Furuno FMD-3200 User manual

www.furuno.com
A
ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
ECDIS
Model FMD-3200/FMD-3300/FMD-3200-BB
(ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM)
SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATION ........................................................................................... ii
EQUIPMENT LISTS........................................................................................................ iv
1. MOUNTING..............................................................................................................1-1
1.1 Monitor Unit........................................................................................................................1-1
1.2 ECDIS Control Unit/Track Control Unit ..............................................................................1-1
1.3 Processor Unit ...................................................................................................................1-4
1.4 Sensor Adapter MC-3000S/3010A/3020D/3030D (option)................................................1-6
1.5 Intelligent Hub HUB-3000 (option) .....................................................................................1-7
1.6 Switching HUB HUB-100 (option)......................................................................................1-8
1.7 Radar Connection Box RCB-002 (option)..........................................................................1-8
2. WIRING....................................................................................................................2-1
2.1 Processor Unit ...................................................................................................................2-3
2.2 Monitor Unit......................................................................................................................2-13
2.3 Sensor Adapters (option).................................................................................................2-15
2.4 Intelligent HUB HUB-3000 (option) ..................................................................................2-33
2.5 How to Extend the Control Unit Cable (option) ................................................................2-34
2.6 Radar Connection Box RCB-002 (option)........................................................................2-38
3. ECN-303/304 (OPTION) ..........................................................................................3-1
3.1 How to Install the Console .................................................................................................3-1
3.2 How to Dismount the Rack for the Processor Unit.............................................................3-2
3.3 How to Connect External Cables .......................................................................................3-4
3.4 How to Mount the Rack for the Processor Unit..................................................................3-6
4. SETTING UP THE EQUIPMENT .............................................................................4-1
APPENDIX 1 JIS CABLE GUIDE .............................................................................AP-1
APPENDIX 2 ROD TERMINALS ..............................................................................AP-2
APPENDIX 3 RA/IF BOARD JUMPER VALUES .....................................................AP-8
PACKING LISTS ......................................................................................................... A-1
OUTLINE DRAWINGS ................................................................................................ D-1
INTERCONNECTION DIAGRAMS.............................................................................. S-1

The paper used in this manual
is elemental chlorine free.
・FURUNO Authorized Distributor/Dealer
9 52 Ashihara cho,
Nishinomiya, 662 8580, JAPAN
A
:
APR
2012
.
Printed in Japan
All rights reserved.
H2
:
APR
.
26, 2017
Pub. No.
IME-44730-H2
(
TEHI
)
FMD-3200/3200BB/3300
0 0 0 1 7 6 1 2 9 1 7

i
SAFETY INSTRUCTIONS
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or damage the equipment.
Use only the specified power cable.
Fire or damage to the equipment can result
if a different cable is used.
Attach protective earth
securely to the ship's body.
The protective earth
(grounding) is required for the
AC power supply to prevent
electrical shock.
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
WARNING
Turn off the power at the mains switch-
board before beginning the installation.
Fire, electrical shock or serious injury can
result if the power is left on or is applied
while the equipment is being installed.
ELECTRICAL
SHOCK
HAZARD
CAUTION
Observe the following compass safe
distances to prevent deviation of a
magnetic compass:
Standard
compass
Monitor Unit
(MU-190) 1.65 m 1.05 m
Monitor Unit
(MU-231) 2.55 m 1.55 m
Trackball Control
Unit (RCU-026) 0.30 m 0.30 m
Steering
compass
Intelligent HUB
(HUB-3000)
2.05 m 1.35 m
1.20 m 0.75 m
Processor
Unit (EC-3000) 2.40 m 1.55 m
Sensor Adapter
(MC-3000S)
ECDIS Control
Unit (RCU-024) 0.30 m 0.30 m
0.75 m 0.50 m
Sensor Adapter
(MC-3010A)
Sensor Adapter
(MC-3020D)
Sensor Adapter
(MC-3030D)
1.05 m 0.70 m
0.90 m 0.60 m
Mandatory Action
Prohibitive Action
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
Warning, Caution
The installer of the equipment must read the safety instructions before attempting to
install the equipment.
WARNING
Do not install the monitor unit,
processor unit or control unit where
they may get wet from rain or
water splash, or in a dusty environment.
Water in the units can result in fire,
electrical shock, or damage the equipment.
Switching HUB
(HUB-100) 1.00 m 0.60 m
Radar Connection
Box (RCB-002) 1.45 m 0.95 m
Monitor Unit
(MU-270W) 0.90 m 0.55 m

