fantastic furniture Hamilton Tallboy 5 Drawer User manual

Version 1.0
Hamilton
Tallboy 5 Drawer
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 50kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Rail (P4);
Rail (P5);
Rail (P6);
Rail (P7);
4 x Back Panels (P8):
5 x Drawer Fronts (P9):
5 x Left Drawer Sides (P10) :
5 x Right Drawer Sides (P11);
5 x Drawer Bases (P12);
5 x Drawer Backs (P13);
2 x Connect Sticks (P14);
Rail (P15)
Hardware pack
Top Panel
(P1) Right Side
Panel (P3)
Left Side
Panel (P2)
Rail
(P4)
Rail
(P5)
Rail
(P15)
Rail
(P6)
Rail
(P7)
4 x Back
Panels
(P8)
Left
Drawer
Side (P10)
Drawer
Front
(P9)
×5
Right Drawer
Side (P11)
Drawer Back
(P13)
Drawer
Base (P12)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
8 x Dowels
(H1)
20 x Long
Screws
(H2)
50 x Small
Screws
(H5)
5 x CL Runner
Tracks
(H6)
40 x Cam Bolts
(H3)
40 x Cam Nuts
(H4)
5 x CR Runner
Tracks
(H7)
5 x DL
Runners
(H8)
5 x DR
Runners
(H9)
10 x Handles
(H10)
10 x Bolts
(H11)
1 x Screw
(H13)
1 x Safety Strap
(H12)
2 x Washers
(H14)
8 x Wedges
(H15)
8 x Screws
(H16)
3 x Long Screws
(H17)
2 x
Connect
Stick
(P14)

30 x Small
Screws (H5)
4 x Dowels
(H1)
(P3)
(P2)
(P2)
You will need
Step 1
H7
H7
H7
H6
H6
H6
H6
H6
H7
H7
H7
CR
H5
Step 2
You will need
Phillips Head
Screwdriver
Phillips Head
Screwdriver
16 x Cam Bolts
(H3)
Attach 5x CL Runner Tracks (H6) and 5 x CR Runner Tracks (H7) to Left & Right Side
Panels (P2&P3) with 30 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
Insert 4x Dowels (H1) into Left (P2) as shown. Attach 16 x Cam Bolts (H3) to Left & Right
Side Panels (P2&P3) by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
5 x CL Runner
Tracks (H6)
H6
CL
H5
H5
H5
H5
H5
H5
H5
H5
H5
H3
H3
H3
H3
H3
H1
H1
H3
H5
H5
5 x CR Runner
Tracks (H7)
(P3)

You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Insert 4x Cam Nuts (H4) into Rails (P6&P7) as shown.
Rotate the cam nuts so the arrow points towards the
incoming cam bolts. Attach Rails (P6 & P7) to Right Side
Panels (P3) by tightening with the Phillips Head Screwdriver.
Insert 4x Cam Nuts (H4) into Rails (P4&P5&P15) as shown.
Rotate the cam nuts so the arrow points towards the incoming
cam bolts. Attach Rails (P4&P5&P15) to Left Side Panels (P2) by
tightening with the Phillips Head Screwdriver. Join Back Panels (P8x2)
with Connect Stick (P14). Slide Back Panels (P8x2) into the grooves of Rails (P6 & P7).
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
(P2)
(P2)
(P4)
(P5)
(P6)
(P7)
(P8)
(P14)
(P15)
(P6)
(P7)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H4
H4
D
D
D
Make sure the side with
bigger holes is facing to Rail (P4).

Insert 8 x Cam Nuts (H4) into the holes of Rails (P4&P5&P6&P7&P15). Rotate the cam
nuts so the arrow points towards the incoming cam bolts. Attach Rails (P4&P5&P6&P7&P15)
to Right Side Panels (P3) by tightening with the Phillips Head Screwdriver.
Attach 4 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
You will need
Phillips Head
Screwdriver
Step 6
You will need
Step 5
8 x Cam Nuts
(H4)
Phillips Head
Screwdriver
4 x Dowels
(H1)
(P2)
(P3)
(P15)
(P5)
(P4)
(P7)
(P1)
(P6)
fantasticfurniture.com.au Page 7
H4
H1
H4
H4 H1
H3
H3
H3
H3
H4
4 x Cam Bolts
(H3)

