fantastic furniture Pod Bed Single User manual

Version 1.0
Pod
Bed Single
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Headboard (P1);
Footborad (P2);
Left Side Rail (P3);
Right Side Rail (P4):
4 x Legs (P5);
12 x Slats (P6)
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
DO NOT USE
fantasticfurniture.com.au
Right Side Rail
(P4)
Left Side Rail
(P3)
Slats
(P6)
Headboard
(P1)
Footborad
(P2)
Leg
(P5)
Leg
(P5)
Leg
(P5)
Leg
(P5)
24 x Screws
(H1)
4 x Hexagonal
Nuts
(H4)
1 x Allen Key
(H7)
12 x Long Bolts
(H3)
1 x Spanner
(H8)
4 x Plastic
Glides (H9)
4 x Headless Bolts
(H6)
4 x Half Moon
Nuts
(H5)
8 x Dowels
(H2)

You will need
Step 1
Step 2
You will need
(P1)
(P2)
(P5) (P5)
(P5)
(P5)
(P5)
Attach 2 x Plastic Glides (H9) to Legs (P5) with the Hammer. Insert 4 x Dowels (H2) into the
Footboard (P2). Attach 2 x Headless Bolts (H6) into the Footboard (P2) by rotating clockwise.
Attach 2 x Legs (P5) to the Footboard (P2) with 2 x Long Bolts (H3) by tightening
at 80 percent with an Allen Key (H7), keep a little loose on this step.
fantasticfurniture.com.au Page 5
H7
H3
H3
H3
H3
H3
H6
H2
H6
1 x Allen Key
(H7)
2 x Long
Bolts (H3)
H6
H2
H6
H2
H2
2 x Headless
Bolts (H6)
4 x Dowels
(H2)
1 x Allen Key
(H7)
2 x Long
Bolts (H3)
2 x Headless
Bolts (H6)
4 x Dowels
(H2)
H9
H9
2 x Plastic
Glides(H9) Hammer
2 x Plastic
Glides(H9) Hammer
Tighten the
long bolts at 80%.
Tighten the
long bolts at 80%.
H9
H9
Attach 2 x Plastic Glides (H9) to Legs (P5) with the Hammer. Insert 4 x Dowels (H2) into the
Headboard (P1). Attach 2 x Headless Bolts (H6) into the Headboard (P1) by rotating clockwise.
Attach 2 x Legs (P5) to the Headboard (P1) with 2 x Long Bolts (H3) by tightening at 80 percent
with an Allen Key (H7), keep a little loose on this step.

(P2)
(P3)
(P3)
(P4)
(P4)
(P5)
(P5)
You will need
Step 3
Attach the Footboard (P2) to the Left Side Rail (P3) with 1 x Half Moon Nut (H5) and 1 x Hexagonal
Nut (H4) using a Spanner (H8) as shown. Repeat this process for the Right Side Rail (P4).
You will need
Step 4
Attach 2 x Legs (P5) to the Left and Right Side Rails (P3 & P4) with 4 x
Long Bolts (H3) by tightening at 80 percent with an Allen Key (H7),
keep a little loose on this step.
fantasticfurniture.com.au Page 6
Required
Two People
Required
Two People
H7 H3
H3
2 x Hexagonal
Nuts (H4)
1 x Spanner
(H8)
2 x Half Moon
Nuts (H5)
H8
H4
H5
1 x Allen Key
(H7)
4 x Long
Bolts (H3)
The side with the
mark should face to
Headboard (P1)
H.B.

(P1)
(P3)
(P3)
(P4)
(P4)
(P5)
(P5)
Attach 2 x Legs (P5) to the Left and Right Side Rails (P3 & P4) with 4 x Long Bolts (H3) by
tightening with an Allen Key (H7). Make sure the inner space of the bed is square.
Ensure to fully tighten all bolts (H3) for attaching legs (P5) with the Allen Key (H7).
fantasticfurniture.com.au Page 7
Required
Two People
You will need
Step 5
Attach the Headboard (P1) to the Left and Right Side Rails (P3 & P4) with 2 x
Half Moon Nuts (H5), and 2 x Hexagonal Nuts (H4) using a Spanner (H8).
You will need
Step 6
2 x Hexagonal
Nuts (H4)
1 x Spanner
(H8)
2 x Half Moon
Nuts (H5)
H8
H4
H5
H7
H7
H3
H3
1 x Allen Key
(H7)
4 x Long
Bolts (H3)

(P3)
(P4)
(P6)
You will need
Step 7
fantasticfurniture.com.au Page 8
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Attach 12 x Slats (P6) to the Side Rails (P3 & P4) with 24 x Screws (H1) and tighten with a
Phillips head screwdriver.
Phillips head
screwdriver
H1
H1
24 x Screws
(H1)