FRENCH FITNESS SM200 User manual

FF-SM200
FRENCH FITNESS SM200 STAIR
MILL CLIMBER
ASSEMBLY MANUAL

10 Years Parts, 1 Year Labor (Commercial)
WARRANTY
•
Display Readouts: Calories (0-
999 (Kcal))
•Total Number of Steps Climbed
(0-9999)
•Total Height Traveled (0-999.9
Meters)
•Running Speed (24 Steps /
Minute to 164 Steps / Minute)
•Current Resistance Level (0-15)
•Time Display Range: 0:00 - 99:59
•Contact Heart Rate Sensors
TECH SPECS
•California Residents see Prop 65 WARNINGS
FEATURES
•
Number of Resistance Levels: 15
•Power Cord Included: Standard
110V, 3 Prong Outlet
•Step Height: 8.25"
•Step Depth: 9.25"
•Step Width: 22"
•Max Load Weight：440lbs (200kg)
•Weight: 452 lbs (205kg)
•Dimensions: 57"L x 34.6"W x 84.2"H
(L:1450mm, W:880mm, H:2140mm)

CAUTION ................................................................................................................. 4
TECHNICAL STANDARDS.......................................................................................... 5
THE WHOLE MACHINE DIAGRAM............................................................................ 6
THE INSTALLATION PROCESS................................................................................... 7
STAIR CLIMBER OPERATING INSTRUCTIONS.......................................................... 12
ROUTINE MAINTENANCE ...................................................................................... 14
TABLE OF CONTENTS

4
Read all precautions and instructions in this manual before using this equipment.
1.The machine is suitable for commercial fitness clubs, clubhouse fitness,
bodybuilding training, sports training, physical education and so on.
2. The stair climber is suitable for indoor use, not for outdoor or high humidity,
does not allow water or other liquids to be splashed on the machine, does not
allow the placement or insertion of any foreign objects on the stair climber
3. Use the Stair climber should ensure its 4 feet on the ground, and placed a
smooth, reliable, and the stair climber should retain the fuselage behind the
safety of the 2000 mm * 1000 mm space.
4. Recommend the use of running machine wear sportswear and proper sports
shoes, The first time you use this device, you must have professional guidance.
In the event of an emergency, you need to stop the machine immediately.
5. Don't allow two or more than two people at the same time on the treadmill
exercise, this tester Max users weight is 170 kg.
6. The action guidance:
A. Aerobic exercise ：energy consumption, improve cardiopulmonary skills,
accelerate the blood circulation, improve human quality, achieve weight loss,
toning.
B. If it is the first time use stair climber, need to holding the handrail, to keep
thebalance of the body.
C. Adjust resistance, be sure to adjust slowly, adjustment as far as possible.
D. People walk down the stair climber in case of confirming safety.
7. Any part of treadmill can not be in loose status.
8. Incorrect or overload training may cause the damage of the motor and
controller,accelerate the aging transmission system, even bodily injuries.
9. Never touch any parts of stair climber with your finger
10. People with long hair should pay attention to the safety of hair when using.
11.When you feel uncomfortable and unusual, pls stop at once and consult to
thedoctor.
12. Before each use, ask the professional to check whether the transmission
partsare fastened, if there is loosening, please fasten or replace in a timely
manner. 12.There must be the mark of stoping using when the machine is in
maintenance. 13.If the treadmill has abnormal sound or other abnormal
conditions, please stoprunning immediately and contact our after-sales
department in time, or seekprofessional help.
14. In the lower right corner of the stair climber installed with a photoelectric
switch, if the object is detected to block, the staircase will immediately stop, pay
attention tosafe use;
15. Before each use of the stair climber, to confirm whether the brakes have
been the brake motor, the detection method is: No click to start the case, under
the stair climber pedal stair machine, if the steps will not continue to move, then
the brakes have no problem can be used, if the steps continuous movement, it is
strictly prohibited to use and contact us to change brake.
CAUTION

5
16. The stair climber is strictly prohibited to be used under the condition of
less thanac180v and voltage instability, to ensure that the voltage is ac110± 10%,
otherwisethe need to install the regulator to maintain the voltage in the demand
voltage; 17.This machine is confirmed to the type of CS in EN 957-6.
Technical Standards:
Input power supply voltage: AC1100V±10%
Time display range: 0:00 - 99:59
Height display range: 0.00——999.9mHeat
display range: 0-999 (Kcal)
Level display range: 0 - 15
Step number display range: 0 - 9999 Power
cord specification: 10A AC250V
Running speed: 24 steps / minute - 164 steps / minute

6
Head (TZ-7037B is
13.3 inch LED meter)
Screen support Armrests
External
shell
Photoelectric
switch
Auxiliary
pedal
Cyclic steps
THE WHOLE MACHINE DIAGRAM

7
Assembly instructions:
So that assembly is the principle
All of this section is intended to ensure that the stair machine can be
assembledcorrectly and easily.
●Because the size of the stair machine is large, please select the assembly
location where the stair machine will be placed and ensure there is enough
space around the stair machine.
●Place all parts of the stair machine in the empty area and remove all
packing materials. Do not discard the packing materials until the assembly
work is completed.
●All bolts must be tightened during the assembly process unless otherwise
stated, and all bolts must be tightened after the assembly work is completed.
●When assembling the stair machine, make sure all parts are assembled
accordingto the assembly drawing
THE INSTALLATION PROCESS

8
Step 1
Fixed auxiliary pedal
Assembly instructions:
(1) Remove the left and right auxiliary pedal packaging materials
(2) Fix the auxiliary pedal in the position shown in the figure, pay attention to
distinguish between left and right pedals.

9
Step 2
Connecting communication lines, assembling armrests
Assembly instructions:
(1) docking the screen support tube communication line with the stair plane main
frame communication line
(2) Fix the screen support tube to the corresponding position on the main frame.
(3) Fix the left and right handrails in the corresponding positions

10
Connect
ccommunic
ation line
Step 3
Assemble monitor and connect communication lineAssemble
details:
(1)
Connect the screen support tube communication line to the display
communication line
(2) After docking the communication line, place the meter on the joint with the
support frame and fasten it.