11)
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
DO NOT USE
fantasticfurniture.com.au
Top Panel
(P1)
Left Side
Panel (P3)
Right Side
Panel (P4)
Bottom Panel
(P2)
Back
Panel (P5)
Leg
(P6) x4
Left Drawer
Side (P8)
Right Drawer
Side (P9)
Drawer Back
(P10)
Drawer
Base
(P11)
Drawer Front
(P7)
1 x Screw
(H15)
1 x Safety
Strap
(H14)
2 x Washers
(H16)
20 x Screws
(H10)
4 x Brackets
(H11)
4 x Plastic
Glides
(H17)
8 x Dowels
(H1)
8 x Long Screws
(H2)
10 x Small
Screws
(H5)
1 x CL Runner
Track
(H6)
8 x Cam Bolts
(H3)
8 x Cam Nuts
(H4)
1 x CR Runner
Track
(H7)
1 x DL Runner
(H8)
1 x DR Runner
(H9)
4 x Wedges
(H12)
4 x Wedge
Screws
(H13)

You will need
Step 1
Attach 1 x CR Runner Track (H7) to Right Side Panel (P4) with 3 x Small Screws (H5).
Attach 1 x CL Runner Track (H6) to Left Side Panel (P3) with 3 x Small Screws (H5).
Tighten with a Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
Page 5
fantasticfurniture.com.au
Step 2
You will need
Attach 4 x Cam Bolts (H3) to Top Panel (P1) as shown. Tighten with a Phillips Head Screwdriver.
(P1)
(P3)
(P4)
Phillips Head
Screwdriver
6 x Small
Screws (H5)
1 x CL Runner
Track (H6)
1 x CR Runner
Track (H7)
H7
CR
H5
H6
CL
H5
H3
H3
H3
H3
H5
H5
H5
H6
H7
H5
H5
H5

You will need
Step 3
Slide Back Panel (P5) into the grooves of Left & Right Side Panel (P3 & P4).
Insert 4 x Dowels (H1) into Top Panel (P1). Insert 4 x Cam Nuts (H4) into Left & Right Side
Panel (P3 & P4) as shown. Rotate the cam nuts so the arrow points towards the incoming
cam bolts. Attach Left & Right Side Panel (P3 & P4) to Top Panel (P1) by tightening
with the Phillips Head Screwdriver.
Step 4
Phillips Head
Screwdriver
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
Page 6
fantasticfurniture.com.au
(P1)
(P3)
(P3)
(P5)
(P4)
(P4)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H1
H1
H1
H1 H4
H4
H4

Step 6
You will need
Attach Bottom Panel (P2) to Left & Right Side Panel (P3 & P4) with 4 x Dowels (H1)
and secure with 4 x Long Screws (H2). Tighten with a Phillips Head Screwdriver.
Attach 4 x Brackets (H11) to Bottom Panel (P2) with 20 x Screws (H10) as shown.
Tighten with a Phillips Head Screwdriver.
Phillips Head
Screwdriver
Step 5
You will need
Phillips Head
Screwdriver
4 x Dowels
(H1)
fantasticfurniture.com.au Page 7
(P2)
(P2)
(P4)
(P3)
H1
H1
H2
H10 H10
H10 H10
H10 H10
H10 H10
H11
H11
H11
H11
H2
4 x Long
Screws (H2) H1
H2
H2
4 x Brackets
(H11)
20 x Screws
(H10)
H10 H10
H11

Attach 4 x Cam Bolts (H3) to Drawer Front (P7) by tightening with the Phillips Head
Screwdriver.
Turn 4 x Legs (P6) into brackets until firm. Hammer 4 x Plastic Glides (H17) on
Legs (P6 x 4) as shown.
Phillips Head
Screwdriver
You will need
Step 8
Step 7
You will need
4 x Cam Bolts
(H3)
fantasticfurniture.com.au Page 8
(P6)
(P6)
(P6)
(P6)
(P2)
(P7)
H17
H17
H17
H17
Hammer
4 x Plastic
Glides (H17)
H3 H3
H3 H3

You will need
Step 9
Phillips Head
Screwdriver
4 x Long
Screws (H2)
Step 10
Attach Drawer Back (P10) to Left & Right Drawer Side (P8 & P9) with 4 x Long Screws (H2) by
tightening with the Phillips Head Screwdriver.
Slide Drawer Base (P11) into the grooves of Left & Right Drawer Side (P8 & P9).
fantasticfurniture.com.au
(P8)
(P8)
(P9)
(P9)
(P11)
(P10)
Page 9
H2
H2
H2
H2

Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P8) and 1 x DR Runner (H9)
to the bottom of Right Drawer Side (P9) with 4 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
You will need
Step 11
Phillips Head
Screwdriver
H5
H5
H5
H5
H8
H9
4 x Cam Nuts
(H4)
fantasticfurniture.com.au
Insert 4 x Cam Nuts (H4) into
Left & Right Drawer Side (P8 & P9)
as shown. Rotate the cam nuts so the arrows point
towards the incoming cam bolts. Attach Drawer
Front (P7) to Left & Right Drawer Side (P8 & P9). Make sure that the groove lines up
the whole way around the drawer. Tighten with a Phillips Head Screwdriver.
(P9)
(P8)
(P7)
(P8)
(P9)
Page 10
H4 H4
H4
H4
You will need
Step 12
Phillips Head
Screwdriver
4 x Small
Screws (H5)
1 x DL
Runner (H8)
1 x DR
Runner (H9)