FURNITUREBOX AZURE KING User manual

AZURE KING
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/azure-double-and-King
SCAN ME

• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 200Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 2
Next, attach side pieces to
headboard.
Take side supports [3] and
[4] and slot onto dowels in
headboard [2] and support
piece [5].
Screw it all together using 6
x bolts [G] and 6 x cam locks
[B] as per the diagram. Use
Allen key [F]
STEP 1
Use a clear, at, soft surface to avoid
bumps or scratches.
Construct the headboard rst.
Take headboard piece [2] and
support piece [5] and insert 4 x
wooden dowels [C] as indicated in
diagram.

www.furniturebox.co.uk
STEP 3
Take 2 x side pieces [6] and
add 4 x dowels [C] into the
ends as per diagram - 1
dowel either end of each
side piece.
FULL ASSEMBLY INSTRUCTIONS

Follow us on Instagram
@furniturebox_uk
STEP 4
Construct bed frame.
Align headboard [2], footboard [1] and side pieces [6] - get all the
pieces into correct position before screwing anything together.
Connect side pieces to headboard and footboard with 8 x bolts [A]
and 8 x cam locks [B] - 2 at each end, on both sides.

www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
STEP 5
Place slats runner [7] onto frame as per diagram.
Screw slats into place using 6 x screw [D]
Finally, cover all exposed holes on outside of frame with stopples
[H] - x 4 in total.
ATTENTION: Should you need to move the bedframe after
assembly, carefully lift and re-position it with the help of at least
one other person. Do not attempt to drag the frame, or you could
risk damaging the structure.

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.