GLITZHOME BAR STOOL User manual

Assembly Instruction
BAR STOOL

1
PARTS LIST
BACK (A) SEAT (B) LEG (C)
Qty: 1 Qty: 1 Qty: 2 Qty: 1
FOOTREST (D)
Qty: 4 Qty: 5
ALLEN WRENCH (H)
Qty: 1
Qty: 4
HARDWARE LIST
ALLEN BOLT (G)ALLEN BOLT (E) ALLEN BOLT (F)
PRE-ASSEMBLY PREPARATION
M6X25MM M6X30MM M6X45MM
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•
Kindly Reminder: Two bags of hardware separately inside the carton.
One bag for one stool to assemble.

2
F
H
STEP 2
Fix the two Legs (C) by using Allen Bolt (F) and Allen Wrench (H) as shown in below diagram.
STEP 1
Attach the Back (A) to the Seat (B) by using Allen Bolt (F) and Allen Wrench (H) as shown
in below diagram.
B
A
80％
C
F
H

3
STEP 3
Attach the Legs (C) to the Seat (B) by using Allen Bolt (G) and Allen Wrench (H)
as shown in below diagram.
STEP 4
Attach the Footrest (D) to the Legs (C) by using Allen Bolt (E) and Allen Wrench (H)
as shown in below diagram.
D
80％
G
H
H
E
80％

4
STEP 6
After initial assembly, the product may acclimate to its new environment. Please ensure all
screws are still securely tightened.
STEP 5
Please tighten all the bolts 100% all the way.
100％
H