GLITZHOME 2000800001 User manual

Assembly Instruction
Rocking Chair

1
PARTS LIST
SEAT (A) ROCKING BAR (B) BACK BASE FRAME (C)
Qty: 1 Qty: 2 Qty: 1
Qty: 8 Qty: 8 Qty: 8
HARDWARE LIST
BOLT (G)
Qty: 1
ALLEN KEY (H)
Qty: 1
FRONT BASE FRAME (D)
WASHER (E)
Qty: 1
ALLEN KEY (I)
M4
M6 x 25MM M6
NUT (F)
PRE-ASSEMBLY PREPARATION
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•

2
STEP 2
Attach the Rocking Bar (B) to the Base Frame by using Blot (G), Washer (E), Nut (F),
Allen Key (H, I) as shown in below diagram.
Please use Allen Key (I) to tighten the Nut (F) clockwise, meantime use Allen Key (H)
to tighten the Bolt (G) counterclockwise.
STEP 1
Fix the Front Base Frame (D) and Back Base Frame (C) as shown in below diagram.
C
D
C
D
Front
E
B
B
F
I
G
H
Front
Front
Front
DB
E
G
H
IF

3
STEP 3
STEP 4
After initial assembly, the product may acclimate to its new environment. Please ensure all
screws are still securely tightened.
Attach the Seat (A) to the Base Frame by using Blot (G), Washer (E), Nut (F), Allen
Key (H,I) as shown in below diagram.
Please use Allen Key (I) to tighten the Nut (F) clockwise, meantime use Allen Key (H)
to tighten the Bolt (G) counterclockwise.
A
E E
F
I
G
H
F
I
G
H