fantastic furniture Cooper Bedside 1 Drawer User manual

Version1.0
Cooper
Bedside 1 Drawer
www.fantasticfurniture.com.au

Enjoy
Yourpurchasefrom
Australia sBest Value FurnitureStore
PAGE2
www.fantasticfurniture.com.au

PAGE3
Assemblychecklist
Useful Information
Readthrough theinstructionscarefully
beforeyoubegin. Makesureyouhave alltherequiredtools.
Never use powertoolsunlessinstructed.
Identifyand layout all ofthecomponents
beforeyoubeginassembly. Unless instructed,do notfullytighten screws until the item isfullyassembled.
! Neveruse powertoolsunless specificallyinstructed.They can damage yourcomponentsor
hardwareif used incorrectly.
! The most common mistakes made during assemblyareusing the wrong hardwareorgetting
componentsback tofront.
! Always use asoft surface (such as carpet orcardboard)when assembling yourproduct to
avoidscratching ordamaging the surface of the product.
! Bulky itemssuch as wardrobes and bunk bed shouldbe assembled inthe roomthey will be
used inas they may not fit through adooronce assembled.
! Neveruse any glue until you arecertainthat the partsbelong together.
! Periodicallycheck and re-tighten all fasteners. Check the product carelabel orwebsitefor
product careinstructions.
! If you arehaving any difficulties assembling yourproduct, missing any hardwareor
componentsplease visit ourwebsiteHelpCentreforfurtherassistance.
! Please see page 2forany safetyrequirementsorweight restrictions.

PAGE4
WhatYouNeed
ToAssembletheProduct
www.fantasticfurniture.com.au
OtherTools You Need
PhillipsHeadScrewdriver
PartLIst
Box1:
1xTop Panel(P1);
1xLeft Side Panel(P2);
1xRight Side Panel(P3);
1x TopPanel Rail (P4);
1xFront Rail (P5);
1xShelf (P6);
1xBack Panel(P7);
1xDrawerFront (P8);
1xLeft DrawerSide (P9);
1xRight DrawerSide (P10);
1xDrawerBack(P11);
1xDrawerBase(P12);
HardwarePack
TopPanel
(P1)
Left Side
Panel
(P2)
RightSidePanel
(P3)
BackPanel
(P7) TopPanel Rail
(P4)
DrawerFront
(P8)
LeftDrawer
Side
(P9)
RightDrawerSide
(P10)
Drawer Back
(P11)
DrawerBase
(P12)
Shelf
(P6)
FrontRail
(P5)

Step 2
PAGE5
www.fantasticfurniture.com.au
Step 1
Insert2xwoodendowels(H3)intothefront rail (P5).
Insert 2xwoodendowels(H3) intothebackpanel(P7).
Fix5xcambolts(H1)totheleftsidepanel(P2)bytightening withaphillips head
screwdriver.
Insert2xwoodendowels(H3)intotheleft side panel (P2).
(P5)
2x Wooden
Dowels
(H3)
Phillipshead
screwdriver
You will need
5x Cam
Bolts (H1)
You will need
4x Wooden
Dowels
(H3) (P7)
(P2)

Step 4
PAGE6
www.fantasticfurniture.com.au
Step 3
Fixtheleftrunnertrack(H7)totheleftsidepanel(P2)with3xsmall screws(H9) by
tighteningwithaphillipsheadscrewdriver.
Fix5xcambolts(H1)totherightsidepanel(P3)bytightening withaphillips head
screwdriver.
Insert2xwoodendowels(H3)intotheright side panel (P3).
2x Wooden
Dowels
(H3)
Phillipshead
screwdriver
You will need
5x Cam
Bolts (H1)
3x Small Screws
(H9)
1x Left Runner
Track (H7)
You will need
Phillipshead
screwdriver (P2)
(H9)
(H9)
(H9)
(H7)