ii
SYSTEM CONFIGURATION
System with one processor unit
Note: The following monitors are available with the FMD-3200-BB:
Maker Model Viewing
distance (m) Maker Model Viewing
distance (m)
FURUNO MU-190 1.0138 Hatteland JH20T17FUD 0.8793
MU-231 1.0138 JH23T12FUD 1.0138
MU-270W 1.02 JH23T14FUD 1.0138
MU-201CE 1.0759 HD24T21MMD 0.9517
MU-231CE 1.0138 JH26T11MMD 0.9879
Hatteland JH19T14FUD 1.0138 HD26T21MMD 0.9879
Dashed lines indicate
optional or local supply
equipment.
Switching
Hub
HUB-100
Sensor Adapter
MC-3010A
Sensor Adapter
MC-3020D
Sensor Adapter
MC-3030D
Serial interface
Analog interface
Digital IN interface
Digital OUT interface
Category of units
All units protected
from the weather.
Sensor Adapter
MC-3000S
EC-3000
PROCESSOR
UNIT
100-115/220-230 VAC,
1ø, 50/60 Hz
IF Signal:
- Serial Interface x2 (IEC 61162-1/2)
- Serial Interface x6 (IEC 61162-1)
- Digital Out x6
(power fail/system fail/ NO x2, NC x2)
- Digital In (ack in)
Main Monitor* Sub Monitor
Conning
Monitor
Monitor Unit
MU-190/
MU-231/
MU-270W
Monitor Unit
MU-190/MU-231/MU-270W
HD26T21-MMD-MA4-FAGA
Monitor Unit
MU-190/
MU-231/
MU-270W
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
(Max. 2)
*: MU-190: Standard supply for FMD-3200
MU-231: Standard supply for FMD-3300
MU-270W: Standard supply for FMD-3300
HD26T21-MMD-MA4-FAGA: Standard supply for FMD-3300
100-115/200-230 VAC
1ø, 50/60 Hz
24 VDC
Intelligent Hub
HUB-3000
Radar 1
Radar Connection Box
RCB-002 Radar 2
100-230 VAC
Gateway network equipment
(radar, ECDIS, etc.)
AC-DC Power
Supply Unit
PR-240

SYSTEM CONFIGURATION
iii
System with two processor units
Note: The following monitors are available with the FMD-3200-BB:
Maker Model Viewing
distance (m) Maker Model Viewing
distance (m)
FURUNO MU-190 1.0138 Hatteland JH20T17FUD 0.8793
MU-231 1.0138 JH23T12FUD 1.0138
MU-270W 1.02 JH23T14FUD 1.0138
MU-201CE 1.0759 HD24T21MMD 0.9517
MU-231CE 1.0138 JH26T11MMD 0.9879
Hatteland JH19T14FUD 1.0138 HD26T21MMD 0.9879
EC-3000
PROCESSOR
UNIT
Dashed lines indicate
optional or local supply
equipment.
100-115/
220-230 VAC,
1ø, 50/60 Hz
Serial
interface
Analog
interface
Digital IN
interface
EC-3000
PROCESSOR
UNIT
Switching Hub
HUB-100
Digital OUT
interface
100-115/
220-230 VAC,
1ø, 50/60 Hz
Category of units
All units protected
from the weather.
Sensor Adapter
MC-3000S
Sensor Adapter
MC-3010A
Sensor Adapter
MC-3020D
Sensor Adapter
MC-3030D
IF Signal:
- Serial Interface x2
(IEC 61162-1/2)
- Serial Interface x6
(IEC 61162-1)
- Digital Out x6
(power fail/system fail/
NO x2, NC x2)
- Digital In (ack in)
IF Signal:
(Same as left.)
Main Monitor*Sub Monitor
Conning
Monitor
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
(Max. 2)
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
(Max. 2)
Gateway network
equipment
(radar, ECDIS, etc.)
Intelligent Hub
HUB-3000
Main Monitor* Sub Monitor
Conning
Monitor
100-115/
220-230 VAC,
1ø, 50/60 Hz
Monitor Unit
MU-190/MU-231/MU-270W
HD26T21-MMD-MA4-FAGA
Monitor Unit
MU-190/
MU-231/
MU-270W
Monitor Unit
MU-190/
MU-231/
MU-270W
Monitor Unit
MU-190/MU-231/MU-270W
HD26T21-MMD-MA4-FAGA
Monitor Unit
MU-190/
MU-231/
MU-270W
Monitor Unit
MU-190/
MU-231/
MU-270W
100-230 VAC
Radar 1
Radar Connection Box
RCB-002
Radar 2
100-115/200-230 VAC
1ø, 50/60 Hz
24 VDC
AC-DC Power
Supply Unit
PR-240
*: MU-190: Standard supply for FMD-3200
MU-231: Standard supply for FMD-3300
MU-270W: Standard supply for FMD-3300
HD26T21-MMD-MA4-FAGA: Standard supply for FMD-3300

