Fein Sheet Metal Shear BLs 2.5 User manual

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
April15, 2004
BLs 2.5
Sheet Metal Shear

Fein Power Tools
BLs 2.5 Parts List
Item Item Number Description Reqd.
10 3-19-01-109-02-4 MOTOR HOUSING 1
20 3-28-16-051-00-1 SWITCH ROD 1
30 3-28-05-152-00-9 SLIDING BUTTON 1
40 5-1-272-004-11-9 FIELD COIL 1
50 4-30-70-014-00-0 SCREW 2
60 3-14-28-114-00-8 AIR CONDUCTING RING 1
70 3-07-12-087-01-5 BRUSH HOLDER 2
75 3-07-17-193-00-0 BRUSH CONNECTION 2
80 3-07-11-129-00-9 CARBON BRUSH 2
90 4-30-70-015-00-4 SCREW 2
100 3-07-01-060-00-0 REVERSING SWITCH 1
120 3-07-22-178-01-6 CAPACITOR 1
130 3-24-31-026-00-9 CABLE CLAMP 1
140 4-30-70-001-00-6 SCREW 2
150 3-24-27-108-01-6 COVER 1
160 4-30-70-003-00-3 SCREW 1
170 4-30-70-016-00-7 SCREW 2
180 3-07-07-101-01-2 CABLE 1
190 3-14-13-164-00-9 CABLE PROTECTING SLEEVE 1
250 5-3-272-005-11-5 ARMATURE 1
300 4-17-01-001-17-2 BALL BEARING 2
310 3-26-12-125-00-0 PACKING RING 1
330 3-15-06-353-00-7 INTERMEDIATE HOUSING 1
340 3-06-10-033-00-0 GASKET 1
350 3-36-57-105-00-2 GEAR WHEEL 41T 1
360 4-02-21-003-00-6 FITTING KEY 1
370 4-26-16-034-00-7 LOCKING RING 1
380 4-17-01-202-01-8 BALL BEARING 1
390 3-37-57-014-00-7 SPUR WHEEL 15T 1
400 3-36-57-167-00-3 GEAR WHEEL 29T 1
410 4-02-42-006-00-7 CYLINDRICAL PIN 1
420 3-13-08-076-00-9 GEAR HOUSING 1
430 3-13-08-077-00-3 PLUNGER 1
440 3-13-08-078-00-1 BOLT 1
460 3-13-08-079-00-5 SLEEVE 1
470 3-01-09-138-00-8 FOOT 1
480 6-36-01-101-00-9 CUTTER BLADE 2
490 3-34-05-027-00-6 ECCENTIC SHAFT 1
500 3-13-08-080-00-7 CONNECTING ROD 1
510 3-26-01-225-00-3 RING 1
520 4-17-01-202-01-8 BALL BEARING 2
530 4-17-15-032-00-3 NEEDLE CAGE 1
540 4-17-01-006-02-8 BALL BEARING 1
550 4-17-01-007-03-8 BALL BEARING 1
560 4-30-35-013-05-8 SCREW 1
570 4-30-35-014-05-6 SCREW 1
580 4-30-13-042-12-7 SCREW 1
590 4-30-45-044-05-1 PIN SCREW 1
600 4-26-16-001-00-5 LOCKING RING 1
640 4-30-70-026-00-6 SCREW 4
660 4-30-33-015-05-2 SCREW 2
670 4-06-11-001-00-2 PACKING RING 2
680 3-02-29-159-00-1 GUARD 1
690 4-30-35-013-05-8 SCREW 2
700 4-24-45-002-05-3 LOCKING RING 2