FURNITUREBOX EMPOLI DINING TABLE User manual

EMPOLI DINING
TABLE
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/empoli
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 2
Place table top on at surface,
with metal discs facing upwards.
Screw 1 x bolt rod [D] into each
metal disc.
Align table legs over bolt rods.
Secure legs to table top using 1 x
washer [E] followed by 1 x nut [F]
n each leg. Tighten using spanner
[G].
STEP 1
Use a clear, at, soft surface to
avoid bumps or scratches.
First connect the three legs [2]
together using the connecting
plates [A]. Use 1 x bolt [B] per hole
in each connecting plate and
loosely tighten with Allen key [C] -
ATTENTION: Be careful not to fully
tighten xings yet.

www.furniturebox.co.uk
STEP 3
Once legs are secured to
table top, go ahead and
tighten all bolts including
on the connecting plates, to
stabilise table.
Carefully, and with help, turn
your table over so it rests on
its feet. Check for stability.
Your table is now ready to
use.
FULL ASSEMBLY INSTRUCTIONS

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.