fantastic furniture GALLERY User manual

G
G
Ver:1.1
GALLERY
GALLERY
Display Cabinet 4 SHELF
www.fantasticfurniture.com.au

TEMPERED GLASS should be handled wi
t
temperature and hairline fractures may cause t
h
into small, relatively harmless pieces and not sh
a
Good to know
- Never place extremely hot or cold objects dire
c
integrity of the glass and cause it to break sudd
e
-Dropping heavy, glass, ceramic, metal or simil
a
to the table leading it to break suddenly and with
E
n
Your pu
r
Australia’s Best
V
www.fantasticfurniture.com.au
t
hcare. Scratches, chips, sudden changes in
h
e glass to break. This glass is designed to break
a
rp fragments.
c
tly onto the glass surface. This may weaken the
e
nly and without warning.
ar
objects on the table may cause unseen damage
out warning.
n
joy
r
chase from
V
alue Furniture Store
PAGE 2

Assembly checkli
s
Read through the instructions carefully
before you begin
Useful Information
Identify and lay out all of the components
before you begin assembly
Useful
Information
! Never use power tools unless specifically instr
u
hardware if used incorrectly.
! The most common mistakes made during asse
components back to front.
! Always use a soft surface (such as carpet or c
a
scratching or damaging the surface of the prod
u
! Bulky items such as wardrobes and bunk beds
used in as they may not fit through a door onc
e
! Never use any glue until you are certain that th
e
! Periodically check and re-tighten all fasteners.
C
product care instructions.
! If you are having any difficulties assembling yo
u
please visit our website Help Centre for further
www.fantasticfurniture.com.au
s
t
Make sure you have all the required tools.
Never use power tools unless instructed.
Unless instructed, do not fully tighten screws
until the item is fully assembled
u
cted. They can damage your components or
mbly are using the wrong hardware or getting
a
rdboard) when assembling your product to avoid
u
ct.
should be assembled in the room they will be
e
assembled.
e
parts belong together.
C
heck the product care label or website for
u
r product, missing any hardware or components
assistance.
PAGE 3

What You Need
To assemble the product
Left
Panel
(P4)
Other tools you need
Phillips Head Screwdriver
Left
Door
(P8)
Parts list
Box 1: Base (P1); Shelf (P2);
Top Panel (P3); Left Panel (P4);
Right Panel (P5); Left Back (P6).
Box 2: Shelf
(
P2
)
x2; Ri
g
ht Back
() g
(P7); Left Door (P8); Right Door
(P9)
34 x Knob Bolt
(H1)
4 x Feet
(H2)
4
(H1)
(H2)
4 x Magnetic Catch
(H5)
2 x Strike Plates/Foam Inser
t
(H6)
(H5)
2x M4 x 14 mm Screws
(H9) 4 x Washers
(H10)
(H6)
www.fantasticfurniture.com.au
Left Back
(P6)
Right
(P6)
Top
Panel
(P3)
Back
(P7)
Right
Pl
Shelf (P2)
Shelf (P2)
P
ane
l
(P5)
Shelf (P2)
Right
Door
(P9)
Base (P1)
x M4 x 22 mm Screws
(H3)
4 x Door Hinges/Hinge Plates
(H4)
(H3)
2 x Door Handles/Foam Inserts
(H7)
t
s4 x Plastic Sleeve
(
H8
)
(H4)
(H7)
2 x Wall Straps
(H11)
()
PAGE 4

Step 1
You will need
H3
4 x Feet
(H2) 4x M4 x 22 mm
Screws (H3)
H2
Phillips Head
Screwdriver
A
ttach Feet (H2) to Base (P1) using 4 x Screws (H
3
Step 2
You will need
You
will
need
10 x Knob Bolt
(H1)
(P1)
A
ttach Left Panel (P4) to Base (P1), 3 x Shelf (P2)
Ensure holes in (P1) ~ (P3) face upwards.
www.fantasticfurniture.com.au
H2
H3
H2
H3
Base
(P1)
H2
H3
H2
3
) and tighten using Phillips Head Screwdriver.
H1
(P2)
(P2)
(P3)
(P4)
(P2)
and Top Panel (P3) with 10 x Knob Bolt (H1)
PAGE 5

