FingerTec Face ID2 User manual

4
TCMS V2
Quick Start Guide
For more info go to http://user.fingertec.com
TCMS V2 Installation
TCMS
V2
TimeControl Management System-V2
SOFTWARE
INSTALLATION
*Refer to TCMS V2 Manual
SOFTWARE SETTINGS
*Refer to TCMS V2 Manual
Face ID2
1
HARDWARE
INSTALLATION
Refer to hardware user manual /
installation guide/AdapTec AC & Plus
installer manual (consult qualied
installer)
FingerTec Terminal
Installation
2
HARDWARE SETTINGS
Refer to hardware user manual
User Enrollment
Face, Fingerprint,
Card, password
Communication
Settings
3
5TCMS V2 Initial
Download user information
Download user, face, ngerprint, card
and password from terminal to computer
with TCMS v2
User Information
Fill up user information in TCMS V2
6
7
SOFTWARE SETTINGS
*Refer to TCMS V2 Manual. SET ALL if using both functions.
For Time Attendance Functions
(Skip steps 8 & 9 if you are NOT using time attendance functions)
Settings of Working Time & Group
Assign Users To Working Group
For Door Access Functions
(Skip steps 10,11 &12 if you are NOT using door access functions)
Time Zone & Access Code Settings
Assign User With Access Code
Upload Settings to Terminal
8
9
10
11
12
01101101100010010
10111010111010001
0111001101000101
011011011100101010
0100100101110010
0110110110001110
1011101011101010
0111001101001001
01101101110010101
0101010101101001
DAILY OPERATION
*Refer to TCMS V2 Manual
Download Data From
Terminal To Computer
Exporting Data Into Third Party
Software (i.e. Payroll)
* Skip this step if you are NOT using third party
software
View & Print Report
13
14
15
START
COMPLETE

System Overview
ENROLLMENT OF FACE
Press Menu > User icon > Add > User ID:1 >
Insert User ID > Select Face > Follow
instructions from Face ID to complete the
enrolment (Make sure that you look at the
camera) > Select Privilege > User > Save
ENROLLMENT OF FINGERPRINT
Press Menu > User icon > Add > User ID:1 >
Insert User ID > Select Fingerprint > Place your
fingerprint 3 times following instructions
given by Face ID 2 > Select Privilege > User >
Save
VERIFICATION OF FACE
Stand in front of Face ID 2 > Look at the
camera/LCD screen >
Status bar to display the
quality of capture face
image. Adjust your position
to get as high as you can.
Twin face cameras
Shortcut
keys
Time
Infrared
lights
LED ndicator
Verication method
Mode of verication
Menu
Date & Day
Power On / O
UBS port
Fingerprint
Scanner & Card
induction area
LED INDICATOR
Color of LED Meaning
Green Standby or Verified success
Red Fail to verify
Press Menu to access the System.
Instruction to guide you to
move your head or position
during enrollment process,
Icon to guide you to adjust
your head position for best
capture image.
Area to display your face
image during enrollment.
Area to display user photo
after verication
Area to display user
information after verication
Status bar to display the quality of
capture face image. Adjust your
position to get as high as you can.
Instruction to guide you
to move your head or
position during
enrollment process
Area to display your face
image during verication.
VERIFICATION OF FINGERPRINTS
1 to 1 matching: Key in user ID > OK > Press
finger on scanner > Look at the LCD and LED,
listen to the voice emit from terminal for result
1 to many matching: Press finger on scanner >
Look at the LCD and LED, listen to the voice
emit from terminal for result
DATE/TIME SETTINGS
Press Menu > System > Date/Time > Select
value > Save.
TCP/IP COMMUNICATION
SETTINGS
Press Menu > Connection Icon > IP Address >
Key in IP address > Repeat settings for Subnet
Mask & Gateway > Press Terminal ID > Save.
Default set value:
IP address – 192.168.1.201
Subnet mask – 255.255.255.0
Gateway – 192.168.1.1
Dev ID – 1
Password – 0

All complete hardware and software manuals are available in the FingerTec Going Green
DVD and downloadable online at http://user.fingertec.com
FingerTec TCMS V2 Roadmap
Software Initial Setup
The TCMS V2 software installer is
stored on the FingerTec Going Green
DVD which comes with all FingerTec
terminals.
TCMS V2
Assi
FingerTec Terminal
Management
Connect your FingerTec terminals to
the TCMS V2 using the product code
and activation key that are available
at the back of the DVD cover.
User’s Management
Add,delete, edit and manage user information and transaction logs.
Attendance Calculation Setup
Attendance rules and calculation
formulas must be figured out to
obtain correct attendance reports.
Download attendance in/out movement records from terminals
Retrieve the transaction logs and access reports stored in the terminals
into the server.
Access Control Setup
Set up access restrictions and door
lock settings for each group and
users.
Check and edit attendance
records
Review the records and edit /
insert / check for missing records.
Viewing In/Out records
Review access records and
monitor movement of staff.
Generating attendance
reports
Generate professional and
presentable reports for analysis.
Generating access control
reports
Generate professional and
presentable access control /
security reports.
Export attendance records for
payroll or 3rd party software
Integrate the attendance records
retrieved from FingerTec terminals
to a relevant 3rd party software.
Exporting in/out records for
3rd party software
Integrate the in/out records
retrieved from FingerTec terminals
to a relevant 3rd party software.
Certificate of Authenticity
FingerTec TCMS v2
Product Key:
YTR1-4AWE-9899
S/N: 8203602 Activation Key: K2EWF5SZ
001010
Real Time
Monitoring
In-Out
Records
Monitor
transactions
that occur in
the terminals
in a real-time
manner.
1 2
3