GE LOGIQ C9 Series User manual

GE
Technical Publication
LOGIQ C9 Series
Basic Service Manual
Direction Number: 5482298-100 English
Rev. 5
All Material Copyright © 2014-2017 by General Electric Company Inc.
All Rights Reserved.

GE
Product Information
This Manual covers the software version of R1.x.x for LOGIQ C9 Series ultrasound
system.
Copyright © 2014-2017, General Electric Company.
GE Medical Systems, a General Electric Company, going to
market as GE
Manufacturer:
GE Medical Systems (China) Co., Ltd.
No. 19, Changjiang Road
WuXi National Hi-Tech Development Zone
Jiangsu, P.R. China 214028
TEL: [phone]; FAX: [phone]
www.gehealthcare.com

LOGIQ C9 Series – Basic Service Manual i-1
5482298-100 English Rev. 5
Revision history
Revision History
List of Effected Pages (LOEP)
Please verify that you are using the latest revision of this document. Information
pertaining to this document is maintained on MyWorkshop/ePDM (GE electronic Product
Data Management). If you need to know the latest revision, contact your distributor, local
GE Sales Representative or in the USA call the GE Ultrasound Clinical Answer Center at
1 800 682 5327 or 1 262 524 5698.
Revision
Date
(YYYY/MM/DD) Reason for change
Rev.1 2014/01/09 Initial Release
Rev.2 2014/03/11 Update for transportation box
Rev.3 2016/06/30 Update spare part list
Rev.4 2016/11/18 Update spare part list
Rev.5 2017/08/23 Update spare part list
Pages Revision Pages Revision
Front Rev. 5 Chapter 6 Rev. 5
Front matter Rev. 5 Chapter 7 Rev. 5
TOC Rev. 5 Chapter 8 Rev. 5
Chapter 1 Rev. 5 Chapter 9 Rev. 5
Chapter 2 Rev. 5 Chapter 10 Rev. 5
Chapter 3 Rev. 5 Index Rev. 5
Chapter 4 Rev. 5 Rear Cover Rev. 5
Chapter 5 Rev. 5

i-2 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Important precautions
Translation policy

LOGIQ C9 Series – Basic Service Manual i-3
5482298-100 English Rev. 5

i-4 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5

LOGIQ C9 Series – Basic Service Manual i-5
5482298-100 English Rev. 5

i-6 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5

LOGIQ C9 Series – Basic Service Manual i-7
5482298-100 English Rev. 5

i-8 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5

LOGIQ C9 Series – Basic Service Manual i-9
5482298-100 English Rev. 5

i-10 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5

LOGIQ C9 Series – Basic Service Manual i-11
5482298-100 English Rev. 5

i-12 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Damage in transportation
All packages should be closely examined at time of delivery. If
damage is apparent, write “Damage In Shipment” on ALL copies
of the freight or express bill BEFORE delivery is accepted or
“signed for” by a GE representative or hospital receiving agent.
Whether noted or concealed, damage MUST be reported to the
carrier immediately upon discovery, or in any event, within 14
days after receipt, and the contents and containers held for
inspection by the carrier. A transportation company will not pay a
claim for damage if an inspection is not requested within this 14
day period.
Certified electrical contractor statement - For USA Only
All electrical Installations that are preliminary to positioning of
the equipment at the site prepared for the equipment shall be
performed by licensed electrical contractors. Other connections
between pieces of electrical equipment, calibrations and testing
shall be performed by qualified GE personnel. In performing all
electrical work on these products, GE will use its own specially
trained field engineers. All of GE’s electrical work on these
products will comply with the requirements of the applicable
electrical codes.
The purchaser of GE equipment shall only utilize qualified
personnel (i.e., GE’s field engineers, personnel of third-party
service companies with equivalent training, or licensed
electricians) to perform electrical servicing on the equipment.

