FURNITUREBOX SEYCHELLES User manual

SEYCHELLES
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/seychelles
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
45 MINUTE
BUILD MAXIMUM
CAPACITY
120Kg
TWO
PERSON
3 PC
24 PC
24 PC
6 PC
2 PC
8 PC
24 PC
24 PC

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clean, at, soft surface to avoid any bumps or scratches.
Assemble the table.
Place tabletop frame [A] face down on the at surface. Attach 4x legs
[B] by aligning the pre-drilled holes and securing with 4x washers [D]
followed by 4x bolts [C] on each leg - 16 in total. Tighten with Allen
key [E].
Carefully, and with help, ip your table onto its feet. Check for
stability.

www.furniturebox.co.uk
STEP 2
Assemble the corner chair.
Flip the corner chair seat [H] over - use the edge of a table to help
support if needed. Attach the 4x chair legs. Note - 3 legs are tapered
[F] and 1 leg is straight [G] - leg [G] connects to the inner corner of the
chair. Align the pre-drilled holes and connect using 3x washers [D]
followed by 3x bolts [C] for each leg - 12 in total. Fully tighten all bolts
with Allen key [E].
Turn the corner chair over to
sit on its legs and
check stability.

Follow us on Instagram
@furniturebox_uk
STEP 3
Assemble the sofa sections - there are 2 of these, for left and right
sides of the corner chair. Assembly is the same for both.
Flip sofa base [J] over - use the edge of a table to help support if
needed. Attach the 4x sofa legs. Note - 3 legs are tapered [F] and 1 leg
is straight [G] - leg [G]
connects to the inner
corner of the sofa. Align
the pre-drilled holes and
connect using 3x washers
[D] followed by 3x bolts [C]
for each leg - 12 in total.
Fully tighten all bolts with
Allen key [E].
Carefully and with help turn
the sofa over so it rests of its
legs. Check stability.
Repeat for the 2nd sofa.

www.furniturebox.co.uk
STEP 4
Assemble the benches -
there are 2 of these.
Flip bench top [R] over
and attach 4x legs [G].
Align the pre-drilled holes
and secure with using 3x
washers [D] followed by
3x bolts [C] for each leg -
12 in total. Fully tighten all
bolts with Allen key [E].
Carefully and with help
turn the bench over so
it rests of its legs. Check
stability.
Repeat for the 2nd bench.
Arrange your sofas either
side of the corner chair.
Your sofa set is now ready
to use.