Ferax BTS-651 User manual

16
Vibration .................................m/s27.94
.................................................m/s2 K=1.5
Max. saw capacity (wood).......mm 115
Max. saw capacity (metal).......mm 10
2. SAFETY INSTRUCTIONS
These instructions use the following images:
There is danger of material damage
or bodily injury.
There is a chance of electric shock.
The tool meets the safety require-
ments stated in the applicable
European guidelines.
Class II equipment – Doubly insula-
ted – An earthed plug is not neces-
sary.
Read the instructions.
Wear safety glasses.
Wear ear protection.
Faulty and/or discarded electrical or
electronic apparatus have to be col-
lected at the appropriate recycling
locations.
ATTENTION!
When using electric machines always obser-
ve the safety regulations applicable in your
country to reduce the risk of fire, electric
shock and personal injury. Read the follo-
ENGLISH
Original instructions
CONTENTS
1. Technical specifications.......................16
2. Safety instructions................................16
3. Use .......................................................17
3.1 Fitting a saw blade...............................17
3.2 Removing the saw blade......................18
3.3 Adjustment of the guide shoe ..............18
3.4 Using the saw.......................................18
4 Maintenance.........................................18
4.1 Cleaning ...............................................18
4.2 Guarantee .............................................18
Spare parts list...............................................28
EC conformity declaration............................29
READ THIS OPERATORS GUIDE
CAREFULLY, BEFORE USING
THE MACHINE. ENSURE THAT
YOU KNOW HOW THE MACHINE
WORKS, AND HOW IT SHOULD BE
OPERATED.
MAINTAIN THE MACHINE
IN ACCORDANCE WITH THE
INSTRUCTIONS, AND MAKE
CERTAIN THAT THE MACHINE
FUNCTIONS CORRECTLY.
KEEP THIS OPERATOR’S
GUIDE AND OTHER ENCLOSED
DOCUMENTATION WITH THE
MACHINE.
1.TECHNICALSPECIFICATIONS
Mains voltage.............................. V 230
Frequency.................................. Hz 50
Powerinput................................ W 650
Noloadspeed ....................... r/min 800-3000
Saw stroke................................mm 20
Weight ........................................kg 3.3
Lpa (sound pressure)............dB(A) 87+3
Lwa (acoustic capacity) .......dB(A) 98+ 3

17
wing safety instructions and also the enclo-
sed safety instructions. Keep these instruc-
tions in a safe place!
• Check workpieces for any protruding nails
etc. and remove these.
• Keepyourhandsawayfromthesurfacetobe
cut.
• Hearingprotectorsshouldbeworn.
This electric tool is doubly insulated.
All external parts are insulated from
the mains electricity so it is not
necessary that the tool is earthed.
3. USE
7 6 5 4
12
3
Fig. 1
1. On/off switch
2. Handgrip
3. Locking button
4. Footplate unlocking button
5. Quick coupling system
6. Footplate
7. Saw blade for wood
5
Fig. 2
3
1
Fig. 3
3.1 Fitting a saw blade (Fig. 2)
The machine is equipped with a quick fit sys-
tem.
• Turntheclampingringofthesawbladehol-
der as far to the left as possible and hold it
there.
• Placethesawbladeinthebladeholder.
• Letgooftheclampingring.
• Makesurewhenchangingthesawbladethat
the blade holder is free of material debris
(such as splinters of wood or metal).
• Beforeuse,alwayscheckthatthesawblade
is securely fixed.