LOGIQ C9 Series – Basic Service Manual i-13
5482298-100 English Rev. 5
Omission and errors
If there are any omissions, errors or suggestions for improving
this documentation, contact the GE Global Documentation
Group with specific information listing the system type, manual
title, part number, revision number, page number and
suggestion details.
Mail the
information to:
GE Medical Systems (China) Co., Ltd.
No. 19 Changiang Road
Wuxi National Hi-Tech Dev. Zone
Jiangsu
P.R.China 214028
GE employees should use TrackWise to report service
documentation issues.
These issues will then be in the internal problem reporting tool
and communicated to the writer.

i-14 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Service Safety Considerations
For a complete review of all safety requirements, refer to
Chapter 1 in the Service Manual.
DANGER DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH,
ARE PRESENT IN THIS EQUIPMENT. USE EXTREME
CAUTION WHEN HANDLING, TESTING AND ADJUSTING.
WARNING
Use all Personal Protection Equipment (PPE) such as gloves,
safety shoes, safety glasses, and kneeling pad, to reduce the
risk of injury.

LOGIQ C9 Series – Basic Service Manual i-15
5482298-100 English Rev. 5
Legal notes
The contents of this publication may not be copied or duplicated
in any form, in whole or in part, without prior written permission
of GE.
GE may revise this publication from time to time without written
notice.
Trademarks
All products and their name brands are trademarks of their
respective holders.
Copyrights
All Material Copyright © 2014-2017 by
General Electric Company Inc. All Rights Reserved.

i-16 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5

LOGIQ C9 Series – Basic Service Manual i-17
5482298-100 English Rev. 5
Table of Contents
Translation policy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-2
Damage in transportation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-12
Certified electrical contractor statement - For USA Only - - - - - - - - - - - - i-12
Omission and errors - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-13
Service Safety Considerations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-14
Legal notes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-15
Trademarks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-15
Copyrights - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-15
Table of Contents
Chapter 1 — Introduction
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-2
Manual Overview
Contents in this manual - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3
LOGIQ C9 Series models covered by this manual - - - - - - - - - - - - - - - - 1-5
Important conventions
Conventions used in book - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-6
Standard hazard icons - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-8
Product icons
Labels locations
Safety considerations
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12
Human Safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-12
Mechanical safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-15
Electrical safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-18
Dangerous procedure warnings
Lockout/Tagout (LOTO) requirements
Returning probes and repair parts
EMC, EMI and ESD
What is EMC? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-23
CE Compliance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-23
Electrostatic discharge (ESD) prevention - - - - - - - - - - - - - - - - - - - - - 1-24
Customer assistance
Contact information- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-25
Phone numbers for Customer Assistance - - - - - - - - - - - - - - - - - - - - - 1-26
System manufacturer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-26
Authorized Representative- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-27

i-18 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Chapter 2 — Site Preparations
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2
General Ultrasound system requirements
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-3
Ultrasound system environmental requirements- - - - - - - - - - - - - - - - - - 2-3
Electrical requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-6
EMI limitations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-9
Probes environmental requirements - - - - - - - - - - - - - - - - - - - - - - - - - 2-11
Time and manpower requirements - - - - - - - - - - - - - - - - - - - - - - - - - - 2-11
Facility needs
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-12
Purchaser responsibilities - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-13
Required facility needs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-14
Desirable features- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15
Minimal floor plan suggestion- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-16
Recommended floor plan suggestion - - - - - - - - - - - - - - - - - - - - - - - - 2-17
Suggested floor plan, Ultrasound system, and EchoPAC PC in same
room - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-18
Networking setup requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-18
Environmental Dangers
Patient Vicinity UL60601-1 (USA)- - - - - - - - - - - - - - - - - - - - - - - - - - - 2-22
Patient Environment IEC60601-1 and ANSI AAMI ES60601-1 - - - - - - 2-23
Chapter 3 — System Setup
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2
Setup reminders
Average setup time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-3
Setup warnings- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-3
Receiving and unpacking the equipment
Purpose of this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Warnings for receiving and unpacking - - - - - - - - - - - - - - - - - - - - - - - - 3-6
The Tilt indicator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
Receiving the LOGIQ C9 Series - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
Unpacking the LOGIQ C9 Series - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-12
Packing the Equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-16
Packing materials - recycling information
Preparing for setup
Verify customer order - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18
Physical inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18
EMI protection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18
Completing the setup
Purpose of this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19
System specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19