GLITZHOME ACCENT CHAIR 2008600009 User manual

Assembly Instruction
ACCENT CHAIR

1
PRE-ASSEMBLY PREPARATION
FLAT WASHER (F)
Qty: 10 Qty: 2
HARDWARE LIST
ALLEN BOLT (E)
PARTS LIST
BACK (A) FRONT RAIL (D)SEAT (B) CHAIR FRAME (C)
Qty: 1 Qty: 1 Qty: 2 Qty: 1
ALLEN WRENCH (H)GASKET (G)
Qty: 4 Qty: 1
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•
M8 x 55MM

2
STEP 2
Attach the Front Rail (D) to the Chair Frames (C) by using Allen Bolt (E) and Allen
Key (H) from two sides as shown in below diagram.
STEP 1
Open the Non-woven fabric cover at the back of Seat (A) as shown in below diagram,
then attach the Seat (B) to the Back (A) by using Flat Washer (F), Allen Bolt (E) and
Allen Key (H).
C
C
B
D
A
H
E
E
H
H
E
F

3
STEP 3
Attach the Chair Frame (C) to the Back (A) by using Allen Bolt (E) and Allen Key (H)
from two sides as shown in below diagram.
STEP 4
Glue the Gasket (G) to the bottom of legs as shown in below diagram.
A few days after initial assembly, the product may acclimate to its new environment.
Please ensure all screws are still securely tightened.
HE
A
B
G
C