Genie HDI221 User manual

Model: HDI221
Digital Day/Night HD-SDI 2.1MP
Internal Dome Camera
User Guide

- 3 -
Digital Day/Night HD-SDI Internal Dome Camera
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION: To prevent electric shock and risk of fire hazards.
Do NOT use power sources other than those specified.
Do NOT expose this appliance to rain or moisture.

- 4 -
Digital Day/Night HD-SDI Internal Dome Camera
5
5
6
7
8
10
9
27
28
11
11
12
14
15
16
18
18
19
20
21
23
25
26
Contents
Dimensions
Package Contents
Focus Adjustment
Installation
General Features
Safety Instructions
Precautions
Specification
Troubleshooting
Menu Set Up
• OSD Control Keys
• Set Up Menu
• Menu Set Up
• Lens
• Exposure
• Back Light Compensation
• Day & Night
• White Balance
• DNR
• Image
• Motion Detection
• System
• Exit

- 5 -
Digital Day/Night HD-SDI Internal Dome Camera
Camera Dimensions
Package Contents
Φ150
Φ100
Φ150
114
56.5
VIDEO TEST CABLE 1EA
INSTRUCTION MANUAL 1EA
SCREW TS T1, 4X25 2EA
GREEN TERMINAL 2P MAIL 1EA SCREW PH M4X8, BK, 3EA
FOCUS CONTROL SCREW 1E
A

- 6 -
Digital Day/Night HD-SDI Internal Dome Camera
Adjusting screw for focus(Near-Far)
Adjusting screw for fix(Fix)
Adjusting screw for angle of view(TELE-WIDE)
Focus Adjustment
1) Loosen the screw in the middle.
2) Ajust angle of view by using the controller.
3) Adjust focus by using the controller.
4) Tighten the screw in the middle.

- 7 -
Digital Day/Night HD-SDI Internal Dome Camera
Camera + Installation
Cable Connection
TAPPING SCREW 4X20, 2EA
MACHINE SCREW M4X8, 3EA
SDI Output Connector
Video Output Connector
Power Input Te rminal : AC24V/DC12V

- 8 -
Digital Day/Night HD-SDI Internal Dome Camera
General Features
DNR (Digital Noise Reduction)
DNR technology utilises both an adaptive 2D filter which reduces noise in the brightness of the image
and an adaptive 3D filter which reduces noise caused by movement. The result is that the HD-SDI
camera supports Motion Adaptive DNR which removes noise and greatly reduces motion blur.
HD (High Definition) Surveillance
HD-SDI cameras provide superb surveillance images compared to a normal VGA camera.
WDR (Wide Dynamic Range)
WDR is a powerful and ultra advanced technology that captures cleaner and superior high resolution
images even where they appear dark due to a strong back light presence.
HLC (High Light Compensation)
High Light Compensation function is especially effective for reading car number plates at night time. Users
can select and define the required observation area for the target object and ignore strong highlight areas.
Illumination
With an incredible minimum illumination of 0.5 Lux, images can be captured even in extremely low light
conditions and signal noise is significantly reduced by the ultra advanced DNR (Digital Noise Reduction)
technology.
Privacy Zone
Privacy Zones can be set to block viewing for specific areas in the picture.
Additional Functions
OSD - On Screen Display menu
P rivacy Masking - 32 zones, Sens-Up - x64 times, Digital Zoom - x8
DNR
Digital
Reduction
Noise
Illumination
Minimum
High Definition
HD
DSP
3D-DNR
OSD
Privacy Zone
HLC
Wide Dynamic Range
Digital
WDR
DNR
Digital
Reduction
Noise
Illumination
Minimum
High Definition
HD
DSP
3D-DNR
OSD
Privacy Zone
HLC
Wide Dynamic Range
Digital
WDR
DNR
Digital
Reduction
Noise
Illumination
Minimum
High Definition
HD
DSP
3D-DNR
OSD
Privacy Zone
HLC
Wide Dynamic Range
Digital
WDR
DNR
Digital
Reduction
Noise
Illumination
Minimum
High Definition
HD
DSP
3D-DNR
OSD
Privacy Zone
HLC
Wide Dynamic Range
Digital
WDR
DNR
Digital
Reduction
Noise
Illumination
Minimum
High Definition
HD
DSP
3D-DNR
OSD
Privacy Zone
HLC
Wide Dynamic Range
Digital
WDR
DNR
Digital
Reduction
Noise
Illumination
Minimum
High Definition
HD
DSP
3D-DNR
OSD
Privacy Zone
HLC
Wide Dynamic Range
Digital
WDR
DNR
Digital
Reduction
Noise
Illumination
Minimum
High Definition
HD
DSP
3D-DNR
OSD
Privacy Zone
HLC
Wide Dynamic Range
Digital
WDR

