fantastic furniture Bridge User manual

Bridge
Console Table Oak

Step 2

Step 3

Table Top(P1)
2 x Table Leg Frames(P2)
4 x Support Bars(P3)
4 x Small Bolts
(H2)
4 x Washers
(H3)
4 x Levelling Feet
(H5)
8x Large Bolts
(H1)
Allen Key
(H4)
Support Bar(P3)
Support Bar(P3)
Support Bar(P3)
Support Bar(P3)
Table Leg Frame
(P2)
Hardware Pack
Table Leg Frame
(P2)
Step 4
Parts list
Table Top
(P1)

P3
Step 1
Step 5
Allen Key
(H4)
4 x Large Bolts
(H1)
P2
H4
H1
Align 2 x Support Bars (P3) between the 2 x Table Leg Frame (P2).
Attach using 4 x Large Bolts (H1) tightening with the Allen Key (H4).
Do not fully tighten the bolts until Step 2.
What you need:

P3
Step 2
Step 6
Allen Key
(H4)
4 x Large Bolts
(H1)
H4
H1
Align 2 x support bars (P3) between the 2 x table leg frames (P2).
Attach using 4 x Large Bolts (H1) tightening with the allen key (H4).
You may now fully tighten all bolts securing the support bars (P3)
to the table leg frames (P2).
What you need:

Step 3
Step 7
4 x Small Bolts
(H2)
4 x Washers
(H3)
4 x Levelling Feet
(H5)
Allen Key
(H4)
H5
P1
H4
H2
H3
What you need:
Place the assembled frame (P2,P3) onto Table Top (P1).
Align the holes on the Leg Frames (P2) with the holes on the
Table Top (P1).
Attach using 4 x Small Bolts (H2) and 4 x Washers (H3) and tightening
with Allen Key (H4).
Attach 4 x Levelling Feet (H5) into the holes on the 2 x Leg Frame (P2)
by turning clockwise until tight.
Carefully turn the table over.

Step 8
Step 4
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.