fantastic furniture Ashford User manual

Version2.0
Ashford
BookcaseLargeNarrow
www.fantasticfurniture.com.au

Enjoy
Yourpurchasefrom
Australia sBest Value FurnitureStore
PAGE2
www.fantasticfurniture.com.au
WARNING: ENSURETHEWALL STRAP ISATTACHEDTO
AVOIDSERIOUSINJURY.
Toavoid anyseriousor fatal injury,thisproducthasbeenprovided witha
wallstraptopreventtoppling.Westronglyrecommendthatthis product is
permanentlyfixedtothewallorothersuitablesurface.Fixing devices are
notincludedsincedifferentsurfacematerialsrequire different attachments.
Pleaseseekprofessionaladviceifyouare indoubtofwhat fixing deviceto
use.
Weight limit: 30kgspershelf

PAGE3
Assemblychecklist
Useful Information
Readthrough theinstructionscarefully
beforeyoubegin. Makesureyouhave alltherequiredtools.
Never use powertoolsunlessinstructed.
Identifyand layout all ofthecomponents
beforeyoubeginassembly. Unless instructed,do notfullytighten screws until the item isfullyassembled.
! Neveruse powertoolsunless specificallyinstructed.They can damage yourcomponentsor
hardwareif used incorrectly.
! The most common mistakes made during assemblyareusing the wrong hardwareorgetting
componentsback tofront.
! Always use asoft surface (such as carpet orcardboard)when assembling yourproduct to
avoidscratching ordamaging the surface of the product.
! Bulky itemssuch as wardrobes and bunk bed shouldbe assembled inthe roomthey will be
used inas they may not fit through adooronce assembled.
! Neveruse any glue until you arecertainthat the partsbelong together.
! Periodicallycheck and re-tighten all fasteners. Check the product carelabel orwebsitefor
product careinstructions.
! If you arehaving any difficulties assembling yourproduct, missing any hardwareor
componentsplease visit ourwebsiteHelpCentreforfurtherassistance.
! Please see page 2forany safetyrequirementsorweight restrictions.

PAGE4
WhatYouNeed
ToAssembletheProduct
www.fantasticfurniture.com.au
OtherTools You Need
PhillipsHeadScrewdriver
PartLIst
Box1:
1xTop Panel(P1);
1xLeft Side (P2);
1xRight Side (P3);
1xFront Rail (P4);
4xShelf (P5);
1xBottomShelf (P6);
1xFront Plinth(P7);
1xLeft Post (P8);
1xRight Post (P9);
2xSide Plinth(P10);
5xBackPanel(P11);
TopPanel
(P1)
Left Side
(P2)
RightSide
(P3)
FrontRail
(P4)
Shelf
(P5)
Bottom
Shelf
(P6)
Front Plinth
(P7)
Left Post
(P8)
RightPost
(P9)
SidePlinth
(P10)
SidePlinth
(P10)
BackPanel
(P11)
Shelf
(P5)
Shelf
(P5)
Shelf
(P5)
BackPanel
(P11)
BackPanel
(P11)
BackPanel
(P11)
BackPanel
(P11)

Step 2
PAGE5
www.fantasticfurniture.com.au
Step 1
Fix4xCamBolts(H1)toTopPanel(P1)bytighteningwithaPhillips head screwdriver.
Fix10xCamBolts(H1)toLeftSide(P2)bytighteningwithaPhillips head screwdriver.
Insert6xWoodenDowels(H3)intoLeft Side (P2).
(P1)
(P2)
(H3)
(H1)
(H1)
(H1)
4x CamBolts
(H1) Phillipshead
screwdriver
You will need
(H3)
(H3)
(H3)
(H3)
(H3)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
6x Wooden
Dowels (H3)
10xCamBolts
(H1) Phillipshead
screwdriver
You will need

Step 3
Step 4
www.fantasticfurniture.com.au PAGE6
Fix10xCamBolts(H1)toRightSide(P3)bytighteningwithaPhillips head screwdriver.
Insert6xWoodenDowels(H3)intoRight Side (P3).
Insert4xWoodenDowels(H3)intoShelf (P5).
Repeatfortheremaining3xShelves (P5).
(P3)
(H3)
(H3)
(H3)
(H3)
(H3) (H3)
6x Wooden
Dowels(H3)
10xCamBolts
(H1) Phillipshead
screwdriver
You will need
You will need
16x Wooden
Dowels(H3)

Step 5
Step 6
www.fantasticfurniture.com.au PAGE7
Fix7xCamBolts(H1)toLeftPost(P8)bytighteningwithaPhillips head screwdriver.
Fix7xCamBolts(H1)toRightPost(P9)bytighteningwithaPhillips head screwdriver.
Insert6xWoodenDowels(H3)intoBottom Shelf (P6).
(P9)
(P6)
(H1)
(H3)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
14xCamBolts
(H1) Phillipshead
screwdriver
You will need
(H3)
(H3)
(H3)
(H3)
(H3)
You will need
6x Wooden
Dowels(H3)

Step 8
Step 7
www.fantasticfurniture.com.au PAGE8
Fix3xCamBolts(H1)toFrontPlinth(P7)bytighteningwithaPhillips head screwdriver.
AttachSidePlinth(P10)toLeftSide(P2)with2xLargeScrews(H4) by tightening
withaPhillips headscrewdriver.
(P7)
(H1)
2x Large Screws
(H4) Phillipshead
screwdriver
You will need
(H1)
(H1)
3x Cam bolts
(H1) Phillipshead
screwdriver
You will need
Ensure sloping edge of
Side Plinthis in correct
position.