18
3.2 Removing the saw blade
• Turntheclampingringofthesawbladehol-
der as far to the left as possible and hold it
there.
• Removethesawbladefromitsholder.
• Letgooftheclampingring.
3.3 Adjustment of the guide shoe (Fig. 1)
In order to be able to follow the footplate (6)
easily, and to make it rest properly on the mate-
rial to be sawn, you can adjust the footplate
(6). This can be done by releasing the foot-
plate unlocking button (4) under the machine
at the front and then moving the footplate (6)
forwards or backwards. Make sure that the
footplate (6) is returned to the closed position
before you begin to use the machine again.
3.4 Using the saw (Fig. 3)
Presstheon/offswitch(1)tostartthemotor.To
make the saw run continuously, press the on/
off switch (1) and then press the locking button
(3) on the side of the handgrip. To switch off
continuous running, press the on/off switch (1)
and release it again.
The small blade with fine teeth that is supplied
can be used for sawing non-ferrous metals
(max 3 mm) such as aluminium or copper.
Never put force on the saw blade when you
are sawing.
4. MAINTENANCE
Make sure the saw is disconnected from the
mains. The saw must be visually inspected
before use. If the saw is damaged or if any
parts are worn, then the saw must be repaired
by an authorised person. If the saw blade is
worn, you must replace it with a new one. An
old and worn-out blade can be dangerous and
makes the job more difficult! If the electricity
cord is damaged or worn, it must be repaired or
replaced by an authorised dealer/service centre.
When you are going to replace the machine,
take it to your local waste collection point,
where it will be dealt with in an environmen-
tally friendly way.
4.1 Cleaning
Make sure the saw is disconnected from the
mains. Only use a soft and damp cloth to clean
the machine. Do not use normal domestic clea-
ning fluids as these can damage the plastic. Do
not use petrol, paint thinners or other chemi-
cals. Do not use the machine if it is exposed to
water or other liquids.
4.2 Guarantee
Warranty conditions and product liability apply
according to national legislation.

28
BTS-651 DIAGRAM

29
BTS-651 PART LIST
No. Description Specication Qty
1 Support board 45 1
2 Rubber sleeve Rubber 1
3 Gear box ZL104 1
4 Handingcover PA6-GF30 1
5 Spring 65Mn 1
6 Lock pin 45 1
7 Spring 65Mn 1
8 Brand PA6-GF30 1
9 Pressboard Q235 1
10 Screw M4×12 2
11 Screw M4×14 1
12 cover PA6-GF30 1
13 Nut  M8 1
14 Orings Rubber 1
15 Bearing 6000-2Z 1
16 limit set of 45 1
17 Brush holder 65Mn 1
18 Bearing 6000-2Z 1
19 rightsidecover PA6-GF30 1
20 Screw ST4.2×16 3
21 leftsidecover PA6-GF30 1
22 Housing PA6-GF30 1
23 Brush holder H2 2
24 Brush holder screw ST3×8 4
25 Brush 2
26 Screw ST4.2×20 6
27 Ringthanding PA6-GF30 1
28 Screw ST4.2×13 2
29 Cordclamp PA6-GF30 1
30 Plug&cord  1
31 Cordprotector PVC 1
32 Capacitor 0.33μF 1
33 Lefthanding PA6-GF30 1
34 Switch 1
35 Actiyator 4
36 Inductance 1
No. Description Specication Qty
37 Inductance 7+1 2
38 Stator 1
39 Orentedcircle PA6-GF30 1
40 Bearing sleeve Rubber 1
41 Bearing 607-2Z 1
42 Supportboard PA6-GF30 1
43 Screw ST4.2×60 2
44 Rotor 1
45 Screw M5×10 2
46 Bearing bank Q235 1
47 Bearing 6000-2Z 1
48 Screw ST4.2×20 4
49 Gear axis 40Cr 1
50 Gear 40Cr 1
51 Circlip Gr15 1
52 Needlebearing Gr15 1
53 Circle 65Mn 1
54 Gear press 65Mn 1
55 Steelball φ4 4
56 Orented piate 40Mn 1
57 Gear box cover ZL104 1
58 Screw M5×16 2
59 Screw M5×18 6
60 Circle ZL104 1
61 Pin  40Cr 1
62 Spring 65Mn 1
63 Circle 65Mn 1
64 Out collet 45 1
65 Spring 65Mn 1
66 Inner collet 45 1
67 Circle PA6-GF30 1
68 Dustproof ring cover Q235 1
69 Dustproof ring 1
70 Ball bearing FZ1265 1
71 Pin  Gr15 1
72 Reciprocating shaft 45 1


�TM
ARETE S UPP LIES S . L .
www.aretesupplies.co m
Sabre Saw
BTS-651