GLITZHOME 2000900001 User manual

Get social with us and discover more about our products, tips and exclusive discounts!
ASSEMBLY INSTRUCTION
DINING CHAIR
Please carefully unpack and identify each component before beginning assembly.
Before you begin, please refer to parts list to make sure that you have all parts. Please
take care when assembling the unit and always place the parts on a clean, soft surface.
If you require assistance with assembly or parts, please call 888-357-7263.

Assembly Instruction 1
PRE-ASSEMBLY PREPARATION
• CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this
item,please kindly return it in it's original packaging.
• WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled
and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
• CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals
for cleaning. Clean with mild soap on a soft rag. Rinse and dry thoroughly.
• MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
BACK (A) SEAT (B) FRONT LEG (C)
Qty: 2 Qty: 2 Qty: 4
Qty: 8
SPRING WASHER (G)
Qty: 18
ALLEN BOLT (D)
Qty: 18
FLAT WASHER (H)
M8X75MM
Qty: 2
ALLEN KEY (E)
Qty: 10
ALLEN BOLT (F)
M8X60MM
PARTS LIST
HARDWARE LIST

Assembly Instruction
2
A
C
PLEASE CAREFULLY UNPACK AND IDENTIFY EACH COMPONENT BEFORE BEGINNING ASSEMBLY. BEFORE YOU BEGIN, PLEASE
REFER TO PARTS LIST TO MAKE SURE THAT YOU HAVE ALL PARTS.
STEP-BY-STEP ASSEMBLY
B

Assembly Instruction 3
STEP 1
Attach the Front Legs (C) to the Seat (B) by using Flat Washer (H), Spring Wahser
(G),Allen Bolt (D) and Allen Key (E). Please tighten the bolts to 90%.
STEP 2
Attach the Seat (B) to the Back (A) by using Flat Washer (H), Spring Wahser (G),
Allen Bolt (F) and Allen Key (E). Please tighten the bolts to 90%.
C
B
GH D E
AF
G
H
B

Assembly Instruction
4
STEP 3
Use body weight to adjust balance of chair, then tighten all the screws 100% all the
way.
STEP 4
Stick the black fabric cover to the seat back as shown in below.
After initial assembly, the product may acclimate to its new environment. Please
ensure all screws are still securely tightened.
Reminder!!
Use Adjustable Leveler
to adjust the level of
chair if necessary.



