Fisher-Price P7681 User manual

1
Please keep this instruction sheet for future reference, as it contains important information.
This product emits flashing lights at 5-30 cycles per second.
Requires three "AA" (LR6) alkaline batteries (not included) for operation.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
www.fisher-price.co.uk
P7681

2
• Wipe this toy with a clean cloth dampened with a mild soap
and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this
toy apart.
Great Britain: Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303. www.service.mattel.com/uk.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Asia: Mattel East Asia Ltd, Room 1106, South Tower,
World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Malaysia: Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.
(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran
Tropicana Golf Country Resort, 47410 PJ. Tel: [phone].
Consumer InformationCare
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. P7681pr-0726
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO

3
Assembled Parts
#8 x 1,9 cm Screw – 23
Tighten or loosen all screws
with a Phillips screwdriver.
Do not over-tighten.
Gate
Base Connector
Bird
Window
2 Walls
Bucket
Handle (2 Pieces)
2 Bases
2
Ba
se
s

4
Assembly
• Insert four screws into the base connector and tighten.
• Turn the assembly upright.
1
• Turn over both bases on a flat surface.
• Fit the base connector onto the bases.
Hint: The base connector is designed to fit on the bases one way.
If it does not seem to fit, turn it around and try again!
3
• Position the gate so that the notched edge is up.
• Fit the peg on the bottom of the gate into the hole in the base
assembly A.
• While holding the gate in place, fit the wall with radio into the base
assembly B.
Wall with
Radio
Bottom Peg
Gate Notched Edge
Base Connector
Bases
2
A
CAUTION
This package contains small parts
in its unassembled state.
Adult assembly is required.
B

5
Assembly
7
• Carefully turn the assembly on its side.
• Insert eight screws into the holes in the bottom of the assembly
and tighten.
• Turn the assembly upright.
6
• Fit the connector on one wall into the slot on the other wall.
Push firmly to secure in place.
• Tuck the wire into the slot so that it is not pinched when
assembling the window (in step 10).
Wire
Connector
Socket
Eight Screws
5
• Insert the wall into the base assembly.
• Fit the top of each wall together.
4
• Insert the tabs on the basket into the slots in the other wall.
IMPORTANT! You must complete this assembly step for
proper function of this toy.
Wall
Basket Tabs
Slots

6
9
• Insert four screws into the holes labeled with a "1" on the other
side of the wall assembly and tighten.
8
• Fit the bird onto the wall assembly, as shown.
Screws
Screws
Screws
Bird
FRONT VIEW
BACK VIEW
Assembly
11
• Insert four screws into window and tighten.
• Move the shutter on the window back and forth to ensure
proper assembly.
10
• Fit the window onto the wall assembly.
Hint: Slide the shutter on the window all the way to the right,
as shown, before attaching the window.
Window
Screws

7
Battery Installation
• Locate the battery compartment on the back of the toy.
• Loosen the screws in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert three, new “AA” (LR6) alkaline batteries.
Hint: We recommend alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
• If this product begins to operate erratically, you may need to
reset the electronics. Slide the power/volume switch off and
then back on.
• When sounds/lights from this toy become faint or stop, it’s time
for an adult to change the batteries.
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely.
Do not dispose of product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
1,5V x 3
“AA” (LR6)
Battery Installation
12
13
• Fit the handle pieces onto the top of the assembly.
Hint: The handle pieces are designed to only fit one way. If they do
not seem to fit, turn them around and try again!
• Insert three screws into the handle assembly and tighten.
Screws
Handle Pieces
Assembly

8
Two Sides of Learning Fun!
Press the baby rooster
for music & sounds
Slide the window
from day to night
Flick the light
switch on and off
Slide the ribbon
for a surprise and
watch the lights
Spin the roller to
change pig from
muddy to clean
Flip the book pages
Feed the cow
veggie shapes
Swing the gate
Sort the veggie shapes
Drop the eggs for
counting fun
Turn the dial for
music and fun phrases
Three Interactive Play Modes!
• Slide the power/volume switch on the wall of the toy to ON
with low volume , ON with high volume or OFF .
• Slide the mode switch to Learning , Music or
Imagination mode.
Learning
• Learn alphabet, numbers, opposites and animals!
Music
• Hear songs, animal sounds, greetings and other fun sounds!
Imagination
• Listen to fun sounds effects!
Power/Volume
Switch
Mode Switch