fantastic furniture MONCUR User manual

Version 1.0
www.fantasticfurniture.com.au
MONCUR
OFFICE CHAIR

fantasticfurniture.com.au
Page 2

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door
once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Parts list
Box 1:
Seat(P1)X1
Seat plate(P2)x1
Gas Lift(P3)x1
Star Base Cap(P4)x1
Star Base(P5)x1
Castors(P6)x5
Seat (P1)
Seat Plate (P2)
Gas Lift (P3)
Star Base Cap (P4)
Star Base (P5)
5 x Castors (P6)
4 x Bolts
(H1) (H2)
Allen Key
fantasticfurniture.com.au
Page 4

fantasticfurniture.com.au
Step 1
(P3)
(P4)
(P5)
Page 5
Note: Make sure to remove the
plastic cap from the top of gas lift.
(P5)
(P6)
(P6)
(P6)
(P6)
(P6)
Insert 5x castors(P6) into the Star Base (P5) as shown . Push down firmly on each castor to
ensure they are fixed in position
Remove the plastic cap from the top of the Gas Lift(P3).
Place the Star Base Cap(P4) onto the Star Base(P5).
Insert the Gas Lift(P3) into the Star Base Cap(P4)
and the top of the Star Base(P5) as shown.

Allen Key
(H2)
4 x Bolts
(H1)
(H2)
(H1)
(P2)
(P1)
Step 4
(P2)
(P3)
You will need
Align the holes on the Seat Plate (P2) with the bottom of the Seat(P1) and use the Allen Key(H2)
to fasten 4x Bolts (H1) to the Seat (P1).
Ensure the front of the Seat Plate(P2) is in the correct direction before securing to the base of the
Seat(P1).
(P1)
fantasticfurniture.com.au
Page 6
Position the centre hole on the Seat Plate(P2) over the top of the Gas Lift (P3).
Carefully lower the Seat(P1) onto the Gas Lift (P3).Press seat down firmly.
Check the connection is secure before sitting in the chair.

Job Complete !
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au
Page 7