You will need
Step 7
Gently stand the unit upright.
Join Back Panels (P8x2) with
Connect Stick (P14). Slide Back
Panels (P8x2) into the grooves of
Left & Right Side Panels (P2&P3).
Insert 6 x Cam Nuts (H4) into Left &
Right Side Panels (P2&P3) as shown.
Rotate the cam nuts so the arrows
point towards the incoming cam bolts.
Attach Top Panel (P1) to unit by tightening
cam nuts with the Phillips Head Screwdriver.
Secure Top Panel (P1) to Rail (P15) with 3 x Long Screws (H17) by tightening
with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
You will need
Step 8
Phillips Head
Screwdriver
(P8)
(P2)
(P1)
(P1)
(P1)
(P3)
(P14)
(P15)
(P15)
H4
H17 H17
fantasticfurniture.com.au Page 8
3 x Long
Screws (H17)

You will need
Step 9
Phillips Head
Screwdriver
Attach 5 x DL Runners (H8) to the bottom of Left Drawer Sides (P10x5) and 5 x DR Runners (H9)
to the bottom of Right Drawer Sides (P11x5) with 20 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
Attach 20 x Cam Bolts (H3) to Drawer Fronts (P9x5) by tightening with the Phillips Head
Screwdriver.
x5
x5
x5
(P10) (P11)
H5 H9
H8
H5
H5
H5
You will need
Step 10
20 x Small
Screws (H5)
Phillips Head
Screwdriver
5 x DR
Runners (H9)
5 x DL
Runners (H8)
20 x Cam Nuts
(H4)
fantasticfurniture.com.au Page 9
20 x Cam Bolts
(H3)
Insert 20 x Cam Nuts (H4) into Left & Right Drawer Sides (P10x5&P11x5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach
Left & Right Drawer Sides (P10x5&P11x5) to Drawer Fronts (P9x5) by tightening
the cam nuts with the Phillips Head Screwdriver.
H3 H3
H3
H3
(P9)
H4H4
H4
H4
(P9)
(P10)
(P11)
You will need
Step 11
Phillips Head
Screwdriver

Slide Drawer Bases (P12x5) into the grooves of Left & Right Drawer Sides (P10x5&P11x5).
Attach Drawer Backs (P13x5) to Left & Right Drawer Sides (P10x5&P11x5) with 20 x Long
Screws (H2) by tightening with the Phillips Head Screwdriver. Ensure the Drawer Base lines
up with the grooves the whole way around the drawer before securing.
x5
x5
fantasticfurniture.com.au Page 10
Step 12
You will need
Step 13
Phillips Head
Screwdriver
(P9)
(P12)
(P10)
(P11)
H2
(P13)
(P10)
(P11)
H2
H2
H2
20 x Long
Screws (H2)

Attach 10 x Handles (H10) to Drawer Fronts (P9x5) with 10 x Handle Bolts (H11) by tightening
with the Phillips Head Screwdriver.
Step 15
Carefully insert the drawers into the tallboy by gently guiding the runners into the tracks.
fantasticfurniture.com.au Page 11
You will need
Step 14
10 x Handle
Bolts (H11)
10 x Handles
(H10)
Phillips Head
Screwdriver
H10
H11
H10
H11
(P9)

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
You will need
Step 17
Phillips Head
Screwdriver
1 x Washer
(H14)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
Move the dresser to the final
position, and attach the
safety strap to the wall
securely. Make sure it is
firmly attached and snug fit.
Step 16
You will need
Phillips Head
Screwdriver
1 x Safety
Strap (H12)
1 x Safety Strap
Screw (H13)
1 x Washer
(H14)
8 x Wedges
(H15)
8 x Wedge
Screws (H16)
M
Secure Back Panels (P8 x 4) in place with 8 x Wedges (H15) using 8 x Wedge Screws (H16) by
tightening with the Phillips Head Screwdriver. Use 1 x Safety Screw (H13) and 1 x Washer (H14)
to connect 1 x Safety Strap (H12) on Top Panel (P1).
wall
Screw
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
fantasticfurniture.com.au Page 12
H12
H12
H13
H13
H14
H14
H14
H15
H15
H16
H16
(P1)
(P8)
(P8)