GLITZHOME 2008600014 User manual

Get social with us and discover more about our products, tips and exclusive discounts!
ASSEMBLY INSTRUCTION
ACCENT CHAIR
Please carefully unpack and identify each component before beginning assembly.
Before you begin, please refer to parts list to make sure that you have all parts. Please
take care when assembling the unit and always place the parts on a clean, soft surface.
If you require assistance with assembly or parts, please call 888-357-7263.

Assembly Instruction 1
PRE-ASSEMBLY PREPARATION
• CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this
item,please kindly return it in it's original packaging.
• WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled
and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
• CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals
for cleaning. Clean with mild soap on a soft rag. Rinse and dry thoroughly.
• MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
BACK (A) RIGHT SIDE FRAME (D)SEAT (B) SEAT FRAME
CONNECTION (C)
Qty: 1 Qty: 1 Qty: 2 Qty: 1
Qty: 4 Qty: 4
ALLEN WRENCH (J)
Qty: 1Qty: 4
ALLEN BOLT (I)ALLEN BOLT (G) ALLEN BOLT (H)
M6X20MM M6X45MMM6X25MM
BACK FRAME
CONNECTION (F)
Qty: 1
LEFT SIDE FRAME (E)
Qty: 1
PARTS LIST
HARDWARE LIST

PLEASE CAREFULLY UNPACK AND IDENTIFY EACH COMPONENT BEFORE BEGINNING ASSEMBLY. BEFORE YOU BEGIN, PLEASE
REFER TO PARTS LIST TO MAKE SURE THAT YOU HAVE ALL PARTS.
STEP-BY-STEP ASSEMBLY
STEP 1
Connected the Right Side Frame (D) and the Left Side Frame (E) by using Seat
Frame Connections (C) as shown in below diagram.
Assembly Instruction
2
STEP 2
Attached the Seat (B) to the Right Side Frame (D) and Left Side Frame (E) by using
Allen Bolt (H) and Allen Wrench (J) as shown in below diagram.
Please 80% tighten the bolts.
E
C
D
C
B
J
H

STEP 3
Attached the Seat (B) to the Seat Frame Connections (C) by using Allen Bolt (G)
and Allen Wrench (J) as shown in below diagram.Please 80% tighten the bolts.
STEP 4
Attached the Back Frame Connection (F) to the Right Side Frame (D) and Left Side
Frame (E) as shown in below diagram.
Assembly Instruction 3
G
J
F

Assembly Instruction
4
STEP 5
Attached the Back (A) to the Back Frame by using Allen Bolt (I) and Allen Wrench
(J) as shown in below diagram.Please 80% tighten the bolts.
STEP 6
Please 100% tighten all Allen Bolts (G,H,I) completely by using Allen Wrench (J) .
After initial assembly, the product may acclimate to its new environment. Please
ensure all screws are still securely tightened.
I
J
A



