FURNITUREBOX NOVARA - OPAQUE User manual


ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/novara
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.



!



• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre


www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
 The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
45 MINUTE
BUILD
MAXIMUM
CAPACITY 100Kg



 1
Assemble on a clean, at soft surface to avoid any bumps or
scratches.
Place the table top [1] on the oor with underside facing up. Attach
each leg by aligning the ‘tab’ at the top of the leg with the pre-
drilled hole in the tabletop, and secure with 1 x washer [D] followed
by 1 x spring washer [B] and 1 x bolt [A] per leg (4 in total). You need
to use both the at washer [D] and the spring washer [B] so make
sure you don’t miss any out.



www.furniturebox.co.uk

 
Connect all four legs together in the middle using the square
connecting plate [3]. Secure using 1 x washer [D] followed by 1 x
spring washer [B] and 1 x bolt [A] per hole - for 100cm table, there
are 4 holes, for 120cm table, there are 8 holes in plate [3]. Again,
make sure you use both the at and spring washers at each hole.
Once connecting plate [3] is secured, you can then tighten all the
table legs to the table top with Allen key [E].

 4
Carefully, and with help, turn your
completed table over so it’s now
the correct way up. Check stability.
Your new table is now ready to
use.
 3
Add feet [C] to bottoms
of table legs. These
are adjustable so
you can adjust for an
imbalance / wobbly
oors.

www.furniturebox.co.uk
www.furniturebox.co.uk

WHAT THE GUARANTEE COVERS
 
e.g. lose metal threads
 
e.g. bonding/glue

e.g. legs bending

 •
 
..
 
 
 
 


e.g. the frame of the
product
ACTIVATE YOUR GUARANTEE ONLINE
scan this QR code with your phone to read
the full guarantee on line and register your
product. It only takes a moment to fill out.
Or visit: furniturebox.co.uour-guarantee