Step 3
You will need
H1
10 x Knob Bolt
(H1)
A
ttach Right Panel (P5) to Base (P1), 3 x shelf (P2
Step 4
You will need
14 x Knob Bolt
(H1)
A
ttach Right and Left Back Panel (P7), (P6) to Bas
e
x Knob Bolt. With help, carefully stand the cabinet
u
www.fantasticfurniture.com.au
(P2)
(P2)
(P3)
(P1)
(P5) (P2)
) and Top Panel (P3) with 10 x Knob Bolts (H1).
H1
H1
(P7) (P6)
e
(P1), 3 x Shelf (P2) and Top Panel (P3) with 14
u
pright.
PAGE 6

Step 5
You will need Step a
2x Door Hinges/
Hinge plates (H4) Phillips Head Screwdriver
H4
Attach hinges onto doors.
Step a. Peel off backing of Hinge Plate (H4).
Step b. Paste Hinge Plate (H4) onto two corners alo
Step c. Attach the Hinges to the Hinge Plates with s
c
Repeat process for other door
Step 6
You will need
1x Door Handle/
Foam Insert (H7) 1 x Strike Plate/ Foam Insert (H6)
Step a
Attach handle and strike plate onto doors
Step a. Remove the Foam Insert from the Strike Pl
a
Step b Peel off the backing from Foam insert and p
Step
b
.
Peel
off
the
backing
from
Foam
insert
and
p
Step c. Slide the Strike Plate (H6) into position.
Step d. Remove the Foam Insert from the Door Ha
n
Step e. Peel off the backing from Foam insert and
p
Step f. Slide the Door Handle (H7) into position.
Repeat process for other door
www.fantasticfurniture.com.au
Step b Step c
H4
P9
ng the short edge of the Door (P9).
c
rews. DO NOT OVERTIGHTEN.
P9
Step b
H7
P9
Step d
Step e
Step f
a
te (H6).
paste it onto the bottom corner of the Door (P9)
Step c
H6
paste
it
onto
the
bottom
corner
of
the
Door
(P9)
.
n
dle (H7).
p
aste it onto the top corner of the Door (P9).
PAGE 7

Step 7
You will need
4 x Magnetic Catch
(H5) 4x Plastic Sleeve (H8)
Phillips Head
Screwdriver
Fasten ma
g
netic catch
(
H5
)
to the To
p
Panel
(
P3
)
a
g()p()
Insert 1x Plastic Sleeve (H8) each into the Top (P3
)
Place the Door (P11) with its hinge into the Plastic
S
Loosen the Door Hinge (H4) on the top of Door (P
9
Insert the top hinge into the plastic sleeve (H8) on
t
Slide the top corner of Door (P9) into the hinge.
Tighten the bolts on the door hinge with a Phillips
H
Repeat process for other door
Step 8
You will need
2xWallStraps(H11) 2x Washers (H10)
Phillips Head
Screwdriver
It is recommended that the unit is fixed to a wal
As wall materials vary screws for fixing to wall are n
As
wall
materials
vary
,
screws
for
fixing
to
wall
are
n
For advice on suitable screw systems, contact you
r
specialized dealer.
Move the cabinet to the desired position against a
w
Mark a line on the wall at 2 sides of top edge of the
Remove the cabinet, mark a point about 10 mm be
l
www.fantasticfurniture.com.au
A
ttach the wall strap (H11) with the appropriate scr
e
and washer (H10).
H4
H8
H5
H5 H8
H4
a
nd Base
(
P1
)
()
)
and Base (P1).
S
leeve (H8) in Base (P1)
9
) with a Phillips Head Screwdriver.
t
he Top Panel (P3).
H
ead Screwdriver ensuring contact with the hinge plate.
H11
H11
l.
not included
not
included
.
r
local
w
all.
cabinet.
l
ow the line.
PAGE 8
e
w system

Step 9
You will need
2xM4x14mm
Screws(H9)
2x Washers
(H10)
Phillips head
Screwdriver
Reposition the cabinet. Attach the cabinet at its to
p
to the Wall Straps (H11) using 2 x Screws (H9) an
d
2 x Washers (H10).
Step 10
Job co
In the interest of our environment Ple
a
www.fantasticfurniture.com.au
p
d
mplete!
a
se dispose of all packaging thoughtfully.
PAGE 9