- 9 -
Digital Day/Night HD-SDI Internal Dome Camera
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Do not expose the camera to rain
or spill liquids on it.
Do not install or use the camera in an
environment where the humidity is high.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-20°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
If it gets wet, wipe dry immediately.
Liquids can contain minerals that
corrode the electronic components.
If exposed to radioactivity the CCD
will fail.
NOTE
Precautions
Do not install or use the camera in an
environment where the humidity is high.
* If the camera is exposed to
spotlight or object reflecting
strong light, smear or blooming
may occur.
* Please check that the power
satisfies the normal
specification before connecting
the camera.
Severe lighting which changes or flickers
can cause the camera to work improperly.

- 10 -
Digital Day/Night HD-SDI Internal Dome Camera
Safety Instructions
Precautions for use
Please handle this camera carefully
This camera should be installed by a qualified person only.
There are no user serviceable parts inside.
Do not disassemble this camera other than to make initial adjustments.
Only use a CE approved regulated DC12V, or AC24V power supply.
Use appropriate low voltage power cable to prevent fire or electrical shock.
Please ensure that your installation area can support the weight of the camera.
Do not use strong or abrasive detergents when cleaning the camera.
Only use soft non-abrasive materials to clean the polycarbonate dome.
Do not expose the camera to direct sun.
Do not install the camera in places where humidity is high.
Do not install near cooling or heating devices.
Do not expose the camera to rain or moisture.

- 11 -
Digital Day/Night HD-SDI Internal Dome Camera
OSD Control Keys
1. Control keys are used to access and operate the OSD menu.

- 12 -
Digital Day/Night HD-SDI Internal Dome Camera
SET UP MENU DEFAULT SET
INDOOR
OUTDOOR
RETURN
MANUAL
BRIGHTNESS
AUTO
Manual
AGC
RETURN
RETURN
H - POS
V - POS
H - SIZE
V - SIZE 0 ~ 20 Level Selectable
RETURN
WE IGHT
RETURN
COLOUR
B/W
DELAY
RETURN
AGC THRES
MARGIN
DELAY
RETURN
ATW
PRESET
R - GAIN
B - GAIN
RETURN
AWB
SHARPNESS
GAMMA
COLOUR GAIN0 ~ 20 Level Selectable
MIRROR
FLIP
D - ZOOM x1 ~ x8 Level Selectable
D - WDR
ON
ZONE NUM
ZONE DISP
H - POS
V - POS
H - SIZE
V - SIZE
Y LEVEL
CR LEVEL
CB LEVEL
RETURN
OFF
RETURN
SENSITIVITY
DET H - POS
DET V - POS
DET H - SIZE
DET V - SIZE
MOTION OSD
ALARM
RETURN
OFF
CAM ID
BAUDRTE
ID DISPLAY
RETURN
FRAME RATE
CVBS
RESETON
RETURN
EXIT
25 FPS / 30 FPS Selectable
NTSC / PAL Selectable
PUSHING
LENS
COM.(Option)
DAY/NIGHT
DNR
ON
AUTO
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
ON / OFF Selectable
MANUAL
MOTION
PRIVACY ZONE
SYSTEM
0 ~ 40 Level Selectable
0 ~ 60 Level Selectable
0 ~ 40 Level Selectable
0 ~ 20 Level Selectable
0 ~ 60 Level Selectable
0 ~ 20 Level Selectable
2400 / 4800 / 9600 / 57600 / 115200 Selectable
ON
0 ~ 40 Level Selectable
ON / OFF Selectable
ON / OFF Selectable
0 ~ 31 Level Selectable
ON / OFF Selectable
MENU
0 ~ 60 Level Selectable
0 ~ 40 Level Selectable
0 ~ 40 Level Selectable
0 ~ 20 Level Selectable
ON / OFF Selectable
OFF /LOW / MIDDLE / HIGH Level Selectable
SHADING 1% ~ 100% Level Selectable
OFF
MODE
DC
SHUTTE R1/25,1/30, 1/60, 1/50, FLK , 1/240, 1/500, 1/1000, 1/2000, 1/4000,
1/8000,1/16000, 1/30000, 1/60000
x2 , x3, x4, x8, x16, x32, x64 Level Selectable
OFF
SENS -UP
O.45, 0.5, 0. 55, 0.6, 0.65 Level Selectable
ON / OFF Selectable
EXPOSURE
HLC
0~20 Level Selectable
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
BLC
WDR
EXTLOW / MIDDLE / HIGH Level Selectable
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
LOW / MIDDLE / HIGH
LOW / MIDDLE / HIGH Level Selectable
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
PUSHING
LOW / MIDDLE / HIGH Level Selectable
BACKLIGHT
OFF
OFF
0 ~ 10 Level Selectable
IMAGE
0 ~ 20 Level Selectable
0 ~20 Level Selectable
Setup Menu
How to Set Up the Camera Menu