Step 9
Step10
www.fantasticfurniture.com.au PAGE9
AttachSidePlinth(P10)toRightSide(P3)with2xLargeScrews(H4) by tightening
withaPhillips headscrewdriver.
InsertCamNuts(H2)intoLeftSide(P2),rotatetheCamNuts(H2) so the arrow is
pointingtowardstheincomingCam Bolts(H1).
TosecuretheLeftPost(P8)totheLeftSide(P2)usethePhillips Head screwdriver to
tightentheCamNuts(H2).
(P3)
(P10)
(H4)
2x Large Screws
(H4) Phillipshead
screwdriver
You will need
(H4)
6xCamNuts
(H2)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
You will need
Ensure sloping edge of
Side Plinthis in correct
position.

Step12
Step11
www.fantasticfurniture.com.au PAGE10
InsertCamNuts(H2)intoRightSide(P3),rotatetheCamNuts(H2) so the arrow is
pointingtowardstheincomingCam Bolt (H1).
TosecuretheRightPost(P9)totheRightSide(P3)usethePhillips Head screwdriver to
tightentheCamNuts(H2).
InsertCamNuts(H2)intoBottomShelf(P6),rotatetheCamNuts(H2) so the arrow is
pointingtowardstheincomingCam Bolt (H1).
TosecuretheFrontPlinth(P7)totheBottomShelf(P6) use the Phillips Head
screwdrivertotightentheCam Nuts(H2).
(P3)
(P9)
(H2)
(P6)
(P7)
(H2)
6xCamNuts
(H2)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
You will need
(H2)
(H2)
(H2)
(H2)
(H2)
3xCamNuts
(H2)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
You will need
(H2)
(H2)

Step 13
Step 14
www.fantasticfurniture.com.au PAGE11
InsertCamNuts(H2)intoFrontRail(P4),Shelves(P5x4)and Bottom Shelf (P6).
RotatetheCamNuts(H2)sothearrowispointingtowards the incoming Cam Bolt
(H1).
TofixtheFrontRail(P4),Shelves(P5x4)andtheBottomShelf (P6) tothe Left Side
(P2),usethePhillipsHeadscrewdrivertotightenthe Cam Nuts(H2).
InsertCamNuts(H2)intoFrontRail(P4),Shelves(P5x4)andBottom Shelf (P6). Rotate
theCamNuts(H2)sothearrowispointingtowardstheincomingCam Bolt (H1). Tofix
theFrontRail(P4),Shelves(P5x4)andtheBottomShelf(P6)tothe Right Side (P3),
usethePhillipsHeadscrewdrivertotightenthe Cam Nuts(H2).
(P4) (P5)
(P3)
(H2)
(P5)
(P5)
(P5)
(P6)
(P2)
(P4)
(P5)
(P5)
(P5)
(P5)
(P6) (H2)
11 x CamNuts
(H2)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
You will need (H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
11 x CamNuts
(H2)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
You will need (H2)
(H2)
(H2)
(H2)
(H2)
(H2)(H2)
(H2)(H2)
(H2)
Ensuresmallerholeson
FrontRail are facing
upwards.

Step 16
Step15
PAGE12
www.fantasticfurniture.com.au
Use2xLargeScrews(H4)tofixLeftandRightPosts(P8+P9) tothe Front Plinth
(P7)usingthePhillipsHeadscrewdriver.
Slide5xBackPanels(P11)intothegroovesoftheLeft and Right Sides (P2+ P3).
(P11)
(P11)
(P11)
(P11)
(P11)
(H4)
2x Large Screws
(H4) Phillipshead
screwdriver
You will need

Step 17
Step 18
www.fantasticfurniture.com.au PAGE13
InsertCamNuts(H2)intoLeftandRightSidePanels(P2,P3).Rotatethe Cam Nuts(H2) so the
arrowispointingtowardstheincomingCamBolt(H1).TofixtheLeftandRight Sides (P2, P3) tothe
TopPanel(P1),usethePhillipsHeadscrewdrivertotightentheCam Nuts(H2). Use 2xLarge
Screws(H4)tofixtheFrontRail(P4)totheTopPanel(P1)usingthe Phllips Head screwdriver.
EnsurethetopBackPanel(P11)isslottedfirmlyintothegroove of the Top Panel (P1)
beforesecuring allBack Panels. Use theBack PanelScrews(H9)inbetweenthe Back
PanelstosecuretheBackPanels(P11x5)totheShelves (P5x4)by tighteningwith
the Phillips Headscrewdriver.
(P2)
(H4)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
2x LargeScrews
(H4) Phillipshead
screwdriver
You will need
4xCamNuts
(H2)
(H4)
Phillipshead
screwdriver
You will need
8x BackPanel
Screws (H9)
(P11) (H9)
(P1)

Step 19
www.fantasticfurniture.com.au PAGE14
FixWallStrap(H7)tobackoftheTopPanel(P1)withLargeScrew (H4) and Washer
(H8),bytighteningwiththePhillipsHead screwdriver.
Westrongly advisethat you use
the wall safety strapprovidedto
preventtheunittoppling.
1xWallStrap
(H7)
1x Washer
(H8)
Phillipshead
screwdriver
You will need
1x LargeScrew
(H4)
Step 18
Insert BackPanel Supports(H5)intothe4cornersof the assembledbookcase. Use
theSmallScrews(H6)tofixtheBackPanelSupports(H5) by tightening withthe
PhillipsHeadscrewdriver.
4xBack Panel
Support(H5)
4xSmall Screws
(H6) Phillipshead screwdriver
You will need

Step 20
Seekadvicefromaqualified
tradesperson on how to
attachsafetystrap to
the wall .
Screw andWallPlug are not
provided.
Pleaseuseappropriatefixtures
for yourwall.
PAGE15
www.fantasticfurniture.com.au
Phillipshead
screwdriver
You will need
1x Washer
(H8)

PAGE16
www.fantasticfurniture.com.au