fantastic furniture Bridge User manual

Bridge
Lamp Table Round Oak

Table Top(P1)
Table Leg Frame (P2)
2 x Table Legs(P3)
Hardware Pack
Table Leg
(P3)
Table Leg
(P3)
Table Leg Frame
(P2)
1 x Connector
(H2)
14 x Bolts
(H1)
Allen Key
(H3)
8 x Washers
(H4)
4 x Levelling Feet
(H5)

(P2)
(H3)
(H1)
(H1)
(H2)
2 x Bolts
(H1)
1 x Allen Key
(H3)
1 x Connector
(H2)
4 x Bolts
(H1)
1 x Allen Key
(H3)
(P2)
(H2)
P3
(H1)
(H3)
(H1)
Align connector (H2) to table leg frame (P2) as shown. Attach the connector (H2) to the table leg frame (P2)
using 2 x bolts (H1), using the allen key,Do not fully tighten the bolts (H1).
Align 1 x table leg (P3) to the connector (H2) and attach using 2 x bolts (H1),
Do not fully tighten the bolts (H1).
Repeat the same process for the other table leg (P3).
using the allen key,

Step 3
Page 6
(P1)
(H3)
(H1)
8 x Bolts
(H1)
1 x Allen Key
(H3)
8 x Washers
(H4)
(H4)
4 x Levelling Feet
(H5)
(H5) (H5)
(H5)
(H5)
Align the assembled legs (P2, P3) onto the table top (P1) and attach using 8 x bolts (H1)
and 8 x washers (H4), using the allen key (H3). Do not fully tighten the bolts (H1).
Attach 4 x levelling feet (H4) to the bottom of each leg (P2, P3) by screwing
clockwise until tight.
With assistance, turn the table over. Ensure the frame is stable. You may now
fully tighten all bolts (H1) using allen key (H3).
If required, the levelling feet (H4) can be adjusted by turning anti-clockwise or
clockwise as required so the table is level with the ground.
(H1)
(H4)
(H1)
(H4)
(H1)
(H4)
Note:We recommend assembling the table on a soft surface
tominimise the risk of damaging the table.

Page 7