fantastic furniture COMO DESK HUTCH User manual

COMO
DESK HUTCH
fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au PAGE 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home for your
chance to win a $250 Fantastic Furniture Gift Card!
fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 5kgs/shelf.

PAGE 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Top Panel
(P1)
Right Side
Panel
(P3)
Back Panel
(P8)
20 x Cam Bolts
(H3)
20 x Cam Nuts
(H4)
Parts list:
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Divider Panel (P4);
Shelf Panel (P5);
Shelf Panel (P6);
Back Panel (P7);
Back Panel (P8);
Back Panel (P9);
Back Panel (P10);
Rail (P11);
Rail (P12);
Divider Panel (P13)
16 x Screws
(H5)
Rail
(P12)
3 x Plates
(H6)
4 x Wedges
(H7)
2 x Brackets
(H2)
22 x Dowels
(H1)
Hardware pack
Left Side
Panel
(P2)
Divider
Panel
(P4)
Shelf Panel
(P5)
Shelf Panel
(P6)
Back Panel
(P10)
Back Panel
(P7)
Back Panel
(P9)
Rail
(P11)
2 x Bracket Screws
(H9)
2 x Large Screws
(H8)
Divider
Panel
(P13)
PAGE 4
fantasticfurniture.com.au
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
DO NOT USE

You will need
Step 1
8 x Cam Bolts
(H3)
Phillips head
screwdriver
You will need
Step 2
Secure 3 x Cam Bolts (H3) to Left Side Panel (P2) and 3 x Cam Bolts (H3) to Right Side
Panel (P3) by tightening with the Phillips Head Screwdriver.
Secure 8 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Attach 2 x Brackets (H2) to Top Panel (P1) with 2 x Bracket Screws (H9) by tightening with the
Phillips Head Screwdriver.
6 x Cam Bolts
(H3)
Phillips head
screwdriver
2 x Bracket
(H2)
2 x Bracket
Screws (H9)
(P1)
H3
H2 H3
H9
H3
H3
H3
H3
H2
H9
(P2)
(P3)
H3
H3
H3
H3
H3
H3
H3
H3
PAGE 5
fantasticfurniture.com.au

Insert 3 x Dowels (H1) & 3 x Cam Nuts (H4) into Shelf panel (P5) and Rail (P11). Attach
Left panel (P2) to Shelf panel (P5) and Rail (P11), secure by tightening Cam Nuts (H4)
with a Phillips Head Screwdriver.
Secure 3 x Cam Bolts (H3) to Divider Panel (P4) by tightening with the Phillips Head Screwdriver.
Flip the Divider Panel (P4) over and secure another 3 x Cam Bolts (H3) to the other side by
tightening with the Phillips Head Screwdriver.
Step 4
You will need
Phillips head
screwdriver
You will need
Step 3
FLIP
6 x Cam Bolts
(H3)
Phillips head
screwdriver
3 x Dowels
(H1)
3 x Cam Nuts
(H4)
H3
H3
H3
H3
H3
H3
(P4)
(P4)
(P2)
(P5)
(P11)
H4
H1
H4
H1
H1
H4
PAGE 6
fantasticfurniture.com.au
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.

Slide Back panel (P7) into the grooves of the Shelf panel (P5) and Rail (P11) as shown.
You will need
Step 5
Step 6
Phillips head
screwdriver
3 x Dowels
(H1)
3 x Cam Nuts
(H4)
(P5)
(P7)
(P11)
Ensure laminated side is
facing inwards.
H4
H1
H4
H1
H4
(P4)
(P5) (P11)
Insert 3 x Dowels (H1) & 3 x Cam Nuts
(H4) into Shelf panel (P5) and Rail (P11).
Attach Divider panel (P4) to Shelf panel
(P5) and Rail (P11), secure by tightening Cam
Nuts (H4) with a Phillips Head Screwdriver.
PAGE 7
fantasticfurniture.com.au

Insert 2 x Dowels (H1) into Shelf panel (P6), attach to Divider panel (P13) and secure with 2 x
Large Screws (H8) by tightening with a Phillips Head Screwdriver.
You will need
Step 8
Phillips head
screwdriver
3 x Dowels
(H1)
3 x Cam Nuts
(H4)
2 x Large
Screws (H8)
You will need
Step 7
Phillips head
screwdriver
2 x Dowels
(H1)
H8
H8
H1
H4
H1
H4 H4
H1
(P13)
(P6)
(P6)
(P4)
(P12)
Insert 3 x Dowels (H1) & 3 x
Cam Nuts (H4) into Shelf panel (P6)
and Rail (P12). Attach Divider panel (P4)
to Shelf panel (P6) and Rail (P12), secure
by tightening Cam Nuts (H4) with a Phillips
Head Screwdriver.
PAGE 8
fantasticfurniture.com.au

Slide Back panel (P9) into the grooves of the Shelf panel (P6) and Rail (P12) as shown.
Step 9
You will need
Step 10
Phillips head
screwdriver
3 x Dowels
(H1)
3 x Cam Nuts
(H4)
Ensure laminated side is
facing inwards.
(P6)
(P12)
(P3)
H4
H1
H4
H1
H4
(P9)
Insert 3 x Dowels (H1) & 3 x Cam Nuts
(H4) into Shelf panel (P6) and Rail (P12).
Attach Right Side panel (P3) to Shelf panel
(P6) and Rail (P12), secure by tightening Cam
Nuts (H4) with a Phillips Head Screwdriver.
(P6) (P12)
PAGE 9
fantasticfurniture.com.au

Insert 8 x Dowels (H1) & 8 x Cam Nuts (H4) into the Left Side Panel (P2), Right Side panel (P3),
Divider Panel (P4) and Divider Panel (P13). Attach Top Panel (P1) to the unit and secure by tighteni
n
the Cam Nuts (H4) with the Phillips Head Screwdriver.
You will need
Step 12
Step 11
Phillips head
screwdriver
8 x Dowels
(H1)
8 x Cam Nuts
(H4)
(P4)
(P2)
(P8)
(P10)
(P3)
(P4)
(P2)
(P3)
H4
H1
H1
H4
H1
H1
H1
H4
(P13)
Ensure laminated side is
facing inwards.
(P1)
Slide Back panels (P8) & (P10) into the grooves of the Left panel (P2),
Divider panel (P4) & Right panel (P3) as shown.
H4
PAGE 10
fantasticfurniture.com.au