- 13 -
Digital Day/Night HD-SDI Internal Dome Camera
SET UP MENU DEFAULT SET
INDOOR
OUTDOOR
RETURN
MANUAL
BRIGHTNESS
AUTO
Manual
AGC
RETURN
RETURN
H - POS
V - POS
H - SIZE
V - SIZE 0 ~ 20 Level Selectable
RETURN
WE IGHT
RETURN
COLOUR
B/W
DELAY
RETURN
AGC THRES
MARGIN
DELAY
RETURN
ATW
PRESET
R - GAIN
B - GAIN
RETURN
AWB
SHARPNESS
GAMMA
COLOUR GAIN 0 ~ 20 Level Selectable
MI RROR
FLIP
D - ZOOM x1 ~ x8 Level Selectable
D - WD R
ON
ZONE NUM
ZONE DISP
H - POS
V - POS
H - SIZE
V - SIZE
Y LEVE L
CR LEVEL
CB LEVEL
RETURN
OFF
RETURN
SENSITIVITY
DET H - POS
DET V - POS
DET H - SIZE
DET V - SIZE
MOTION OSD
ALARM
RETURN
OFF
CAM ID
BAUDRTE
ID DISPLAY
RETURN
COLOURSPACE
FRAME RATE
CVBS
RESETON
RETURN
EXIT
OFF/COLOUR1 / COLOUR2 / COLOUR3 Selectable
25 FPS / 30 FPS Selectable
NTSC / PAL Selectable
PUSHING
LENS
COM. (O ption)
DAY/NIGHT
DNR
ON
AUTO
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
ON / OFF Selectable
MANUAL
MOTION
PRIVACY ZONE
SYSTEM
0 ~ 40 Level Selectable
0 ~ 60 Level Selectable
0 ~ 40 Level Selectable
0 ~ 20 Level Selectable
0 ~ 60 Level Selectable
0 ~ 20 Level Selectable
2400 / 4800 / 9600 / 57600 / 115200 Selectable
ON
0 ~ 40 Level Selectable
ON / OFF Selectable
ON / OFF Selectable
0 ~ 31 Level Selectable
ON / OFF Selectable
MENU
0 ~ 60 Level Selectable
0 ~ 40 Level Selectable
0 ~ 40 Level Selectable
0 ~ 20 Level Selectable
ON / OFF Selectable
OFF /LOW / MIDDLE / HIGH Level Selectable
SHADING1% ~ 100% Level Selectable
OFF
MODE
DC
SHUTTE R1/25,1/30, 1/60, 1/50, FLK , 1/240, 1/500, 1/1000, 1/2000, 1/4000,
1/8000,1/16000, 1/30000, 1/60000
x2 , x3, x4, x8, x16, x32, x64 Level Selectable
OFF
SENS -UP
O.45, 0.5, 0. 55, 0.6, 0.65 Level Selectable
ON / OFF Selectable
EXPOSURE
HLC
0~ 20 Level Selectable
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
BLC
WD R
EXTLOW / MI DDLE / HIGH Level Selectable
0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
LOW / MI DDLE / HIGH
LOW / MI DDLE / HIGH Level Selectable
WH ITE BAL0 ~ 20 Level Selectable
0 ~ 20 Level Selectable
PUSHING
LOW / MIDDLE / HIGH Level Selectable
BACKLIGHT
OFF
OFF
0 ~ 10 Level Selectable
IMAGE
0 ~ 20 Level Selectable
0 ~20 Level Selectable

- 14 -
Digital Day/Night HD-SDI Internal Dome Camera
Menu items can be selected by using the camera OSD buttons.
1. Press the Set Up button.
The Set Up menu will be displayed on the monitor.
Menu Set Up
SETUP
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF
2. Move and select the required function using the Up and Down buttons.
SETUP
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF

