Fanvil i30 User manual

[键入文字]
i30 SIP Video Door Phone
User Manual V1.0

[键入文字]
Document VER Firmware VER Explanation Time
V1.0 2.1.1.2545 Initial issue 20161117

[键入文字]
Safety Notices
1. Please use the specified power adapter. If you need to use the power adapter provided by other
manufacturers under special circumstances, please make sure that the voltage and current provided is
in accordance with the requirements of this product, meanwhile, please use the safety certificated
products, otherwise may cause fire or get an electric shock.
2. When using this product, please do not damage the power cord either by forcefully twist it, stretch
pull, banding or put it under heavy pressure or between items, otherwise it may cause damage to the
power cord, lead to fire or get an electric shock.
3. Before using, please confirm that the temperature and environment is humidity suitable for the
product to work. (Move the product from air conditioning room to natural temperature, which may
cause this product surface or internal components produce condense water vapor, please open power
use it after waiting for this product is natural drying).
4. Please do not let non-technical staff to remove or repair. Improper repair may cause electric shock,
fire, malfunction, etc. It would lead to injury accident or cause damage to your product.
5. Do not use fingers, pins, wire, other metal objects or foreign body into the vents and gaps. It may
cause current through the metal or foreign body, which may even cause electric shock or injury
accident. If any foreign body or objection falls into the product please stop using.
6. Please do not discard the packing bags or store in places where children could reach, if children trap
his head with it, may cause nose and mouth blocked, and even lead to suffocation.
7. Please use this product with normal usage and operating, in bad posture for a long time to use this
product may affect your health.
8. Please read the above safety notices before installing or using this phone. They are crucial for the safe
and reliable operation of the device.

[键入文字]
Directory
I. PRODUCT INTRODUCTION................................................................................................................ 6
1. APPEARANCE OF THE PRODUCT .............................................................................................................. 6
2. DESCRIPTION .................................................................................................................................... 6
II. START USING.................................................................................................................................... 7
1. CONFIRM THE CONNECTION.................................................................................................................. 7
1) Power, Electric Lock, Indoor switch port..................................................................................... 7
2) Driving mode of electric-lock(Default in active mode) ................................................................ 7
3) Wiring instructions .................................................................................................................... 8
2. QUICK SETTING ................................................................................................................................. 9
III. BASIC OPERATION....................................................................................................................... 10
1. ANSWER A CALL .............................................................................................................................. 10
2. CALL ............................................................................................................................................ 10
3. END CALL....................................................................................................................................... 10
4. OPEN THE DOOR.............................................................................................................................. 10
IV. PAGE SETTINGS........................................................................................................................... 11
1. BROWSER CONFIGURATION ................................................................................................................ 11
2. PASSWORD CONFIGURATION .............................................................................................................. 11
3. CONFIGURATION VIA WEB................................................................................................................. 12
(1) System ................................................................................................................................. 12
a) Information.......................................................................................................................... 12
b) Account................................................................................................................................ 13
c) Configurations...................................................................................................................... 14
d) Upgrade ............................................................................................................................... 14
e) Auto Provision...................................................................................................................... 15
f) Tools .................................................................................................................................... 17
(2) Network............................................................................................................................... 18
a) Basic .................................................................................................................................... 18
b) Advanced ............................................................................................................................. 19
c) VPN...................................................................................................................................... 21
(3) Line...................................................................................................................................... 23
a) SIP ....................................................................................................................................... 23
b) Basic Settings ....................................................................................................................... 28
(4) EGS Setting........................................................................................................................... 29

[键入文字]
a) Features............................................................................................................................... 29
b) Audio ................................................................................................................................... 32
c) Video ................................................................................................................................... 33
d) MCAST ................................................................................................................................. 35
e) Action URL ........................................................................................................................... 38
f) Time/Date............................................................................................................................ 39
(5) EGS Cards............................................................................................................................. 40
a) EGS Cards............................................................................................................................. 40
b) EGS ACCESS .......................................................................................................................... 42
(6) EGS Logs............................................................................................................................... 43
(7) Function Key ........................................................................................................................ 44
a) Function Key Settings ........................................................................................................... 44
V. APPENDIX ...................................................................................................................................... 47
1. TECHNICAL PARAMETERS.................................................................................................................... 47
2. BASIC FUNCTIONS ............................................................................................................................ 48
3. SCHEMATIC DIAGRAM ....................................................................................................................... 48
VI. OTHER INSTRUCTIONS ................................................................................................................ 49
1. OPEN DOOR MODES ......................................................................................................................... 49
2. MANAGEMENT OF CARD.................................................................................................................... 50

