Festo VIFB11-02 Series User manual

Valve terminal/Valve Sensor Terminal
with field bus connection
VIFB11-/IIFB11-02-...
Manual
164 590 GB
0503f

Author: S. Breuer, H. Hohner, E. Klotz
Editors: M. Holder, H.-J. Drung
Translation: D. Smith
Layout: Festo, Dept. KI-TD
Type setting: DUCOM
Edition 0503f
©(Festo AG & Co., D-73726 Esslingen,
Federal Republic of Germany, 1999)
The copying, distribution and utilization of this
document as well as the communication of its
contents to others without expressed authoriza-
tion is prohibited. Offenders will be held liable for
the payment of damages. All rights reserved, in
particular the right to carry out patent, utility
model or ornamental design registrations.
printed on 100% recycled paper
VIFB11 - 02
0503f I

Order no.: 164590
Title: MANUAL
Designation: P.BE-VIFB11-02-GB
VIFB11 - 02
II 0503f

Contents
Chapter 1 USER INSTRUCTIONS
Chapter 2 SYSTEM STRUCTURE
Chapter 3 TECHNICAL DESCRIPTION
Chapter 4 INSTALLATION
4.1 Fitting the valve terminal/
valve sensor terminal . . . . . . . . . . . . . . . 4-1
4.2 Installing the pneumatic
components. . . . . . . . . . . . . . . . . . . . . . . 4-5
4.3 Installing the electronic
components. . . . . . . . . . . . . . . . . . . . . . 4-21
Chapter 5 COMMISSIONING
Chapter 6 DIAGNOSIS AND ERROR TREATMENT
Appendix A DEVICENET SPECIFICATIONS
Appendix B ACCESSORIES, DEVICENET COMPATIBILITY
Appendix C INDEX
VIFB11 - 02
0503f III

VIFB11 - 02
IV 0503f

1. USER INSTRUCTIONS
VIFB11 - 02 1. User instructions
9902d 1-1

Contents
USER INSTRUCTIONS. . . . . . . . . . . . . . . . . 1-3
General safety instructions . . . . . . . . . . . . 1-3
Designated use . . . . . . . . . . . . . . . . . . . . . . . 1-3
Target group . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Important user instructions . . . . . . . . . . . . 1-5
Danger categories. . . . . . . . . . . . . . . . . . . . . 1-5
Pictograms. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Instructions on this manual . . . . . . . . . . . . . . 1-7
Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
VIFB11 - 02 1. User instructions
1-2 9902d

USER INSTRUCTIONS
General safety instructions
Designated use
The valve terminal type 02 described in this
manual is designated exclusively for use as
follows:
•for controlling pneumatic and electrical
actuators (valves and output modules)
•for interrogating electrical sensor signals by
means of the input modules.
•Use the valve terminal only as follows:
•as designated in the instructions
•in technically faultless condition
•without any modifications.
The specified limit values for pressures, tem-
peratures, electrical data, moments, etc. must
be observed when additional commercially-
available components such as sensors and
actuators are connected.
Please comply also with national and local
safety laws and regulations.
VIFB11 - 02 1. User instructions
9902d 1-3

Target group
This manual is directed exclusively at techni-
cians who are trained in control and automat-
ion technology and who have experience in
installing, commissioning, programming and
diagnosing programmable logic controllers
(PLC) and field bus systems.
VIFB11 - 02 1. User instructions
1-4 9902d

Important user instructions
Danger categories
This manual contains instructions on the
possible dangers which can occur when the
valve terminals types 02 are used.
A distinction is made between the following
instructions:
WARNING
This means that injury to human beings as
well as material damage can occur if these in-
structions are not observed.
CAUTION
This means that material damage can occur if
these instructions are not observed.
PLEASE NOTE
This means that this instruction must also be
observed.
VIFB11 - 02 1. User instructions
9902d 1-5

Pictograms
Pictograms and symbols supplement the
danger instructions and draw attention to the
consequences of dangers. The following picto-
grams are used:
Uncontrolled movements of loose tubing.
Uncontrolled movement of the connected actu-
ators.
High electric voltage or undefined switching
states of the electronic components which
affect the connected circuits.
Electrostatically vulnerable components which
will be destroyed if their contact surfaces are
touched.
The valve terminal/valve sensor terminal type
02 is very heavy. Please ensure that it is
fastened correctly and see that all operating
personnel wear safety shoes.
VIFB11 - 02 1. User instructions
1-6 9902d

