GLITZHOME GH2000600001 User manual

Assembly Instruction
DINING CHAIR

1
PARTS LIST
BACK (A) SEAT (B) FRONT LEG (C)
Qty: 1 Qty: 1 Qty: 2
Qty: 9 Qty: 1 Qty: 4
HARDWARE LIST ( 1 set in a plastic bag)
ADJUSTABLE
LEVELER (F)
Qty: 9
SPRING WASHER (G)ALLEN BOLT (D)
Qty: 9
FLAT WASHER (H)
M8 x 55MM
ALLEN KEY (E)
PRE-ASSEMBLY PREPARATION
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING:DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•
Kindly Reminder: Two bags of hardware separately inside the carton.
One bag for one stool to assemble.

2
STEP 2
Attach the Seat (B) to the Back (A) by using Flat Washer (H), Spring Wahser (G), Allen Bolt (D)
and Allen Key (E).
Insert and tighten the Adjustable Leveler (F) to the bottom of the legs.
STEP 1
Attach the Front Legs (C) to the Seat (B) by using Flat Washer (H), Spring Wahser (G),
Allen Bolt (D) and Allen Key (E).
C
GH D E
B
F
A
F
D
G
H
B

3
STEP 3
STEP 4
Stick the black fabric cover to the seat back as shown in below.
After initial assembly, the product may acclimate to its new environment. Please ensure
all screws are still securely tightened.
Use body weight to adjust balance of chair, then tighten all the screws 100% all the way.
Reminder!!
Use Adjustable Leveler (F) to
adjust the level of chair
if necessary.