fantastic furniture Park Lamp Table User manual

Version 1.0
Park
Lamp Table 1 Door
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
Recommended weight capacity : 20kg

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Page 4fantasticfurniture.com.au
Hardware pack
Other tools you need:
Phillips head screwdriver;

Page 5
Step 1
fantasticfurniture.com.au
Align 1 x magnet (H2) to the holes on the middle metal sheet (P4) as shown.
Secure using 2 x small screws (H5), tightening using a phillips head screwdriver .
Phillips head
screwdriver

Page 6
Step 2
fantasticfurniture.com.au
Align 1 x handle (H1) to the holes on the door panel (P6) as shown.
Secure using 2 x large screws (H4) ,tightening using a phillips head screwdrive.
Phillips head
screwdriver

Page 7
Step 3
fantasticfurniture.com.au
Align the holes on the frame (P1) with the holes on the back panel (P7).
Attach together using 2 x bolts (H3) as shown using the allen key (H6).
Do not fully tighten the bolts yet.
Ensure the hole on
frame faces inwards.

Page 8
Step 4
fantasticfurniture.com.au
Align the holes on the frame (P1) with the holes on the top metal sheet (P3).
Attach together using 2 x bolts (H3) as shown using the allen key (H6).
Do not fully tighten the bolts yet.
Repeat this step for the middle metal sheet (P4) and the bottom metal sheet (P5).

Page 9
Step 5
fantasticfurniture.com.au
Insert the door panel (P6) into the hole on the frame (P1) as shown.

Page 10
Step 6
fantasticfurniture.com.au
Insert the door panel (P6) into the hole on the frame (P2) as shown.
Align the holes on the frame (P2) with the holes on the top metal sheet (P3), middle
metal sheet (P4), bottom metal sheet (P5) and the back panel (P7).
Attach together using 8 x bolts (H3) as shown using the allen key (H6).
Do not fully tighten the bolts yet.