- 15 -
Digital Day/Night HD-SDI Internal Dome Camera
3. Change menu settings using the Left or Right buttons.
Available values or status's are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After changing the setting, move the arrow indicator to EXIT and press the SET button to
EXIT.
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right buttons.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol is display "- - - -"
Lens
DC: DC Auto Iris Lens
Manual: C-Mount Lens
3. Press RETURN to go back to the SETUP menu.
SETUP
DC
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF
MODE
RETURN
OUTDOOR

- 16 -
Digital Day/Night HD-SDI Internal Dome Camera
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen, select EXPOSURE by using the Up or Down buttons.
2. Select the desired brightness mode by pressing the Left or Right buttons.
Exposure
SETUP
EXPOSURE
3. Brightness can be adjusted. The brightness control range is 1 ~ 20.
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
10
AUTO
X32
16

- 17 -
Digital Day/Night HD-SDI Internal Dome Camera
EXPOSURE
EXPOSURE
EXPOSURE
NOTE
*Shutter: Select Shutter using the Left or Right buttons, you can adjust the shutter speed
from AUTO to MANUAL (1/25,1/50,FLK,1/240,1/500,1/1000,1/2000,1/4000,1/8000,1/16000,
1/30000,1/60000)
4. Select the desired shutter mode by pressing the Left or Right buttons.
5. SENS-UP: Select the desired Sens-Up mode by pressing the Left or Right buttons.
6. AGC: Select the desired AGC mode by pressing the Left or Right buttons.
At night and/or in dark conditions, the Sens-Up mode can be selected to desired value from x2 ~ x64
AGC mode can be selected to desired value from 0 ~ 20. (If the level of the AGC increases, noise can also be increased.)
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
10
AUTO
X32
16
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
10
AUTO
X32
16
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
10
AUTO
X32
16

- 18 -
Digital Day/Night HD-SDI Internal Dome Camera
SETUP
NOTE
Day / Night
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF
Images can be displayed in either colour or black and white.
1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen.
HLC (High Light Compensation): If the scene contains extremely bright light areas such as; from car headlights,
the light can mask out much of the on-screen detail.
LEVEL: Adjust the level of the HLC function.
BLC: Enables a user to directly select a desired area from a picture, and to view the area more clearly.
TOP / BOTTOM / LEFT / RIGHT: Adjust the area to be enhanced.
WDR: The camera delivers clear high quality pictures even in backlight, by increasing exposure in dark areas while
decreasing it in bright areas; thereby producing a corrected image with clear details.
LOW / MIDDLE / HIGH: Adjust the level of WDR.
Back Light Compensation (BLC)
This camera uses DSP to provide intelligent light level control to overcome even strong backlight conditions.
1. On the Set Up menu screen, select BACKLIGHT by using the Up or Down buttons.
*Backlight: Select Backlight using the Left or Right buttons. You can choose OFF / HLC / BLC and WDR.

- 19 -
Digital Day/Night HD-SDI Internal Dome Camera
2. Select the desired mode using the Left and Right buttons.
COLOUR: The picture is always displayed in colour.
BW: This picture is always displayed in black and white.
AUTO: The mode will automatically switch to COLOUR in normal conditions and switch to BW mode when ambient
illumination is low.
Press the SET button to set the switching time or AGC THRES (AGC), MARGIN (AGC) in AUTO mode.
DELAY: You can select the duration time about changing the day/night mode.
EXTERN: Select delay level LOW / MIDDLE / HIGH
SETUP
SETUP
White Balance
The White Balance function is used to control the “on-screen” colours.
1. Move the arrow indicator to WHITE BALANCE on the SETUP menu screen using the Up and Down buttons.
2. Select the desired mode by using the Left or Right buttons.
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF

- 20 -
Digital Day/Night HD-SDI Internal Dome Camera
DNR is used to reduce the level of background noise in a low luminance environment.
1. Move the arrow indicator to DNR by using the Up and Down buttons.
DNR
SETUP
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
COLOR
ATW
MIDDLE
OFF
Three user selectable White Balance settings are available.
ATW: (Auto Tracking White Balance)
Normalsetting;whenthecolourtemperaturerangeisfrom1,800˚Kto10,500˚K.(Ex:afluorescentlamporoutdoors)
AWB: The White Balance is automatically adjusted in a specific environment.
PRESET: To obtain the best results, press the SET button while the camera is focused onto white paper.
If the environment, and/or light source change, the White Balance will require re-adjustment.
MANUAL: Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC and then
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain (Red) and B-Gain (Blue) while
monitoring the colour of the image.
2. Select OFF / LOW / MIDDLE / HIGH for 3DNR by using the Left and Right buttons.
: motion adaptive temporal IR filtering
: edge preserving & ghost elimination
: adaptive weight control by noise level