[键入文字]
6/ 54
I. Product introduction
i30 is a full digital network door phone. It uses mature VoIP solution (Broadcom chip), with
stable and reliable performance; it supports hands-free with full-duplex, which voice is loud and clear;
I30 have generous appearance, also solid durable, easy for installation, comfortable keypad and low
power consumption.
I30 video door phone supports entrance guard control, voice intercom, ID card and keypad
remote opening the door.
1. Appearance of the product
2. Description
Buttons and icons Description Function
Numeric keyboard Input password to open the door or dial for call
Programmable
keys
It can be set with a variety of functions in order
to meet the needs of different occasions
Induction zone RFID induction area
Camera Video signal acquisition and transmission
Lock status Door unlocking: On
Door locking: Off
Call/Ring status
Standby: Off
Talking: On
Ringing: Blink every 1 second
Network/SIP
Registration
Network error: Blink every 1 second
Network running: Off
Registration failed: Blink every 3 second
Registration succeeded: On

[键入文字]
7/ 54
II. Start Using
Before you start to use the equipment, please make the following installation.
1. Confirm the connection
•Confirm whether the equipment of the power cord, network cable, electric lock control line
connection and the boot-up is normal. (Check the network state of light)
1) Power, Electric Lock, Indoor switch port
Voice access the power supply ways: 12v/DC or POE.
CN7
1 2 3 4 5 6 7
+12V VSS NC COM NO S_IN S_OUT
12V 1A/DC Electric-lock switch Indoor switch
2) Driving mode of electric-lock(Default in active mode)
【Note】When the device is in active mode, it can drive 12V/700mA switch output maximum（maximally）;
if the electric-lock needs power supply over 12V/70mA, it will ask the device in passive mode to get
additional power to drive the lock switch on/off.
When using the active mode, it is 12V DC output.
When using the passive mode, output is short control (normally open mode or normally close mode).
Jumper in passive mode
Jumper in active mode

[键入文字]
8/ 54
3) Wiring instructions
NO: Normally Open Contact.
COM: Common Contact.
NC: Normally Close Contact.
Driving Mode Electric lock
Jumper port Connections
Active Passive No electricity
when open
When the
power to open
√
√√
√√
√√
√√

[键入文字]
9/ 54
2. Quick Setting
The product provides a complete function and parameter setting. Users may need to have the
network and SIP protocol knowledge to understand the meaning all parameters represent. In order to
let equipment users enjoy the high quality of voice service and low cost advantage brought by the
device immediately, here we list some basic but necessary setting options in this section to let users
know how to operate I30 without understanding such complex SIP protocols.
In prior to this step, please make sure your broadband Internet can be normally operated, and
you must complete the connection of the network hardware. The product factory default network
mode is DHCP. Thus, only connecting equipment with DHCP network environment would let system
have network access automatically.
Press and hold “#” key for 3 seconds; the door phone would report the IP address by voice. Or you
can also use the "iDoorPhoneNetworkScanner.exe" software to find the IP address of the device.
Note: when the I30 is powered on, 30s waiting is needed for device running.
Log on to the WEB device configuration.
In a line configuration page, service account, user name, server address and other parameters are
required for server address registration.
You can set DSS key in the function key page.
You can set Door Phone parameters in the webpage (EGS Settings -> Features).

[键入文字]
10 / 54
III.Basic operation
1. Answer a call
When a call comes in, the device would answer automatically. If you cancel auto answer feature and
set auto answer time, you would hear the ring at the set time and the device would auto answer
after configured timer.
2. Call
Configure shortcut key as hot key and then set up a number; after that you might press the shortcut
key for making call to the configured extension(s).
3. End call
Enable Release（You can enable release）key for hanging up feature to end call.
4. Open the door
You might open doors through the following seven ways:
1) Input password on the keyboard to open the door.
2) Access to call the owner and the owner enter the remote password to open the door.
3) Owner/other equipment call the access control and enter the access code to open the door. (access
code should be included in the list of access configuration, and enabled for remote calls to open the
door)
4) Swipe the RFID cards to open the door.
5) By means of indoor switch to open the door.
6) Private access code to open the door.
Enable for local authentication, and set private access code. Input the access code directly under
standby mode to open the door. In this way, the door log would record corresponding card number
and user name.
7) Active URL control command to open the door.
URL is “http://user:pwd@host/cgi-bin/ConfigManApp.com?key=F_LOCK&code=openCode”
a. User and pwd is the user name and password of logging in web page.
b. “openCode” is the remote control code to open the door.
Example: “http://admin:admin@172.18.3.25/cgi-bin/ConfigManApp.com?key=*”