Gima 30940 Parts list manual

M30940-M-Rev.0.03.17
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
[email protected] - [email protected]
www.gimaitaly.com
USE AND MAINTENANCE BOOK
ATTEnTIOn: The operators must carefully read and completely understand
the present manual before using the product.
Fabbricante
Manufacturer
30940
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
Made in China
Teme l’umidità
Keep dry
Conservare al riparo della luce solare diretta
Keep away from sunlight
GIMA LED HEADLIGHT 5W - BLACK

5
Thank you for purchasing this product. To prevent damage to your product or injury to yourself or to
others, read the following safety precaution in their entirety before using this equipment. Keep these
safety instructions where all those who use the product will read them.
Symbols
Attention: Read User’s Guide for cautions and instructions for use
CLASS II
Internal electrical power source
Warnings and Cautions
This product must not be used in the presence of ammable gases.
This product should not be immersed in uids.
Do not shine the light directly into the patient’s eyes.
Ensure that the headband power cord is located in the clips provided. The headlight body
should not be left covered with a cloth or similar.
Federal law restricts this device to sale or order of a physician.
1. Purpose and Features of the product
1.1 Purpose
The headlight is used for examination and surgical operation in multifarious microsurgery.
1.2 Features
•Light Source: Our LED without the heat of traditional Halogen headlight. With a color temperature
of 6000 Kelvin, this light supplies bright, white, shadow-free light allowing the doctor to see tissue
characteristics without distortion.
•EnjoytheexibilityofoperatingtheheadlightusingtherechargeableLithiumbattery,canusewithout
the direct power source. It is one of the most comfortable lightweight headlights and suitable for
all kinds of surgery.
•The headlight could be used when it is charging.
•Has low-battery indicator light.
•Adapts to any Binocular Loupes of GIMA.
•Smart design, convenient for mobile diagnosis.
2. Operating Instructions
Attach the power cord by means of the clip provided. Place the instrument on your head and adjust for
widthandheighttothatittscomfortably.
Connect the Headlight to the power adapter. Switch it on and use the headband right or left brightness
control knob to select the required brightness.
Loosenthexingscrewtoadjustthelightheadupanddownandbackwardsorforwards.Afteradjustment,
re-tightenthescrew.Theilluminatedeldofviewcanbeselectedbymeansoftheslidecontrol.
3. Maintenance
3.1 Battery charging and replacing
During charging the LEDs operate sequentially, in use they remain switched on. If the LEDs remain
switchedo󰀨,theunitisnon-operationalorthebatteryisswitchedo󰀨.Thenumberofilluminatedor
ENGLISH

6
sequentially-switched LEDs indicates the state of charge of the Li-ion battery. The state of charge is
shown whether an instrument is connected or not.
All four LEDs illuminated indicated a fully-charged battery,
IfonlytheyellowLEDilluminated,thebatterymustberecharged.Switcho󰀨thebatteryandrechargeit
by means of the transformer.
Caution: Please use the appropriate battery. The battery should never be placed in municipal
waste. Please check local regulations for disposal of batteries.
3.2 Battery use and care
The capacity of Lithium battery will be changed by it’s using condition. For maximum battery capacity, use
the battery in room temperature ( 10 °C ~ 40 °C ). Do not expose the battery to extreme temperatures,
if the battery is used in high or low temperatures, the battery capacity will be reduced.
The old batteries should never be placed in municipal waste.
3.3 Cleaning and sterilization
•The outer surface of the instrument may be cleaned with wet cloth, the remaining stains can be
cleanedo󰀨withthemixtureof50%alcoholand50%distilledwater.Donotwipewithanycorrosive
detergent lest that the surface should be damaged.
•Cleaning the lenses: Mirror-cleaning paper or a drop of liquid solvent (50% alcohol and 50% aether)
may be used to clean the lens, blow it carefully. If there is dust stained on the lens, blow them with
a blowball or brush them with a dust pen.
Caution: Be careful to prevent the solvent into the instrument.
4. Technical Specication
Optical specications
420mm illumination light spot 20-80mm
Illuminationin200mmworkingdistance ≥75000lx
Adjustable range:
Fluctuation distance 12.5mm
Angle range Vertical ±25°
Weight: Headlight (excluding head band) 69g
Electrical specications
Illumination Source Extremely bright light, 5W LED, life 20000 hours
continuous burn, do not need to change the LED lamp.
Battery 7.4VLithiumbattery
BatteryRun-time Notlessthan7hourscontinuousruntimeonafully 
charged battery.
Battery Charging-time Not more than 5 hours
Rating Adapter Voltage 100VAC-240VAC 50Hz/60Hz
Maximum Adapter Input Power 15VA
Power Adapter Output 12V DC 1250mA
Electrical Safety EN60601-1,EN60601-1-2 / CLASS II / Internal
electrical power source
ENGLISH

7
Environment requirements
Operation:
Environment Temperature +10 °C - +40 °C
RelativeHumidity 30%-75%
AtmosphericPressure 700hPa-1060hPa
Storage:
Environment Temperature -40 °C - +55 °C
Relative Humidity 10% - 90%
Atmospheric Pressure 500 hPa - 1060 hPa
Disposal: The product must not be disposed of along with other domestic waste. The users
must dispose of this equipment by bringing it to a specic recycling point for electric and
electronic equipment.
For further information on recycling points contact the local authorities, the local recycling
center or the shop where the product was purchased. If the equipment is not disposed of
correctly, nes or penalties may be applied in accordance with the national legislation and
regulations.
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product.
This product meets high qualitative standards both as regards the material and the production. The
warranty is valid for 12 months from the date of supply of GIMA.
During the period of validity of the warranty, GIMA will repair and/or replace free of charge all the defected
parts due to production reasons. Labor costs and personnel traveling expenses and packaging not
included.
All components subject to wear are not included in the warranty.
The repair or replacement performed during the warranty period shall not extend the warranty.
The warranty is void in the following cases: repairs performed by unauthorized personnel or with non-
original spare parts, defects caused by negligence or incorrect use.
GIMA cannot be held responsible for malfunctioning on electronic devices or software due to outside
agentssuchas:voltagechanges,electro-magneticelds,radiointerferences,etc.
The warranty is void if the above regulations are not observed and if the serial code (if available) has
been removed, cancelled or changed.
The defected products must be returned only to the dealer the product was purchased from. Products
sent to GIMA will be rejected.
ENGLISH