Instructions on this manual
This manual contains specific information on
the installation, commissioning and disgnosis
of the programmable valve terminals types 02.
Product Design
Field bus
connection Valve size Number of valve locations
Valve terminal
type 02
●VIFB-02-.. PROFIBUS-DP
Siemens
Sinec L2-DP
1⁄8"
or
1⁄4"
4 or
6 or
8 or
10 or
12 or
14
Valve sensor terminal
type 02
●IFB-02-...
Valve terminals can also be ordered with up to
16 valve locations. The specifications given in
this documentation apply accordingly.
The following product-specific abbreviations
are used in this manual:
Abbreviation Meaning
Valve terminal
Valve sensor
terminal
Terminal
Valve terminal Typ 02
•VIFB-02-...
Valve sensor terminal
•IIFB-02-...
Valve terminal/ Valve sensor
terminal
Node Field bus node
I
O
IO
Input
Output
Input/output
PLC Programmable logic controller
IPC Industrial PC
VIFB11 - 02 1. User instructions
9902d 1-7

DeviceNet field bus protocol
PLEASE NOTE
This manual refers to valve terminals with
field bus connection FB11 as from software
status 26.02.99 (see type plate) or to software
version 2.0 (see sticker on operating system
EPROM) or later.
As from this software status the configuration
of the valve terminal is supported by two EDS
files. This manual describes commissioning
with the DeviceNet manager V3.005.
Service
If you have any technical problems, please
consult your local Festo Service.
VIFB11 - 02 1. User instructions
1-8 9902d

2. SYSTEM STRUCTURE
VIFB11 - 02 2. System structure
9902d 2-1

Contents
SYSTEM STRUCTURE. . . . . . . . . . . . . . . . . 2-3
Valve terminal . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Valve sensor terminal . . . . . . . . . . . . . . . . . . 2-4
Valve terminal/valve sensor terminal
in the control system. . . . . . . . . . . . . . . . . . . 2-5
Explanation of the system structure . . . . . . . 2-7
VIFB11 - 02 2. System structure
2-2 9902d

SYSTEM STRUCTURE
Valve terminal
Festo offers a solution to automation problems
at the machine level in the form of the valve
terminal. Solenoid valves, double solenoid
valves etc. are already fitted onto a sub-base
and have already been tested. Valve terminals
with from 4 ... 16 valve locations are available
for the automation process.
The valve terminal with field bus connection
offers the following advantages:
•decentralized preprocessing
relieves the controller (PLC)
•less wiring due to two-core cables
•clarity in system structure due to separation
of controller and machine
•valves already fitted
•valve solenoid coils already wired
•central air supply
•central exhaust
Valve terminal Circuitry
Field bus
connection via
four-core cable
(twisted, screened)
Type 02
Fig. 2/1: Valve terminal type 02
VIFB11 - 02 2. System structure
9902d 2-3

•device already tested
A field bus system also offers the following
advantages:
•a reduction in the number of output
modules in the controller
•economic data transfer over long distances
•high baud rate
•a large number of slaves can be linked into
the network
•error diagnosis is made easier
Valve sensor terminal
Complex automation tasks require the use of
sensors for which Festo offers the valve
sensor terminal. Solenoid valves, double sole-
noid valves etc. are fitted onto a sub-base and
have already been tested; two sensors per
valve can be connected on site. Valve sensor
terminals with from 4 ... 14 valves are available
for the automation process.
Valve sensor terminal Circuitry
Field bus
connection via four-
core cable (twisted,
screened)
Fig. 2/2: Valve sensor terminal type 02
VIFB11 - 02 2. System structure
2-4 9902d

The valve sensor terminal includes all the
advantages of the valve terminal. It also offers:
•two inputs per valve location, e.g. for sensors
•two additional inputs
•two additional outputs, e.g. for electric actua-
tors, displays etc..
Valve terminal/valve sensor terminal in the
control system
The valve terminals can be connected to the
control systems of various manufacturers. This
manual deals with the configuration of the
controller for addressing the valve terminal with
the following automation systems (extract, as
at February 1999):
Controller
manufacturer Controller (PLC) Field bus module/ interface Field bus
Allen-Bradley PLC 5/xx
SLC 500
PC/IPC
1771-SDN
1747-SDN
1170-KFD
DeviceNet
Festo SF60 1747-SDN compatible DeviceNet
Philips P8 Compact line DLC 100/200 DIOS
Selectron PMC 40
MAS
PC / IPC
CPU 42
CPU 751/752
PCI 701
RDC
SELECAN
SELECAN
Fig. 2/3: Summary of possible controllers/field bus protocols
VIFB11 - 02 2. System structure
9902d 2-5

Further field bus slaves
Industrial PC/ controller
Field bus
DeviceNet
DIOS
SELECAN
Valve terminal type 02
Valve sensor terminal
type 02
Fig. 2/4: System summary and possible variants of the valve terminals
VIFB11 - 02 2. System structure
2-6 9902d