Fisher-Price Y3610 User manual

1
Download Imaginext™ Apptivity™
Fortress app. Scan QR code below
or go to App StoreSM.
5Launch app.
2
Open playset case. Plug
case audio pin into device
headphone jack.
4
Turn OFF Multitasking
Gestures (located in
device Settings).
3Turn playset and device
power ON. Close case.
Y3610, BMM13
Scan the QR code below
Scan the QR code below
to download the app
to download the app
OFF
Scan the QR code below
Scan the QR code below
to download the app
to download the app

2
• Please keep this instruction sheet for future reference, as it contains important information.
• Requires three AA (LR6) alkaline batteries (not included) for operation.
• Adult assembly is required. Tool required for battery installation: Phillips screwdriver (not included).
• This product is compatible with first, second and third generation iPad®, and the new iPad®with Retina
display. Device not included.
• The Augmented Reality (AR) features (using the device’s camera) of this app only work with iPad®devices
that have a camera.
• Only use this product with your iPad®device properly inserted and locked in the case. Remove any other
cases from the device before inserting it in the case.
• Periodically check this product and your device for damage or cracks. Do not use if either is damaged or
broken. Follow your device’s instructions for use and care.
• Wipe this product with a clean, damp cloth. Do not immerse. Do not use alcohol or ammonia based
cleaners on the screen protector.
Consumer Information
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

3
1,5V x 3
AA (LR6)
Battery Installation
For longer life, use
alkaline batteries.
• Locate the battery compartment door on the bottom of the playset.
• Loosen the screw in the battery compartment door with a Phillips screwdriver and remove the door.
• Insert three AA (LR6) alkaline batteries.
• Replace the battery compartment door and tighten the screw. Do not over-tighten.
• If this toy begins to operate erratically, you may need to reset the electronics. Slide the power switch OFF
and back ON. If resetting does not help, it’s time for an adult to change the batteries.
Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local
authority for recycling
advice and facilities.

4
One-Time Assembly
• Fit each base into the slots on the back of the playset and push to “snap” in place.
Hint: Each base is designed to fit one way. If it does not seem to fit, try the other base.

5
Setup
Lower Case
• Turn the dial to the unlock position. Lower the case.
1
Open Case
• While pressing the buttons on each side of the case, lift the screen protector.
2

6
Insert Device
• Remove any other case from the device before inserting it in this toy.
• Turn device power ON.
• Insert the device with the headphone jack next to the audio pin inside the case.
3
Headphone
Jack
Audio Pin
Setup

7
Insert Audio Pin
• Plug the audio pin attached to the case into the headphone jack on the device.
IMPORTANT! To ensure proper interaction between your device and this toy, make sure the audio pin is
inserted completely into the device headphone jack.
Setup
4

8
Close Case
• Lower the screen protector and push until it “snaps” closed.
Setup
5
6
Power Switch
• Slide the power switch ON . The power L.E.D. lights. When finished, slide the power switch OFF .
Power
Power
L.E.D.
L.E.D.

9
• For horizontal play, explore the courtyard, collect gold and play more games! Use the enclosed figure on the screen.
• Turn the dial to the unlock position and carefully lower the case.
• For vertical play, explore the great hall of the castle and play the cannon game!
• With your device inside the case, lift the case and turn the dial to the lock position.
Defend the Fortress!
Imaginext™ Apptivity™ Fortress app can be played in horizontal (flat) or vertical (upright) mode.

10
• From the main menu, touch the arrow in the middle of the screen to begin.
• Touch to see how much gold has been collected and to purchase more gold to unlock new
digital characters.
• Touch the to go to the app Settings menu. From the app Settings menu, you can: turn background
music ON or OFF; adjust app volume and adjust cannon aiming. You will also find help. Touch the
Frequently Asked Questions (FAQs) button.
Imaginext™ Apptivity™ Fortress