Step 6
PAGE7
www.fantasticfurniture.com.au
Step 5
Fixtherightrunnertrack(H8)totherightsidepanel(P3)with3xsmall screws(H9) by
tighteningwithaphillipsheadscrewdriver.
Insertcamnuts(H2)intothefrontrail(P5)andbackpanel(P7). Rotatethe cam nuts(H2)
sothearrowispointingtowardstheincoming cam bolt (H1).
Tofixthefrontrail(P5)andbackpanel(P7)totherightsidepanel (P3), use the phillips
headscrewdrivertotighten thecam nuts(H2).
3x Small Screws
(H9)
1x RightRunner
Track (H8)
You will need
Phillipshead
screwdriver
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
3x CamNuts
(H2) Phillipshead
screwdriver
You will need

Step 8
PAGE8
www.fantasticfurniture.com.au
Step 7
Insert2xcamnuts(H2) intothe shelf(P6).Rotatethecamnuts(H2)sothe arrow is
pointingtowardstheincomingcam bolt (H1).
Tofixthe shelf(P6)totherightsidepanel(P3),usethephillipshead screwdriver totighten
thecamnuts(H2).
Insertcamnuts(H2)intofrontrail (P5), shelf(P6) and backpanel (P7). Rotatethecam nuts
(H2)sothearrowispointingtowardstheincoming cam bolt (H1).
Tofixthefrontrail(P5), shelf(P6)andbackpanel(P7)totheleftsidepanel (P2), use the
phillipsheadscrewdrivertotighten thecam nuts(H2).
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
2x CamNuts
(H2) Phillipshead
screwdriver
You will need
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
5x CamNuts
(H2) Phillipshead
screwdriver
You will need

Step10
PAGE9
www.fantasticfurniture.com.au
Step 9
Fix7xcambolts(H1)tothetoppanel(P1)bytighteningwithaphillips head screwdriver.
Fixthetoppanelrail(P4)tothetoppanel(P1)with2xlargescrews(H4) by tightening with
aphillipshead screwdriver.
2xLarge
Screws (H4) Phillipshead
screwdriver
You will need
Phillipshead
screwdriver
You will need
7x Cam
Bolts (H1)

Step12
PAGE10
www.fantasticfurniture.com.au
Step11
Fix4xcambolts(H1)tothedrawerfrontpanel(P8)bytightening withaphillips head
screwdriver.
Phillipshead
screwdriver
You will need
Insertcamnuts(H2)intotheleftsidepanel(P2),therightsidepanel (P3) and the back panel (P7) .
Rotatethecamnuts(H2)sothearrowispointingtowardsthe incoming cam bolt (H1).
Tofixtheleftsidepanel(P2),therightsidepanel(P3)andtheback panel (P7) tothe top panel
(P1),usethephillipsheadscrewdrivertotighten the cam nuts(H2).
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
7x CamNuts
(H2) Phillipshead
screwdriver
You will need
4x Cam
bolts (H1)

Step14
PAGE11
www.fantasticfurniture.com.au
Step13
Slidethedrawerbase(P12)intothegroovesoftheleftandright drawer sides (P9, P10) and
thedrawerfront(P8).
Insert4xcamnuts(H2)intotheleftandrightdrawersides(P9,P10), rotatethe cam nuts(H2) so
thearrowispointingtowardstheincoming cam bolt (H1).
Tosecuretheleftandrightdrawersides(P9,P10)tothedrawerfront (P8), use the phillips head
screwdrivertotightenthesmall cam nuts(H2).
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
4x CamNuts
(H2) Phillipshead
screwdriver
You will need

Step16
PAGE12
www.fantasticfurniture.com.au
Step15
Fixtheleftrunner(H5)totheleftdrawerside(P9)andrightrunner(H6) tothe right drawer
side(P10)with6xsmallscrews(H9)bytighteningwiththe phillips head screwdriver.
Use4xlargescrews(H4)tofixthedrawerback(P11)tothedrawer sides (P9, P10), by tightening
withthephillipsheadscrewdriver.
Phillipshead
screwdriver
You will need
4xLarge
Screws (H4)
Phillipshead
screwdriver
You will need
6x Small Screws
(H9)
1x RightRunner
(H6)
1x LeftRunner
(H5)

PAGE13
www.fantasticfurniture.com.au
Step17
Carefullyslidethedrawerintothe cabinet.

PAGE14
www.fantasticfurniture.com.au