iv
EQUIPMENT LISTS
Standard Supply
Console Type
Optional Supply
Name Type Code No. Qty Remarks
Monitor Unit MU-190 -
1
For FMD-3200, 19-inch
MU-231 - For FMD-3300, 23.1-inch
MU-270W For FMD-3300, 27-inch
HD26T21-MMD-
MA4-FAGA -For FMD-3300, supplied for the
HK specification.
Processor Unit EC-3000 - 1
ECDIS Control Unit RCU-024 - 1
Trackball Control Unit RCU-026 - 1
Installation Materials CP24-02100 000-020-557 1 CP24-02101 and cables
CP24-02201 001-170-810 1 For RCU-024
CP24-02301 001-170-910 1 For RCU-026
Accessories FP24-00602 001-258-610 1 For EC-3000
FP24-00701 001-170-820 1 For RCU-024
FP24-00801 001-170-920 1 For RCU-026
Spare Parts SP24-00601 001-170-660 1 For 100VAC
SP24-00602 001-170-670 1 For 220VAC
Name Type Code No. Qty Remarks
Standard
Console
ECN-303 -
1
Built-in type, monitor unit: MU-231
ECN-304 - Built-in type, monitor unit: MU-190
ECN-319 - Stand-alone type, monitor unit: MU-190
ECN-323 - Stand-alone type, monitor unit: MU-231
ECN-327 - Stand-alone type, monitor unit: MU-270W
Name Type Code No. Remarks
Sensor Adapter MC-3000S - Serial IN/OUT type
MC-3010A - Analog IN
MC-3020D - Digital IN
MC-3030D - Digital OUT
Radar Connection
Box RCB-002 - For connection of external radar
Intelligent HUB HUB-3000 -
Switching HUB HUB-100 -
AC/DC Power
Supply Unit PR-240 -
Monitor Unit MU-190 - 19-inch display
MU-231 - 23.1-inch display
MU-270W - 27-inch display
ECDIS Control Unit RCU-024 -

EQUIPMENT LISTS
v
Trackball Control
Unit RCU-026 -
Bracket Assembly OP26-5 000-016-270 For MU-190, w/knobs
OP26-15 001-116-730 For MU-231
OP26-30 001-439-060 For MU-270W
IPX2 Kit OP24-23 001-171-780 For EC-3000
Flush Mount OP24-24 001-171-790 For RCU-024
OP24-27 001-171-820 For RCU-026
Connection Stand
(19) OP24-25 001-171-800 For RCU-024, FMD-3200
Connection Stand
(23) OP24-26 001-171-810 For RCU-024, FMD-3300
Case Gasket OP24-28 001-169-970 For MC-3000S
OP24-29 001-169-960 For MC-3010A/3020D/3030D
Hood Assembly OP26-6 001-080-930 For MU-190
OP26-16 001-116-740-01 For MU-231
Flush Mount Kit OP26-12 001-116-280 For MU-190
OP26-13 001-116-290 For two MU-190s
OP26-18 000-017-273 For two MU-231s
OP26-14 001-116-300 For three MU-190s
OP26-19 000-017-274 For three MU-231s
OP26-17 001-116-750 For MU-231
Flush Mount
Assembly (Rear) OP26-31 001-439-070 For MU-270W
Mounting Bracket OP26-21 001-139-310 For MU-190
Monitor Replace-
ment Kit
OP26-22 001-139-320 For MU-190, flush mounting
OP26-23 001-139-360 For MU-190, desktop mounting
OP26-26 001-139-390 For MU-190, hood
OP26-27 001-139-570 For MU-231, desktop mounting
Control Unit
Replacement Kit OP24-31 001-181-700 For RCU-024
Hood Assembly OP26-24 001-139-370 For MU-190
OP26-25 001-139-380-01 For MU-231
Hood Assembly
(Front) OP26-32 001-439-090 For MU-270W
Hood Assembly
(Rear) OP26-33 001-439-110 For MU-270W
Connection Stand
(27) OP26-34 001-462-860 For MU-270W
Terminal Opener OP24-33 001-188-850
EC-3000 Attach-
ment Kit OP24-36 001-258-180 For EC-3000
Program Install
Software OP24-37 001-258-590
Replacement Kit OP24-50 000-027-446
Unit Mounting Base OP24-51 001-461-600 For ECN-319/323/327
FAN-LED Kit OP24-052 001-462-730 For ECN-319/323/327
Name Type Code No. Remarks

EQUIPMENT LISTS
vi
Dust Cover 26-007-1201 001-116-260-10 For MU-190
26-007-2141 001-121-240-10 For MU-231
26-009-1093 001-439-120 For MU-270W
03-163-7271 001-121-230-10 For console type
Installation Materials CP03-28900 000-082-658 LAN cable for sensor adapter, 10 m
CP03-28910 000-082-659 LAN cable for sensor adapter, 20 m
CP03-28920 000-082-660 LAN cable for sensor adapter, 30 m
CP24-02900 001-208-050 LAN cable for HUB-3000, 10 m
CP24-02910 001-208-060 LAN cable for HUB-3000, 20 m
CP24-02920 001-208-070 LAN cable for HUB-3000, 30 m
Connector CP03-28901 008-542-460
Spare Parts SP03-15001 001-042-330 For HUB-100
SP24-00801 001-235-320 For HUB-3000
Hand Grip Assembly FP03-09840 008-535-570 For MU-190/231/270W
Cable Assy. DSUB9P-X2-L5M 001-188-260 For monitor unit, 5 m
DSUB9P-X2-L5M-
WP 000-177-053-10 For monitor unit, 5 m, waterproof
type
DSUB9P-X2-L10M 001-188-270 For monitor unit, 10 m
DSUB9P-X2-L10M-
WP 000-177-247-10 For monitor unit, 10 m, waterproof
type
DSUB9P-X2-A-L5M 000-178-119-10 Brightness control cable for monitor
unit, 5 m
DSUB9P-X2-A-
L10M 000-178-120-10 Brightness control cable for monitor
unit, 10 m
MC1.5-W-L600 001-187-470-10 Between sensor adapters, 0.6 m
MC1.5-W-L1000 001-187-480-10 Between sensor adapters, 1 m
MC1.5-W-L2000 001-187-490-10 Between sensor adapters, 2 m
MC1.5-W-L3000 001-187-500-10 Between sensor adapters, 3 m
6TPSH-XH12X2-
L5.0SP2 001-186-310-10 For RCU-026, 5 m
6TPSH-XH12X2-
L10SP2 001-186-320-10 For RCU-026, 10 m
6TPSH-XH12X2-
L20SP2 001-186-330-10 For RCU-026, 20 m
6TPSH-XH12X2-
L30SP2 001-186-340-10 For RCU-026, 30 m
6TPSH-XH12X2-
L5.0SP1 001-186-260-10 For RCU-024, 5 m
6TPSH-XH12X2-
L10SP1 001-186-270-10 For RCU-024, 10 m
6TPSH-XH12X2-
L20SP1 001-186-280-10 For RCU-024, 20 m
6TPSH-XH12X2-
L30SP1 001-186-290-10 For RCU-024, 30 m
DVI-D/D S-LINK 5M 001-132-960-10 For monitor unit, 5 m
DVI-D/D S-LINK
10M 001-133-980-10 For MU-190, 10 m
DVI-BNCX5-L2000 000-177-046-10 For VDR connection
OP24-32 001-188-300 USB cable (between processor and
control units), 5 m
Name Type Code No. Remarks

EQUIPMENT LISTS
vii
Cable Assy. MJ-A10SPF0020A-
050+ 001-283-370 Cable between RCB-002 and ex-
ternal radar, 5 m
MJ-A10SPF0020A-
100+ 001-283-380 Cable between RCB-002 and ex-
ternal radar, 10 m
MJ-A10SPF0020A-
200+ 001-283-390 Cable between RCB-002 and ex-
ternal radar, 20 m
MJ-A10SPF0020A-
300+ 001-283-400 Cable between RCB-002 and ex-
ternal radar, 30 m
AI.14-8AI.34-6L430 001-460-190 For ECN-319/323/327, cable be-
tween MC-3010A/3020D/3030D
IOK-V0024-2 001-460-210
For ECN-319/323/327, cable be-
tween HUB-3000 and processor
unit
Operator’s Manual OME-44730-* 000-176-125-** English
OMJ-44730-* 000-176-124-** Japanese
LOP Instruction
Manual E42-01411-* 000-190-356-** English
Radar Instruction
Manual E42-01502-* 000-190-843-** English
Crimping Tool CRIMPFOX10S 001-206-920 For ferrule
Name Type Code No. Remarks

EQUIPMENT LISTS
viii
This page is intentionally left blank.